copy模块

e the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of p

copy模块Tag内容描述:

1、e the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards, Bulletins and other technical publications shall not in any respect preclude any member or nonmember of CEA from manufacturing or selling products not conforming to such Standards, Bulletins or 。

2、ew York, NY 10016-5997, USA6 November 2001IEEE Power Engineering SocietySponsored by theTransmission and Distribution CommitteeIEEE StandardsPrint: SH94945PDF: SS94945The Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2001 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 6 November 2001. Printed in the United States of America.Print:ISBN 0-7381-2936-4 SH94945PDF:ISBN 0-7381-2937-5 SS94。

3、d be filed in front of MIL-STD-804C, dated 30 April 1990.MIL-STD-804C is inactive for new applications and shall not be used on new programsafter 1 June 1995. New programs for which formats and coding of aperture, camera, copy, andtabulating cards are required shall utilize digital media criteria based on current JointEngineering Data Management and Information Control System (JEDMICS) requirements.Follow-up on procurements for programs that have been using MIL-STD-804C maycontinue to use MIL-ST。

4、OPY, AND TABULATING CARDS r, AMSC NIA AREA EDRS DOSTRIBUTION STATEMENT A. Approved for public release; distribution ir unlimited. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-804C FOREWORD 1. This standard is approved for use by al 1 Departments and Agencies of the Department of Defense. 2. User comments (recommendations, corrections, addit。

5、Insulators CompositeDistribution Deadend Type Secretariat: National Electrical Manufacturers Association Approved: October 2012 Published: July 2013 American National Standards Institute, Inc. NOTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participati。

6、upersedes 9-GP-5 1 M Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 7-53-73 SX l1874h.50 0023832 618 = The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed is a government agency within the Federal Department of Supply and Services. CGSB is engaged in the production of voluntary standards in a wide r。

7、ARCH 1975 Engineering Deportment ELECTRONIC INDUSTRIES ASSOCIATION NOTICE EIA engineering standards are designed to serve the J?.Ublic interest through eliminting mis understandings between manufacturers and purchasers, facllitating interchangeability and improve ment of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence. of such standards shall not in any respect pre clude any member or non-member of EIA fro。

8、ished by:Society of Automotive Engineers, Inc.400 Commonwealth DriveWarrendale, PA 15096-001U.S.A.Phone: (724) 776-4841Fax: (412) 776-5760STANDARDANSI 892.1-1996Approved by the AmericanNational Standards InstituteInvolute Splinesand InspectionSponsored bySociety of Automotive Engineers, Inc.American Society of Mechanical EngineersPublished by:Society of Automotive Engineers, Inc.400 Commonwealth DriveWarrendale, PA 15096-0001U.S.A.Phone: (412) 776-4841Fax: (412) 776-5760DEDICATIONThis docum。

9、Insulators CompositeDistribution Deadend Type Secretariat: National Electrical Manufacturers Association Approved: October 2012 Published: July 2013 American National Standards Institute, Inc. NOTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participati。

10、ARCH 1975 Engineering Deportment ELECTRONIC INDUSTRIES ASSOCIATION NOTICE EIA engineering standards are designed to serve the J?.Ublic interest through eliminting mis understandings between manufacturers and purchasers, facllitating interchangeability and improve ment of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence. of such standards shall not in any respect pre clude any member or non-member of EIA fro。

11、e (MOC) Pipeline operators shall apply their formal MOC process as required in 49 CFR Part 195.446(f). The MOC process should include the requirements of API 1167, Section 14 and API 1160, Section 13. The requirements of the two API documents may be tailored to accommodate the unique aspects of LDSs. Changes to any aspects of LDSs (technical, physical, procedural, and organizational) should follow the pipeline operators formal MOC process. Pipeline Leak Detection Program Management API REC。

12、2011 Dartmouth College,Goals for this session,Learn what is covered by copyright Understand what you can and cant do legally with copyrighted materials Reflect on copyright retention Learn how to protect your rights as an author,September 13, 2011,This is an educational program,I am not a lawyer, nor do I play one on TV. Only an attorney can provide a legal opinion on a specific application of the law.,September 13, 2011,Poisons and medicine are oftentimes the same substance given with differen。

13、ion and their use UDC 001.816:655.25.8:51BS5261-3:1989 This British Standard, having been prepared under the directionof the Paper and PrintingStandards Policy Committee, was published underthe authority of the BoardofBSI and comes intoeffecton 30June1989 BSI 03-2000 First published as BS1219 June1945 First revision December 1958 Second revision as BS 5261-3 June1989 The following BSI references relate to the work on this standard: Committee reference PAM/22 Draft for comment 85/65602 DC 。

14、0g3g38g50g51g60g53g44g42g43g55g3g47g36g58requirements, marks for copy preparation and proof correction, proofing procedureICS 01.140.40; 37.100.001Copy preparation and proof correction Part 2: Specification for typographic BRITISH STANDARDBS 5261-2:2005BS 5261-2:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 19 August 2005 BSI 19 August 2005First published as BS 1219 April 1945First revision December 1958Second revision as BS 。

【copy模块】相关PPT文档
【copy模块】相关PDF文档
NEN 2390-1992 Copy preparation《版式处理》.pdf

相关标签

标签 > copy模块[编号:334935]

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1