1、 Reference numberISO 5356-2:2006(E)ISO 2006INTERNATIONAL STANDARD ISO5356-2Second edition2006-09-01Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectors Matriel danesthsie et de ranimation respiratoire Raccords coniques Partie 2: Raccords vis suppo
2、rtant un certain poids National Standard of CanadaCAN/CSA-Z5356-2-08International Standard ISO 5356-2:2006 (second edition, 2006-09-01) has been adopted with Canadiandeviations (MOD) as CSA Standard CAN/CSA-Z5356-2-08, which has been approved as a National Standardof Canada by the Standards Council
3、of Canada.ISBN 978-1-55436-707-8 February 2008Legal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints a
4、nd interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided
5、 without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual pr
6、operty rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, ME
7、MBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION,
8、 LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
9、, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this docum
10、ent is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publis
11、hes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or elect
12、ronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade
13、 secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redre
14、ss for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA s
15、hall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informa
16、tional and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document. Limited copies of this docum
17、ent in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached st
18、andard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such cop
19、ies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.NameOrganizationAddressCityProvince/StateCountry Postal/Zip CodeE-mailI consent to CSA collecting and using the above information to send me updates re
20、lating to this publication.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.CAN/CSA-Z5356-2-08CSA Standards Update ServiceCAN/CSA-Z5356-2-08February 2008Title: Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded w
21、eight-bearing connectorsPagination: 12 pages (CSA/1CSA/4, iiv, and 4 text)Automatic notifications about any updates to this publication are available.To register for e-mail notifications, and/or to download any existing updates in PDF, enter the Online Store at www.ShopCSA.ca and click on My Account
22、 on the navigation bar.The List ID for this document is 2418786.To receive printed updates, please complete and return the attached card.AffranchirsuffisammentPlaceStamp HereASSOCIATION CANADIENNE DENORMALISATIONBUREAU CENTRAL DE LINFORMATION5060, SPECTRUM WAY, BUREAU 100MISSISSAUGA ON L4W 5N6CANADA
23、CANADIAN STANDARDSASSOCIATIONCONSOLIDATED MAILING LIST5060 SPECTRUM WAY, SUITE 100MISSISSAUGA ON L4W 5N6CANADAThe Canadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the Nation
24、al Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional
25、organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, compan
26、ies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships
27、 together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards development activities. The Association offers certification and testing services in support of and as an extension to its standards development acti
28、vities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects products that bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection
29、 and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet its corporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services
30、 through the use of standards, certification and related services to meet national and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is thecoordin
31、ating body of the National StandardsSystem, a coalition of independent, autonomousorganizations working towards the furtherdevelopment and improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof
32、 advancing the national economy, benefiting thehealth, safety, and welfare of the public, assistingand protecting the consumer, facilitating domesticand international trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or
33、 reviewed by an accredited Standards Development Organization (SDO) and approved by the SCC according to the requirements of CAN-P-2. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of ca
34、pable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard
35、which is capable of making a significant and timely contribution to the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standa
36、rd.The responsibility for approving standards as National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Stan
37、dard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationNational Standard of CanadaPublished in February 2008 by Canadian Standards AssociationA no
38、t-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-Z5356-2-08Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectorsPrep
39、ared byInternational Organization for StandardizationApproved byStandards Council of CanadaRegistered trade-mark of Canadian Standards AssociationReviewed byCAN/CSA-Z5356-2-08Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectorsFebruary 2008 Canadi
40、an Standards Association CSA/3CAN/CSA-Z5356-2-08Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectorsCSA PrefaceThis is the first edition of CAN/CSA-Z5356-2, Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bea
41、ring connectors, which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Standardization) Standard 5356-2 (second edition, 2006-09-01). This Standard was reviewed for Canadian adoption by the CSA Subcommittee on Anaesthetic Equipment, under the j
42、urisdiction of the CSA Technical Committee on Anaesthetic Equipment, Respiratory Technology, and Critical Care Equipment and the Strategic Steering Committee on Health Care Technology, and has been formally approved by the Technical Committee. This Standard has been approved as a National Standard o
43、f Canada by the Standards Council of Canada.February 2008 Canadian Standards Association 2008All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. ISO material is reprinted with permission. Where the words “this Inter
44、national Standard” appear in the text, they should be interpreted as “this National Standard of Canada”.Inquiries regarding this National Standard of Canada should be addressed toCanadian Standards Association5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-40
45、00www.csa.caTo purchase CSA Standards and related publications, visit CSAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.CAN/CSA-Z5356-2-08Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectorsCSA/4 Canadian Standar
46、ds Association February 2008Canadian deviations2 Normative referencesAdd the followingThe following National Standard of Canada, published by the Canadian Standards Association, is an adoption of an ISO Standard. The requirements of this CSA Standard shall take precedence over the International Stan
47、dard on which it is based; any reference in CAN/CSA-Z5356-2 to the International Standard shall be replaced by a reference to the equivalent Canadian Standard.CAN/CSA-Z5356-1-08Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and socketsReference numberISO 5356-2:2006(E)ISO 200
48、6INTERNATIONAL STANDARD ISO5356-2Second edition2006-09-01Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectors Matriel danesthsie et de ranimation respiratoire Raccords coniques Partie 2: Raccords vis supportant un certain poids ISO 5356-2:2006(E)
49、PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the
