DIN EN 14197-2 Berichtigung 1-2007 en 4666 Cryogenic vessels - Static non-vacuum insulated vessels - Part 2 Design fabrication inspection and testing German version EN 14197-2 2003.pdf

《DIN EN 14197-2 Berichtigung 1-2007 en 4666 Cryogenic vessels - Static non-vacuum insulated vessels - Part 2 Design fabrication inspection and testing German version EN 14197-2 2003.pdf》由会员分享，可在线阅读，更多相关《DIN EN 14197-2 Berichtigung 1-2007 en 4666 Cryogenic vessels - Static non-vacuum insulated vessels - Part 2 Design fabrication inspection and testing German version EN 14197-2 2003.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、July 2007 English price group 99No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 23.020.40!$K;B“1402431www.din.deDDIN E

2、N 14197-2 Corrigendum 1www.beuth.deCryogenic vessels Static non-vacuum insulated vessels English version of DIN EN 14197-2:2006-11Kryo-Behlter Ortsfeste, nicht vakuum-isolierte Behlter DIN EN 14197-2:2006-11Part 2: Design, fabrication, inspection and testing Corrigendum 1 toTeil 2: Bemessung, Herste

3、llung und Prfung Berichtigung 1 zur englischen FassungThis corrigendum should be filed together with the translation of the standard to which it refers and a corresponding note made on the translation. Document comprises 7 pagesDIN EN 14197-2 Cor. 1:2007-07 2 This Corrigendum is based on EN 14197-2:

4、2003/AC:2006. In the English version of DIN EN 14197-2:2006-11 the following corrections are to be made: Replace the following figures: Figure 4b) Figure 5 DIN EN 14197-2 Cor. 1:2007-07 3 Figure 11 Re Figure 12 Figure 12c): Modify to read “flat plate welded into the shell from one side only” Design

5、factor C: for s 3 s1= 0,45 for s 3 s1 = 0,50 Figure 12e): Modify to read “flat plate welded into the shell from both sides” Design factor C: for s 3 s1= 0,35 for s 3 s1= 0,40 DIN EN 14197-2 Cor. 1:2007-07 4 Replace Figure 13 and modify the key as follows: Key 1 Rectangle 2 Ellipse Y Design factor CE

6、 X Ratio f/e Rectangular plates Elliptical plates f = short side of the rectangular plate f = short side of the elliptical plate e = long side of the rectangular plate e = long side of the elliptical plate 70 C.5.2.3.2 4.3.5.4 Flat ends C.5.2.3.2 4.3.5.5 Openings in cylinders, spheres and cones C.5.2.3.5 C.7.3.1, fourth paragraph; replace “(C.1)” by “(C.8)” Figure E.1