NFPA 1221-2016 Standard for the Installation Maintenance and Use of Emergency Services Communications Systems (Effective Date June 15 2015).pdf

1、NFPA 1221 Standard for the Installation, Maintenance, and Use of Emergency Services Communications Systems 2016 Edition NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471 An International Codes and Standards OrganizationIMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA DOCUMENTS NOTICE AND DISCLAIMER

2、OF LIABILITY CONCERNING THE USE OF NFPA DOCUMENTS NFPA codes, standards, recommended practices, and guides (“NFPA Standards”), of which the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This pr

3、ocess brings together volunteers representing varied viewpoints and interests to achieve consensus on re and other safety issues. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the

4、accuracy of any information or the soundness of any judgments contained in NFPA Standards. The NFPA disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the pub

5、lication, use of, or reliance on NFPA Standards. The NFPA also makes no guaranty or warranty as to the accuracy or completeness of any information published herein. In issuing and making NFPA Standards available, the NFPA is not undertaking to render professional or other services for or on behalf o

6、f any person or entity. Nor is the NFPA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonabl

7、e care in any given circumstances. The NFPA has no power, nor does it undertake, to police or enforce compliance with the contents of NFPA Standards. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certication or other stat

8、ement of compliance with the requirements of this document shall not be attributable to the NFPA and is solely the responsibility of the certier or maker of the statement. REMINDER: UPDATING OF NFPA STANDARDS Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should

9、 be aware that NFPA Standards may be amended from time to time through the issuance of Tentative Interim Amendments or corrected by Errata. An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any Tentative Interim Amendment and any Errata then i

10、n effect. In order to determine whether an NFPA Standard has been amended through the issuance of Tentative Interim Amendments or corrected by Errata, visit the Document Information Pages on NFPAs website. The Document Information Pages provide up-to-date, document specic information including any i

11、ssued Tentative Interim Amendments and Errata. To access the Document Information Page for a specic NFPA Standard, go to http:/www.nfpa.org/docinfo to choose from the list of NFPA Standards or use the search feature on the right to select the NFPA Standard number (e.g., NFPA 101). In addition to pos

12、ting all existing Tentative Interim Amendments and Errata, the Document Information Page also includes the option to sign-up for an “Alert” feature to receive an email notication when new updates and other information are posted regarding the document. ISBN: 978-145591184-4 (Print) ISBN: 978-1455912

13、21-6 (PDF)IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS ADDITIONAL NOTICES AND DISCLAIMERS Updating of NFPA Standards Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that these documents may be superseded at any time by the issuance

14、of new editions or may be amended from time to time through the issuance of Tentative Interim Amendments or corrected by Errata. An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any Tentative Interim Amendments and any Errata then in effect.

15、In order to determine whether a given document is the current edition and whether it has been amended through the issuance of Tentative Interim Amendments or corrected through the issuance of Errata, consult appropriate NFPA publications such as the National Fire Codes Subscription Service, visit th

16、e NFPA website at www.nfpa.org, or contact the NFPA at the address listed below. Interpretations of NFPA Standards A statement, written or oral, that is not processed in accordance with Section 6 of the Regulations Governing the Development of NFPA Standards shall not be considered the ofcial positi

17、on of NFPA or any of its Committees and shall not be considered to be, nor be relied upon as, a Formal Interpretation. Patents The NFPA does not take any position with respect to the validity of any patent rights referenced in, related to, or asserted in connection with an NFPA Standard. The users o

18、f NFPA Standards bear the sole responsibility for determining the validity of any such patent rights, as well as the risk of infringement of such rights, and the NFPA disclaims liability for the infringement of any patent resulting from the use of or reliance on NFPA Standards. NFPA adheres to the p

19、olicy of the American National Standards Institute (ANSI) regarding the inclusion of patents in American National Standards (“the ANSI Patent Policy”), and hereby gives the following notice pursuant to that policy: NOTICE: The users attention is called to the possibility that compliance with an NFPA

20、 Standard may require use of an invention covered by patent rights. NFPA takes no position as to the validity of any such patent rights or as to whether such patent rights constitute or include essential patent claims under the ANSI Patent Policy. If, in connection with the ANSI Patent Policy, a pat

21、ent holder has led a statement of willingness to grant licenses under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such a license, copies of such led statements can be obtained, on request, from NFPA. For further information, contact the NFPA

22、 at the address listed below. Law and Regulations Users of NFPA Standards should consult applicable federal, state, and local laws and regulations. NFPA does not, by the publication of its codes, standards, recommended practices, and guides, intend to urge action that is not in compliance with appli

23、cable laws, and these documents may not be construed as doing so. Copyrights NFPA Standards are copyrighted. They are made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,

24、 and the promotion of safe practices and methods. By making these documents available for use and adoption by public authorities and private users, the NFPA does not waive any rights in copyright to these documents. Use of NFPA Standards for regulatory purposes should be accomplished through adoptio

25、n by reference. The term “adoption by reference” means the citing of title, edition, and publishing information only. Any deletions, additions, and changes desired by the adopting authority should be noted separately in the adopting instrument. In order to assist NFPA in following the uses made of i

26、ts documents, adopting authorities are requested to notify the NFPA (Attention: Secretary, Standards Council) in writing of such use. For technical assistance and questions concerning adoption of NFPA Standards, contact NFPA at the address below. For Further Information All questions or other commun

27、ications relating to NFPA Standards and all requests for information on NFPA procedures governing its codes and standards development process, including information on the procedures for requesting Formal Interpretations, for proposing Tentative Interim Amendments, and for proposing revisions to NFP

28、A standards during regular revision cycles, should be sent to NFPA headquarters, addressed to the attention of the Secretary, Standards Council, NFPA, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101; email: stds_adminnfpa.org For more information about NFPA, visit the NFPA website at www.n

29、fpa.org. All NFPA codes and standards can be viewed at no cost at www.nfpa.org/freeaccess.1221-1 NFPA and National Fire Protection Association are registered trademarks of the National Fire Protection Association, Quincy, Massachusetts 02169. Copyright 2015 National Fire Protection Association . All

30、 Rights Reserved. NFPA 1221 Standard for the Installation, Maintenance, and Use of Emergency Services Communications Systems 2016 Edition This edition of NFPA 1221, Standard for the Installation, Maintenance, and Use of Emergency Services Communications Systems, was prepared by the Technical Committ

31、ee on Public Emergency Service Communication. It was issued by the Standards Council on May 26, 2015, with an effective date of June 15, 2015, and supersedes all previous editions. A Tentative Interim Amendment (TIA) adding new denitions (3.3.6, 3.3.7, 3.3.14, 3.3.62, and 3.3.75), a new Section 8.6,

32、 and corresponding Annex A material was issued on August 18, 2015. For further information on tentative interim amendments, see Section 5 of the Regulations Governing the Development of NFPA Standards, available at http:/www.nfpa.org/regs. This edition of NFPA 1221 was approved as an American Nation

33、al Standard on June 15, 2015. Origin and Development of NFPA 1221 NFPA 1221, Standard for the Installation, Maintenance, and Use of Emergency Services Communications Systems, dates back to 1898. Originally, it was part of a general standard on signaling systems, but the material on municipal re alar

34、m systems was separated from the general standard in 1911. This standard has been revised and reissued in editions dated 1904, 1911, 1926, 1934, 1940, 1941, 1946, 1948, 1949, 1950, 1952, 1954, 1955, 1956, 1962, 1963, 1964, 1967, 1973, 1975, 1978, 1980, 1984, 1988, 1991, 1994, 1999, 2002, and 2007. T

35、he 1999 edition of NFPA 1221 was a result of very hard work by committee members, especially the previous chairman, Evan E. Stauffer, Jr. The goal of the committee was to completely rewrite the standard to reect an emergence of joint communications centers, the increase in technology-based informati

36、on systems that assist users in both the communications center and the eld of operations, and the role communications play in emergency scene operations within the Incident Command System. To reect the fact that NFPA 1221 is applicable to all emergency responders, not just the re service, the title

37、was changed from Standard for the Installation, Maintenance, and Use of Public Fire Service Communication Systems to Standard for the Installation, Maintenance, and Use of Emergency Communication Systems. The 2002 edition of this document continued to enhance the capabilities of personnel assigned t

38、o communications centers as well as the interoperability of systems. Because technology is continually changing, committee members began to assess potential changes to the next edition of this standard. It was recognized that it is incumbent on both users and enforcers of this standard to understand

39、 the impact of the standard, both in the area of service delivery and on the safety of those emergency response personnel delivering services. Competing interests and priorities in a communications center need to be addressed by the authority having jurisdiction to develop standard operating procedu

40、res on how calls for service are processed, dispatched, and tracked. The mission of the communications center should be to serve as a conduit between those requesting services and those providing the services. This standard with its current revisions provides the requirements to accomplish that miss

41、ion. The 2007 edition of NFPA 1221 was a complete revision incorporating the requirements of the Manual of Style for NFPA Technical Committee Documents. As part of the 2007 revision, the committee restructured several chapters and added a new chapter on data network security and several new sections

42、. Subsequently, all chapters were renumbered to accommodate those changes. The entire document was reviewed and editorially updated to clarify requirements and ambiguous language. InINSTALLATION, MAINTENANCE, AND USE OF EMERGENCY SERVICES COMMUNICATIONS SYSTEMS 1221-2 2016 Edition addition, the titl

43、e of the document was again changed, to Standard for the Installation, Maintenance, and Use of Emergency Services Communications Systems. The 2010 edition of NFPA 1221 added requirements to include an emergency re plan to safeguard personnel and minimize disruption of vital public safety communicati

44、ons. New communication centers and the buildings in which they are located were now required to be protected from the approach of unauthorized vehicles or to have the building designed to be blast resistant. The committee also addressed the need for reliable in-building tactical emergency communicat

45、ions by developing performance requirements for two-way radio communication enhancement systems. The 2013 edition of NFPA 1221 added a section on retroactivity that allowed the authority having jurisdiction to require the application of any provision of the document. The committee also addressed an

46、important alarm processing issue in the 2013 edition. NFPA staff had been receiving frequent calls from emergency services about alarm processing times that exceeded the time allotted in the standard. These alarm calls required more time to process because dispatchers and call takers were required t

47、o gather additional information before dispatching the appropriate resources. The committee addressed the issue by including six categories of calls that require additional time to process within the standard. The 2016 edition of NFPA 1221 includes requirements regarding two-way radio communications

48、 enhancement systems and pathway survivability from NFPA 72, National Fire Alarm and Signaling Code, that the committees of both standards felt are more appropriate to NFPA 1221. Additionally, call processing times have been revisited, resulting in a change to the emergency call processing timeline

49、in the alarm processing section to include verication. The change addresses improvements to the technologies whereby telecommunicators receive emergency calls and the time it takes to verify the location of the emergency prior to processing. A requirement that two telecommunicators be on duty in the communications center at all times is another change made to the 2016 edition. Two additional categories of calls requiring additional time to process at the public safety answering point (PSAP) also have been added.COMMITTEE PERSONNEL 1221-3 2016 Edition Technica