1、MIL-T-b2072C m 9999906 1754918 288 m w I * NOT MEASUREMENT SENSITIVE MIL-T-S072C 19 Februarv 1993 SUPERSEDING MIL-T-62072B(AT) 12 August 1987 MILITARY SPECIFICATION TRAILERS, CABLE REEL: HYDRAULICALLY DRIVEN, MODIFIED COMMERCIAL This specification is approved for use by all Departments and Agencies
2、of the Department of Defense. 1. SCOPE * 1.1 Scope. This specification covers cable reel trailers that have hydraulically powered cable reel handling capabilities and that are self- propelled through a hydraulically powered landing wheel. Hydraulic power is supplied by a diesel engine driven hydraul
3、ic pump. this specification are commercial items which are required to be warranted by the manufacturer as specified in acquisition documents. Vehicles procured under * 1.2 Classification. The trailer shall be one of the following types, as specified (see 6.2): Single axle - 5450 kilogram (kg) (12,0
4、00 pound) payload capacity Tandem axle - 9070 kg (20,000 pound) payload capacity. comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: US Army Tank-Automotive Command, ATTN: AMSTA-UED, Warren, MI 48397-5000, by
5、 using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A I FSC-2330 I DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networkin
6、g permitted without license from IHS-,-,-MIL-T-62072C 979990b 1754719 114 = MIL-T-62072C 2. APPLICABLE DOCUMENTS 2.1 Government documents. * 2.1.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the - extent specified h
7、erein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). SPECIFICATIONS FEDERAL W-B-131 MIL I TARY * MIL-P-514 * MIL-T-5624 - MI
8、L-H-46170 - * MIL-T-83133 - MIL-H-83282 - * STANDARDS FEDERAL FED-STD-297 MILITARY MIL-STD-1223 - MIL-STD-1474 - MIL-STD-1595 - MS 51118 - MC 51336 MS 51339 * (Unless otherwise indicated, Battery, Storage: Vehicular, Ignition, Lighting and Starting. of Plates, Identification, Instruction and Marking
9、, Blank. Turbine Fuel, Aviation, Grades JP-4 and JP-5. Hydraulic Fluid, Rust Inhibited, Fire- Resistant, Synthetic Hydrocarbon Base. Turbine Fuel, Aviation, Kerosene Type, Grade JP-8. Hydraulic Fluid, Fire-Resistant, Synthetic Hydrocarbon Base, Aircraft. Rustproofing of Commercial (Nontactical) Vehi
10、cles. Nontactical Wheeled Vehicles Treatment, Painting, Identification Marking and Data Plate Standards. Noise Limits for Army Materiel. Qualification of Aircraft, Missile and Aerospace Fusion Welders. Pintle Assembly, Towing - 40,000 Lbs. Capacity, Manual Release. Lunette-Coupler, Drawbar, Ring. Co
11、upler, Drawbar, Ring-Offset (Taper Shank). copies of federal and military 5 specifications, standards, and handbooks are available from the Naval Publications and Forms Center, Military Specifications and Standards, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) 2 Provided by IHSNot for
12、 ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-b2072C m 999990b L354920 93b m i. MIL-T-62072C * 2.1.2 Other Government documents, drawings, and publications. The following other Government documents, drawings, and publications form a part of this document to the ex
13、tent specified herein. the issues are those cited in the solicitation. Unless otherwise specified, * DEPARTMENT OF DEFENSE Department of Defense Index of Specifications and Standards (DODISS). (Copies of the DODISS are available on a yearly subscription basis either from the Government Printing Offi
14、ce for hard copy, or microfiche copies are available from the Director, Navy Publication and Printing Service Office, 700 Robbins Avenue, Philadelphia, PA 19111-5093.) DEPARTMENT OF TRANSPORTATION (DOT) Federal Motor Carrier Safety Regulations (FMCSR). Federal Motor Vehicle Safety Standards (FMVSS).
15、 * Federal Regulations, 49 CFR, and the Federal Register, and should be addressed to the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.) (Application for copies of DOT publications should reference the Code of * OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OS
16、HA) Code of Federal Regulations, 29 CFR. (Application for copies of OSHA publications should reference the Code of Federal Regulations, 29 CFR, and the Federal Register and should be addressed to the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.) * 2.2 Non-Gov
17、ernment publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted are those listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of do
18、cuments not listed in the DODISS are the issues of the documents cited in the solicitation (see 6.2). * AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) ASME Boiler and Pressure Vessel Code (BPVC) Section IX - Qualification Standard for Welding and Brazing Procedures, Welders, Brazers, and Welding an
19、d Brazing Operators. (Application for copies of ASME publications should be addressed to the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.) 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS
20、-,-,-MIL-T-b2072C W 99999Ob L75492L 872 W MIL-T-62072C * AMERICAN WELDING SOCIETY (AWS) AWS B2.1 - Standard for Welding Procedure and AWS D1.l - Structural Welding Code-Steel. Performance Qualifications. (Application for copies of AWS publications should be addressed to the American Welding Society,
21、 2501 NW 7th Street, Miami, FL 31025.) * THE EUROPEAN TYRE AND RIM TECHNICAL ORGANISATION (ETRTO) Standards Manual. (Application for copies of ETRTO publications should be addressed to the European Tyre and Rim Technical Organisation, 32, Avenue Brugmann, 1060 Brussels, Belgium.) * SOCIETY OF AUTOMO
22、TIVE ENGINEERS, INC. (SAE) SAE Standards and Recommended Practices 5350 - Spark Arrester Test Procedure ?or Medium 5537 - Storage Batteries. 5551 - Performance Levels and Methods of Size Engines (DOD Adopted). Measurement of Electromagnetic Radiation from Vehicles and Devices (30-1000 MHz). 5560 - S
23、even-Conductor Electrical Connector for Truck-Trailer Jumper Cable. 5682 - Rear Wheel Splash and Stone Throw Protection (DOD Adopted). 5697 - Safety Chain of Full Trailers or Converter Dollies. 51067 - Seven-Conductor Jacketed Cable for Truck-Trailer Connections. J1292 - Automobile, Truck, Truck Tra
24、ctor, Trailer and Motor Coach Wiring. (Application for copies of SAE publications should be addressed to SAE, Inc., 400 Commonwealth Drive, Warrendale, PA 15096.) THE TIRE AND RIM ASSOCIATION, INC. Year Book. * (Application for copies of Tire and Rim Association publications should be addressed to t
25、he Tire and Rim Association, Inc., 175 Montrose West Ave., Copley, OH 44321.) * (Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informationa
26、l services.) 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-b2072C m 9999906 1754922 709 m MIL-T-62072C * 2.3 Order of precedence. in the event of a conflict between the text of this document and the references cited herein, the text of this
27、 document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS * 3.1 Standard vehicle and accessories. Except as specified in 3.1.1 through 3.1.1.13.4, the vehicle, components, assemblies, and a
28、ccessories to be delivered under the contract shall be standard or optional items which meet or exceed the requirements of this specification. represented and rated in the vehicle and equipment manufacturers technical data. Technical data shall be limited to specifications and technical material, id
29、entical to that furnished to the authorized company representatives for selection of vehicle models and components and shall be available to the engineering offices of the procuring activity, prior to delivery of the items. The vehicle shall be a standard commercial trailer, of a model sold to a sig
30、nificant number of buyers other than the Gover?Imnt, in the course of normal business operations. All items shall ke as 3.1.1 Special requirements. in addition to the standard vehicle and components specified in 3.1, the vehicle shall be furnished with special equipment as specified herein. * 3.1.1.
31、1 Treatment and painting. The vehicle shall be treated and painted in accordance with MIL-STD-1223. activity for the appropriate military service (see 6.2), the exterior calor shall be in accordance with MIL-STD-1223. As specified by the procuring * 3.1.1.2 Markings and data plates. As specified by
32、the procuring activity for the appropriate military service (see 6.2), identification markings and data plates shall be in accordance with MIL-STD-1223. * 3.1.1.2.1 Data plates. Data plates showing a schematic of all hydraulic valves, valve controls, equipment, and complete instructions for operatin
33、g the hydraulic components shall be fastened an the inside of the curbside cabinet door. Data plates shall conform to composition A (class 1 or 2) or composition C of MIL-P-514. * 3.1.1.3 Rustproofing. The vehicle shall be rustproofed in accordance with FED-STD-297. * 3.1.1.4 Brake lights. At least
34、one pair of brake lights shall override the four-way emergency flasher or the two systems shall, be independent of each other. Modifications to the manufacturers standard product to accommodate this requirement shall not compromise conformance to any Federal Motor Carrier Safety Regulation reference
35、d herein or to any Federal Motor 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-tlIL-T-b2072C W 90b L75Y923 645 = MIL-T-62072C Vehicle Safety Standard. If additional lights are added to the vehicle, the lights shall be selected from the trailer ma
36、nufacturers standard matching hardware. * 3.1.1.5 Welders and welding. In addition to the requirements of 3.23.4, all welders employed in the fabrication of the trailer shall be certified, before any welding is accomplished, in accordance with MIL-STD-1595; the welding qualifications of the ASME BPV
37、C, Section IX; or AWS B2.1 or D1.l. The certification that the welders have passed the qualifications test shall be on file at the contractors facility and shall be available for review by the Government. * 3.11.6 Lubrication chart. An illustrated or schematic diagram type lubrication chart shall be
38、 provided on the trailer. attention to all lubrication fittings and specify the range and grade of lubricants required for critical temperatures. The chart shall be permanently attached to the trailer in a readily visible location. shall be inscribed on a plate conforming to composition A (class 1 o
39、r 2) or composition C of MIL-P-514. The chart shall direct The chart 3.1.1.7 Drain plugs. All drain plugs installed throughout the vehicle for the purpose of draining lubricants shall be of the permanent magnet type. 3.1.1.8 Lunette. The coupling device specified in 3.11 shall be a lunette conformin
40、g to MS 51336. The coupling device shall also be of the offset type conforming to MS 51339 or shall provide equivalent vertical adjustment of not less than 100 mm (4 inches). 3.1.1.9 Pintle assembly. The pintle assembly on the rear tow bar, as specified in 3.12.2, shall conform to MS 51118. * 3.1.1.
41、10 Noise level. If the noise level at the operators position exceeds 84 decibels (db(A) when measured in accordance with MIL-STD-1474, a warning plate reading: “CAUTION: HEARING PROTECTION REQUIRED“ shall be permanently affixed to the trailer in a conspicuous location at the operators position. stat
42、ionary and all systems operating at maximum governed speed and rated loads. The plate shall conform to composition A (class 1 or 2) or composition C of MIL-P-514. The noise level shall be determined with the vehicle * 3.1.1.11 24-volt lighting. * 3.1.1.11.1 Independent 24-volt dc system. When specif
43、ied (see 6.2), in addition to the standard 12-volt ,direct current (dc) lighting system (see 3.13 through 3.13.7), a 24-volt dc lighting system, independent of the 12-volt dc lighting system, shall be provided. Separate wiring and bulbs shall be provided for the 24-volt dc system. The system shall c
44、onform to 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-62072C D 9999906 1754924 581 MIL-T-62072C 3.13. The 24-volt dc system shall also conform to the Federal Motor Carrier Safety Regulations referenced in 3.13.1, except the 24-volt dc sto
45、p and turn lamps shall be combined. * 3.1.1.11.2 Interconnected 24-volt dc system. When specified (see 6.2), capability of operating the normal 12-volt dc system from a towing vehicle equipped with a nominal 24-volt dc electrical system shall be provided. * 3.1.1.11.3 Receptacle for 24-volt dc syste
46、m. When either an independent or interconnected 24-volt dc system is specified, the front of the trailer shall also be equipped with a 12-contact receptacle and cover conforming to MS 75021, part number MC 75021-1. accordance with SAE J702. The 24-volt dc, 12-contact receptacle shall be connected to
47、 the lights as follows: The receptacle shall be located in Contact B. Connect to left-hand turn signal and stop lamp (yellow) Contact D. Connect to ground (white) Contact E. Connect to clearance, side marker, identification, and tail lamps (black and brown) Contact J. Connect to right-hand turn sign
48、al and stop lamp (green). Contact L. Connect to ground (white). The remaining contacts shall not be connected. (military design) trucks are combination stop and turn indicator circuits. On the interconnected 24-volt dc system, the normal 12-volt dc turn signal lights will function both as turn signa
49、ls and stop lights, and the normal 12-volt dc stop lights will not be operational when the trailer is connected to a towing vehicle with a 24-volt dc power supply. condition, the stop light (red) circuit is not connected to the 24-volt, 12-contact receptacle. Circuits B and J on tactical Because of this * 3.1.1.11.4 Resistors. When an interconnected 24-volt dc system is specified, the 12-contact receptacle shall be provided with resistance in each c
