ARMY MIL-C-63063-1976 CASE CARTRIDGE 40MM M169 PLUG BASE FOR《M169型40MM炮弹筒 插头基地》.pdf
《ARMY MIL-C-63063-1976 CASE CARTRIDGE 40MM M169 PLUG BASE FOR《M169型40MM炮弹筒 插头基地》.pdf》由会员分享,可在线阅读,更多相关《ARMY MIL-C-63063-1976 CASE CARTRIDGE 40MM M169 PLUG BASE FOR《M169型40MM炮弹筒 插头基地》.pdf(20页珍藏版)》请在麦多课文档分享上搜索。
1、Ja71iIMILITAR SPECIFICATIONMIL-c-60996A (PA):5 Aug-2.AFPLICABLEDC)CUlNTS” ,.,.- ,. . . . . . .“. .-“2.1 The following. documents ”ofthe Issue- in ef;eet ondate of invitation for bids or request” for proposals, form apart of this specification to the extent specified”herein.SPECIFICATIONS “ ;*MILITAR
2、Y. . ., ,“MIL-P-116 -MIL-A-48078 -,., .,.,STANDARDSFEDERALFED-STD-151 -, . . . .,. .,- ,. ,preservaton, Packaging,. .Methodsof. , .Ammunition, Standard Quality”Assurance Provisions, GeneralSpecification For - . , . . ,-,.,.,. .,Metals; Test MethodsProvided by IHSNot for ResaleNo reproduction or netw
3、orking permitted without license from IHS-,-,-MIL-c-60996A (PA)MILITARYMIL-STD-105 - Sampling Procedures and Tables forInspection by Attributes (ABC-STD-105)MIL-STD-1168- Lot Numbering of AmmunitionDRAWINGS*U.S. ARMY PICATINNY ARSENAL9216715 - Box, Wirebound, Packing, Ammunitionfor Charge, Demolitio
4、n Roll, M1869297231 - Charge, Demolition Assembly M186(Copies of specifications, standards, and drawings requiredby suppliers in connection with specific procurement func-tions should be obtained from the procuring activity or asdirected by the contracting officer).*(For meaning of asterisk see para
5、graph 6.4)3* REQUIREMENTS3.1 Material. - Materials and parts shall be in accord- 8ante with applicable drawings and specifications.3.1.1 Reclaimed material. - A blend of reclaimed andvirgin plastic material may be used provided the requirementsof this specification are met. The blend shall be limite
6、d to70 percent minimum virgin material. The reclaimed materialshall be clean scrap, free from any type of foreign materialnot related to the blend. Floor sweepings will not be acceptedas clean scrap.3”2-“ - The assembly shall comply with all re-quirements spec fied on drawing (dwg.) 9297231 and with
7、 allrequirements specified in applicable specifications.2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-60996A, .(PA) ;3.3 .Susceptibility to cracking. - The reel parts “assembly(see dwg. 9211.461) shall not crack or separate. when subjectedto
8、 temperature conditioning at ti,nus 65 degrees Fahrenheit, plusor minus 5 degrees, for a period of 24 hours, plus or minus lt2hour. 3.4 liorkmanshi.- All parts and assemblies shall be fab-ricated and loaded in a thorough.wo,rkm”anlikemanner, and allmanufacturing, processing, and “assembly operations
9、 sha11 be cor-rectly performed. They shall be clean and free of burrs, sharpedges, unblended radii, surface defects, chips, dirt, grease andoil (except where specifically required),. holes, tears, voids,porosity, warpage, excess flush, cracks, chipped edges, blisters,corrosionproducts and other fore
10、ign matter. lhe cleaningmethodused shall notbe injurious to any part or assembly nor shall they be contaminated by the cleaningagent. Exterior surface , :coatings shall be continuous except for a few light scratchesnot exposing base material. All required markings shall be neatand sharply defined. .
11、, , ,.,3.5 First article inspection. - The specification containstechnical provisions for first article inspection. Requirementsfor the. submission of first article, samples by the.contractorshall be as specified in the contract. .,.4. QUALITY, ASSURANCE PROVISION? ,-., ,. , . .,.4.1 Responsibility
12、for inspection. - The responsibility forinspection shall comply with MIL-A-48 078 (PA). . , ,4.101.Submission of product; -,At the time each,completed .,lot of items deliverable under the contract is submitted”t,othe.Government for acceptance, the contractor shallsupply the fol-lowing information.ac
13、companied by a certificate,which.atteststhat the information provided is correct and applicable to the.,product being submitted: .- , ,a. A statement that the lot complies with all of thequality assurance provisions specified in this.specification.b. Drawing and specification number and date, togeth
14、erwith identification and date of changes thereto.A statement that all material purchased by the con-tractor ;ets requirements, when such material is controlled byGovernment or commercial specifications referenced in any of the3Provided by IHSNot for ResaleNo reproduction or networking permitted wit
15、hout license from IHS-,-,-MIL-C-60996A (PA)contractual documents, and that certificates of conformance areon file and available for review.d. Number of items in the lot.e. Date submitted.The certificate shall be signed by a responsible agent of thecertifying organization. The initial certificate sub
16、mittedshall be substantiated by evidence of the agents authorityto bind his principal. Substantiation of the agents authoritywill not be required with subsequent certificates unless, dur-ing the course of the contract, this authority is vested inanother agent of the certifying organization.4.2 Class
17、ification of inspections. - See MIL-A-480784.3 First article inspection. - Prior to the start of regularproduction the contractor shall submit a first article sample to aGovernment approved facility (see 6.2b) as designated by thecontracting officer for evaluation in accordance with the pro-visions
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
本资源只提供5页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ARMYMILC630631976CASECARTRIDGE40MMM169PLUGBASEFORM169 40 MM 炮弹 插头 基地 PDF

链接地址:http://www.mydoc123.com/p-441997.html