1、I A-A-53445 65 = 7799774 0030707 T m A-A-5 3 4 4 5 29 April 1988 COMMERCIAL ITEM DESCRIPTION SUPPORT, ANKLE (Elastic) The General Services Administration has authorized the use of this Commercial Item Description. This Commercial Item Description covers the requirements for three sizes of an elastic
2、 ankle support. Salient characteristics: The ankle support shall be a cotton knit, elastic, washable, reusable, and individually sealed, in the following sizes: Small - 7-8 inches (18 - 20 cm) Medium - 8-1/4 - 9 inches (21.6 - 22.9 cm) Large - 10-1/4 - 11 inches (26 - 27-1/2 cm) The support shall be
3、 a 4 inch wide woven dual tension brace. The support shall have “figure 8 wrapn style for maximum support between the foot and leg. It shall not bind or constrict circulation. It shall be spirally constructed for good fit and to prevent rolling or binding. It shall be individually packaged in a clea
4、n unsterile condition. 0 Workmanship. The ankle support shall be free from defects which detract from its appearance or impair its serviceability. Unit. Package (PG). One package containing twelve individually packaged ankle supports, as specified, constitutes one unit. Quality Assurance Provisions.
5、 t t Responsibility for inspection. Unless otherwise specified in he contract or purchase order, the contractor is responsible for he performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any
6、 facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The AMSC N/A FSC 6515 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. THIS DOCUMENT CONTAINS PAGES. Provided by IHSNot for ResaleNo reprod
7、uction or networking permitted without license from IHS-,-,-A-A-5 3 4 4 5 Government: reserves the right to perform any o the inspections aet Eorth in the specification where such inspections are deemed neceasary to assuxe supplies and services coneorm to prescribed requirements. Records. Records of
8、 examinations and tests performed by or or the contractor shall be maintained by the contractor and made available to the Government upon the Governments request, at any timer or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies
9、to which such records relate. Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use o special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item
10、, Tests, Tests shall be conducted to determine compliance with specification requirements. Where feasible, the same sample &hall be used for the determination of two or more test chaxacteriBtics. 3, Sampling foi: examination shall be conucted in accordance with MIL-STD-105, with an AQL of 1,O (perce
11、nt defective) and an inspection level o II, The unit o pocluct or examination purposes ehall be one ankle support as specified in this description. DeEects Suppo% not: made of a cotton knit. Support riot free o tears, cuts, holes, or perforations. Weight of support not correct. Support not free of g
12、rease, dirt, or foreign mateial. First- article inspection. First article inspection shall be gerkocmecl on the ankle support when a first article sample is required. Thig inspection shall include the examination and tests. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted witho
13、ut license from IHS-,-,-A-A-53qq5 65 W 777797q 0030709 3 W A-A- 5 3 4 4 5 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerances specified using conversion tables conta
14、ined in the latest revision of Federal Standard 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine i
15、f the product is acceptable. The contracting officer has the option of accepting or rejecting the product. Contractor certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications,
16、 standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Federal Food, Drug and Cosmetic Act. If the product covered by this docume
17、nt has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/ contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulg
18、ated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations. Recovered materials. The offeror/contractor is encourag
19、ed to use recovered material in accordance with Public Law 94-580, as amended, and as implemented by Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-53Y45 h5 W 349497Y
20、 0030710 T A-8-53445 Preservation, packaging, packing, labeling, and marking, Unless otherwise specified, preservation, packaging, and packing shall be to a degree OP protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipm
21、ent from the supply source to the receiving activity, plus reshipment from receiving activity, and ahall conform to applicable caxriers rules and regulations. Intermediate and exterior package quantities and labeling and marking shall be as specified in the contract and/or order. NOTE: document: The
22、 following National Stock Numbers are covered by this Small - 6515-01-153-4853 Mdium - 6515-01-248-4819 Large - 6515-01-153-4854 Ordering data, Intermediatdexterior package quantities, labeling, and marking must: be specified in the contract and/or order MILITARY INTERESTS: PREPARING ACTIVITY: Custodians: DoD - MB Army - MD Navy - MS Air Force - 03 Agent: DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OCS PBS FDA-MPQAS Project No. 6515-4103 Location: CID/A-SUPPORT/H18-29 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
