NFPA 18-2017 en Standard on Wetting Agents (Effective Date 12 01 2016).pdf

1、 NFPA 18 Standard on Wetting Agents 2017IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS NOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE OF NFPA STANDARDS NFPA codes, standards, recommended practices, and guides (“NFPA Standards”), of which the document contained herein is one, are

2、developed through a consensus standards development process approved by the American National Standards Institute. This process brings together volunteers representing varied viewpoints and interests to achieve consensus on re and other safety issues. While the NFPA administers the process and estab

3、lishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in NFPA Standards. The NFPA disclaims liability for any personal injury, property or other damages of any

4、nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on NFPA Standards. The NFPA also makes no guaranty or warranty as to the accuracy or completeness of any information published herein. In issuing an

5、d making NFPA Standards available, the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own ind

6、ependent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. The NFPA has no power, nor does it undertake, to police or enforce compliance with the contents of NFPA Standards. Nor does the NFPA list, cert

7、ify, test, or inspect products, designs, or installations for compliance with this document. Any certication or other statement of compliance with the requirements of this document shall not be attributable to the NFPA and is solely the responsibility of the certier or maker of the statement. REMIND

8、ER: UPDATING OF NFPA STANDARDS Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that NFPA Standards may be amended from time to time through the issuance of Tentative Interim Amendments or corrected by Errata. An ofcial NFPA Standard at any point i

9、n time consists of the current edition of the document together with any Tentative Interim Amendment and any Errata then in effect. In order to determine whether an NFPA Standard has been amended through the issuance of Tentative Interim Amendments or corrected by Errata, visit the “Codes email: std

10、s_adminnfpa.org. For more information about NFPA, visit the NFPA website at www.nfpa.org. All NFPA codes and standards can be viewed at no cost at www.nfpa.org/docinfo.18-1 NFPA and National Fire Protection Association are registered trademarks of the National Fire Protection Association, Quincy, Ma

11、ssachusetts 02169. Copyright 2016 National Fire Protection Association . All Rights Reserved. NFPA 18 Standard on Wetting Agents 2017 Edition This edition of NFPA 18, Standard on Wetting Agents, was prepared by the Technical Committee on Water Additives for Fire Control and Vapor Mitigation. It was

12、issued by the Standards Council on November 11, 2016, with an effective date of December 1, 2016, and supersedes all previous editions. This edition of NFPA 18 was approved as an American National Standard on December 1, 2016. Origin and Development of NFPA 18 This standard was originally sponsored

13、by the NFPA General Committee on Special Extinguishing Methods and prepared by the NFPA Committee on Wetting Agents. Initiated and tentatively adopted in 1949, it was ofcially adopted in 1951. Extensive revisions, most of which were concerned with the use of wetting agent foam, were adopted in 1955.

14、 Subsequently, in 1959, responsibility for this standard was transferred to the Committee on Foam, and the standard was amended in 1972 and 1979. The 1986 and 1990 editions of the standard were reconrmations of the 1979 edition. The 1995 edition of the document also was a reconrmation. However, some

15、 editorial changes were incorporated in an effort to make the document more user friendly. The 2006 edition underwent extensive revisions, both technical and editorial. Technical changes included clarifying the denition of wetting agents and their use on specic types of res. Specic requirements for

16、wetting agents and the methods for testing were detailed in Chapter 5, and Chapter 6 contained requirements for the supply of wetting agents. Specic packaging requirements were included in Chapter 7, and inspection, testing, and maintenance requirements for systems using wetting agents were detailed

17、 in Chapter 8. Editorial changes included updating the structure of the standard to comply with the Manual of Style for NFPA Technical Committee Documents and strengthening the language into specic requirements. The 2011 edition also underwent extensive technical and editorial revision. Technical ch

18、anges included limits for aquatic toxicity for parity and consistency with other product standards. Editorial changes included updating the structure of the standard to further comply with the Manual of Style for NFPA Technical Committee Documents. The 2017 edition includes both technical and editor

19、ial revisions. Technical changes include clarication that all aspects of the listing for wetting agents must be observed, an explanation on the units of the corrosion rate equation in Chapter 5, and a new section within Chapter 5 was created to provide requirements for alternate viscosity test metho

20、ds for situations where the viscosity is too low to obtain meaningful results. Editorial changes include updating the standard to comply with the Manual of Style for NFPA Technical Committee Documents.WETTING AGENTS 18-2 2017 Edition Technical Committee on Water Additives for Fire Control and Vapor

21、Mitigation Armand V. Brandao, Chair FM Approvals, MA I Michael T. Greiner, Secretary Hazard Control Technologies, Inc., GA M Tracy Browder, XCEL Energy, TX U Rep. Edison Electric Institute Brian R. Foster, AEGIS Insurance Services, Inc., NC I Walter Groden, AIG Global Techical Ofce, NY I Alison C. G

22、ude, Tyco Fire Suppression & Building Products, WI M Gerald J. Halpin III, CET Fire Pumps Manufacturing, Canada M Rep. Fire Apparatus Manufacturers Assoc. Cecilia W. Johnson, USDA Forest Service, MT RT Blake M. Shugarman, UL LLC, IL RT Robert E. Tinsley, Jr., Pyrocool Technologies, Inc., VA M Qingsh

23、eng Wang, Oklahoma State University, OK SE Alternates Robert M. Cordell, FM Approvals, MA I (Alt. to Armand V. Brandao) Michael P. Dupay, Fire Research Corporation, NY M (Alt. to Gerald J. Halpin III) Rep. Fire Apparatus Manufacturers Assoc. Jerauld R. Kirkpatrick, UL LLC, IL RT (Alt. to Blake M. Sh

24、ugarman) Anthony Natale, Consolidated Edison of New York, NY U (Alt. to Tracy Browder) Rep. Edison Electric Institute Jacqueline Wilmot, NFPA Staff Liaison This list represents the membership at the time the Committee was balloted on the nal text of this edition. Since that time, changes in the memb

25、ership may have occurred. A key to classications is found at the back of the document. NOTE: Membership on a committee shall not in and of itself constitute an endorsement of the Association or any document developed by the committee on which the member serves. Committee Scope: This Committee shall

26、have primary responsibility for documents on the manufacture, testing, application, and use of water additives for the control and/or suppression of re and ammable vapor mitigation including water additives used to prevent or reduce the spread of re and the use of water additives in xed, semi-xed, m

27、obile, and portable re suppression systems.CONTENTS 18-3 2017 Edition Contents Chapter 1 Administration 18 4 1.1 Scope. . 18 4 1.2 Purpose. . 18 4 1.3 Application. . 18 4 1.4 Retroactivity. 18 4 1.5 Equivalency. . 18 4 1.6 Units and Formulas. 18 4 Chapter 2 Referenced Publications 18 4 2.1 General.

28、. 18 4 2.2 NFPA Publications. . 18 4 2.3 Other Publications. . 18 4 2.4 References for Extracts in Mandatory Sections. 18 5 Chapter 3 Denitions 18 5 3.1 General. . 18 5 3.2 NFPA Ofcial Denitions. 18 5 3.3 General Denitions. 18 6 Chapter 4 Uses and Limitations 18 6 4.1 General. . 18 6 4.2 Limitations

29、. 18 6 4.3 Compatibility of Wetting Agent Concentrate(s) and Solution(s). . 18 6 4.4 Concentrations. . 18 6 4.5 Health, Safety, and Environmental Considerations. 18 6 Chapter 5 Requirements and Test Methods for Wetting Agent Concentrates and Wetting Agent Solutions 18 7 5.1 General. . 18 7 5.2 Wetti

30、ng Agent Concentrates and Solutions. . 18 7 5.3 Wetting Agent Solutions. 18 10 Chapter 6 Class A Fire Extinguishment Tests . 18 10 6.1 General. . 18 10 6.2 Wood Crib Fire Test. . 18 10 6.3 Deep-Seated Fire Test. . 18 11 6.4 Wood Fiberboard Penetration. . 18 11 Chapter 7 Class B Fire Extinguishment T

31、ests . 18 11 7.1 General. . 18 11 7.2 Listing. . 18 11 7.3 Test Method. 18 11 7.4 Performance Requirement. . 18 11 Chapter 8 Wetting Agent Supply 18 11 8.1 System Requirements. . 18 11 8.2 Fire Department Wetting Agent Supply Requirements. 18 11 8.3 Fixed Systems. . 18 12 Chapter 9 Packaging and Lab

32、eling . 18 12 9.1 Packaging. 18 12 9.2 Storage. 18 12 9.3 Labeling. 18 12 Chapter 10 Inspection, Testing, and Maintenance of Fixed Systems . 18 12 10.1 Fixed Extinguishing Systems. . 18 12 10.2 Inspection of Wetting Agent Concentrate. 18 12 Annex A Explanatory Material 18 12 Annex B Informational References . 18 14 Index . 18 15