1、NFPA1925 Standard on Marine Fire-Fighting Vessels 2013 Edition NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471 An International Codes and Standards Organization IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPADOCUMENTSNOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE OF NFPA DOCUMENTSNFPAcodes
2、, standards, recommended practices, and guides (“NFPA Documents”), of which the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This process brings together volunteers representing varied viewpoi
3、nts and interests to achieve consensus on fire and other safety issues. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgme
4、nts contained in NFPA Documents. The NFPA disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on NFPA Documents. The NFPA
5、also makes no guaranty or warranty as to the accuracy or completeness of any information published herein. In issuing and making NFPA Documents available, the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is the NFPA undertaking to per
6、form any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. The NFPA has no power,
7、nor does it undertake, to police or enforce compliance with the contents of NFPA Documents. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certification or other statement of compliance with the requirements of this docume
8、nt shall not be attributable to the NFPA and is solely the responsibility of the certifier or maker of the statement. 12 /12ISBN: 978-145590605-5 (Print)ISBN: 978-145590651-2 (PDF)REMINDER: UPDATING OF NFPA DOCUMENTSUsers of NFPA codes, standards, recommended practices, and guides (“NFPA Documents”)
9、 should be aware that NFPA Documents may be amended from time to time through the issuance of Tentative Interim Amendments or corrected by Errata. An official NFPA Document at any point in time consists of the current edition of the document together with any Tentative Interim Amendment and any Erra
10、ta then in effect.In order to determine whether an NFPA Document has been amended through the issuance of Tentative Interim Amendments or corrected by Errata, visit the Document Information Pages on NFPAs website. The Document Information Pages provide up-to-date, document specific information inclu
11、ding any issued Tentative Interim Amendments and Errata.To access the Document Information Page for a specific NFPA Document go to http:/www.nfpa.org/document for a list of NFPA Documents, and click on the appropriate Document number (e.g., NFPA 101). In addition to posting all existing Tentative In
12、terim Amendments and Errata, the Document Information Page also includes the option to sign-up for an “Alert” feature to receive an email notification when new updates and other information are posted regarding the document. IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPADOCUMENTSADDITIONAL NOTICE
13、S AND DISCLAIMERSUpdating of NFPA Documents Users of NFPA codes, standards, recommended practices, and guides (“NFPA Documents”) should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of Tentative In
14、terim Amendments. An official NFPA Document at any point in time consists of the current edition of the document together with any Tentative Interim Amendments and any Errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through
15、 the issuance of Tentative Interim Amendments or corrected through the issuance of Errata, consult appropriate NFPA publications such as the National Fire CodesSubscription Service, visit the NFPA website at www.nfpa.org, or contact the NFPA at the address listed below.Interpretations of NFPA Docume
16、nts A statement, written or oral, that is not processed in accordance with Section 6 of the Regulations Governing Committee Projects shall not be considered the official position of NFPA or any of its Committees and shall not be considered to be, nor be relied upon as, a Formal Interpretation.Patent
17、s The NFPA does not take any position with respect to the validity of any patent rights referenced in, related to, or asserted in connection with an NFPA Document. The users of NFPA Documents bear the sole responsibility for determining the validity of any such patent rights, as well as the risk of
18、infringement of such rights, and the NFPA disclaims liability for the infringement of any patent resulting from the use of or reliance on NFPA Documents.NFPA adheres to the policy of the American National Standards Institute (ANSI) regarding the inclusion of patents in American National Standards (“
19、the ANSI Patent Policy”), and hereby gives the following notice pursuant to that policy:NOTICE: The users attention is called to the possibility that compliance with an NFPA Document may require use of an invention covered by patent rights. NFPA takes no position as to the validity of any such paten
20、t rights or as to whether such patent rights constitute or include essential patent claims under the ANSI Patent Policy. If, in connection with the ANSI Patent Policy, a patent holder has filed a statement of willingness to grant licenses under these rights on reasonable and nondiscriminatory terms
21、and conditions to applicants desiring to obtain such a license, copies of such filed statements can be obtained, on request, from NFPA. For further information, contact the NFPA at the address listed below.Law and Regulations Users of NFPA Documents should consult applicable federal, state, and loca
22、l laws and regulations. NFPA does not, by the publication of its codes, standards, recommended practices, and guides, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so.Copyrights NFPA Documents are copyrighted. They are made av
23、ailable for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of safe practices and methods. By making these documents available for use and adoption by public authorit
24、ies and private users, the NFPA does not waive any rights in copyright to these documents. Use of NFPA Documents for regulatory purposes should be accomplished through adoption by reference. The term “adoption by reference” means the citing of title, edition, and publishing information only. Any del
25、etions, additions, and changes desired by the adopting authority should be noted separately in the adopting instrument. In order to assist NFPA in following the uses made of its documents, adopting authorities are requested to notify the NFPA (Attention: Secretary, Standards Council) in writing of s
26、uch use. For technical assistance and questions concerning adoption of NFPA Documents, contact NFPA at the address below.For Further Information All questions or other communications relating to NFPA Documents and all requests for information on NFPA procedures governing its codes and standards deve
27、lopment process, including information on the procedures for requesting Formal Interpretations, for proposing Tentative Interim Amendments, and for proposing revisions to NFPA documents during regular revision cycles, should be sent to NFPA headquarters, addressed to the attention of the Secretary,
28、Standards Council, NFPA, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101; email: stds_adminnfpa.orgFor more information about NFPA, visit the NFPA website at www.nfpa.org.12/11Copyright 2013 National Fire Protection Association. All Rights Reserved.NFPA1925Standard onMarine Fire-Fighting V
29、essels2013 EditionThis edition of NFPA 1925, Standard on Marine Fire-Fighting Vessels, was prepared by theTechnical Committee on Marine Fire Fighting Vessels. It was issued by the Standards Councilon November 27, 2012, with an effective date of December 17, 2012, and supersedes allprevious editions.
30、This edition of NFPA 1925 was approved as an American National Standard on December17, 2012.Origin and Development of NFPA 1925This standard resulted from a request by the NFPA Fire Service Training Committee stat-ing that there was a need for a document addressing construction, testing, and operati
31、on ofmarine fire-fighting vessels. The Technical Committee on Marine Fire Fighting Vessels wasappointed and began work on developing this document in 1991. The committee met manytimes during the 1990s to draft the first edition of the standard, which was issued by NFPA inthe summer of 1998.The 2004
32、edition of NFPA 1925 was a complete revision of the document to comply withthe NFPA Manual of Style. Many of the changes in the document are editorial in nature andinclude updating definitions for consistency with the NFPA Glossary of Terms. In addition, theCommittee eliminated waterline length as a
33、 consideration of the designation of class of fire-fighting vessel to focus on vessel functionality; operational requirements were streamlined toeliminate those provisions not essential as design considerations by marine fire-fighting vesseldesigners; and some existing requirements were reworded to
34、state equipment usage in per-formance language so the requirement would be applicable to the activity being conductedby the designated class of marine fire-fighting vessel.For the 2008 edition, the committee completely revised the standard to redesignate themarine fire-fighting vessel classification
35、s and capabilities from three to five categories to beconsistent with the NIMS DHS Table for Emergency Support Function (ESF) #4, shown inChapter 5. With this change, the standard included vessels that had been designated as beingequipped with fire-fighting capabilities according to the NIMS DHS Tab
36、le for ESF #4. Thiseffort provided a consistent methodology for defining the capabilities for marine fire-fightingvessels that support resource sharing in mutual aid applications.Also for the 2008 edition, the committee reorganized and updated the information in thedocument to make it consistent wit
37、h current industry design and specification practices. Thecommittee updated the equipment specification listings for each class of marine fire-fightingvessel.For the 2013 edition, the committee has completely reorganized Chapter 6, Fire-FightingSystem Capabilities, to remove redundant requirements a
38、nd assist the user with applying thestandard. In addition to updating the definition of fire-fighting vessel, the committee alsoadded new definitions for CategoryAmachinery space and net positive suction head. Extinguishingsystems, optical warning devices, installation of navigation equipment, and t
39、esting of commu-nication and signaling equipment are some of the other requirements that have been up-dated in this edition of the standard.DedicationThe Marine Fire Fighting Vessels Committee dedicated the 2004 edition of the standard tothe late Timothy Stillman, who was a member of the Committee f
40、rom its start-up in January1991 until his death in 2001.19251NFPA and National Fire Protection Association are registered trademarks of the National Fire Protection Association, Quincy, Massachusetts 02169.Technical Committee on Marine Fire Fighting VesselsJeffery P. McBride, ChairEBL Engineers, LLC
41、, MD SEV. Frank Bateman, UTC/Kidde Fire Fighting, CA MBob D. Beck, Zodiac of North America, Inc., MD MAnthony R. Carli, Everett Fire Department, MA URichard E. Chester, Jr., Seattle Fire Department, WA UPatrick J. Conroy, Aon Fire Protection Engineering, WA IPeter J. Duclos, Gladding-Hearn, Duclos C
42、orporation,MA MPaul V. Fleury, Marine Services, VA IMStephen A. Fredlund, Tampa Fire Rescue Department,FL UGary Handwerk, Hale Products Inc., FL MMuhammad S. Mahtab, Latitude Marine Consultants,Canada SEJohn J. McDevitt, Drexel Hill, PA CBill McDonough, The Wexford Group International,PA SERobert M.
43、 Neelon, SeaArk Marine, Inc., SC MDerek J. Noon, Robert Allan Ltd., Canada SEJonathan G. Parrott, Jensen Maritime Consultants, Inc.,WA SEWilliam B. Robbins, New England Marine Survey, LLC,CT SEDonald H. Seaman, CSC Advanced Marine, DC SENathan Stabile, John Deere Power Systems, IA MDonald H. J. Turn
44、o, Savannah River Nuclear Solutions,LLC, SC UTimothy VonSeggern, Portland Fire ABYC Standards and Technical Information Reports forSmall Craft; ABS Rules for Building and Classing Steel Vessels Under90 Meters (295 ft) in Length; 46 CFR 2428, Subchapter C, “Un-inspected Vessels,” or 46 CFR 175187, Su
45、bchapter T, “SmallPassenger Vessels (Under 100 Gross Tons),” as appropriate.4.5.2 Instructions for operation of vessel safety equipmentshall be the equipment manufacturers instructions and shallbe adequately posted.4.5.3 Escape plans, operating instructions, diagrams, safetychecklists, and other per
46、tinent data shall be available to thoseonboard.Chapter 5 Classifications5.1* Classifications. Marine fire-fighting vessels shall be classi-fied and equipped in accordance with Table 5.1 for classifica-tion of emergency response vessel resources.5.2 Requirements for Vessel Classification.5.2.1 Marine
47、 fire-fighting vessels designated as Type I shallmeet the following minimum requirements:(1) Minimum number of pumps: 2(2) Minimum water pumping capacity: 20,000 gpm (80,000 L/min) 150 psi (10 bar)(3) Foam production in accordance with Chapter 9 of NFPA 11,Standard for Low-, Medium-, and High-Expans
48、ion Foam(4) Minimum number of generators: 2(5) On-station fuel capacity: 48 hours(6) Minimum number of monitors: 4(7) Minimum number of discharge outlets: 24; 6 112 in.(38 mm); 10 212 in. (65 mm) or larger; 4 312 in.(89 mm); 4 5 in. (127 mm)5.2.2 Marine fire-fighting vessels designated as Type II sh
49、allmeet the following minimum requirements:(1) Minimum number of pumps: 2(2) Minimum pumping capacity: 10,000 gpm (40,000 L/min) 150 psi (10 bar)(3) Foam production in accordance with Chapter 9 of NFPA 11,Standard for Low-, Medium-, and High-Expansion Foam(4) Minimum number of generators: 2(5) On-station fuel capacity: 24 hours(6) Minimum number of monitors: 4(7) Minimum number of discharge outlets: 8; 3 312 in.(89 mm); 5 5 in. (127 mm)Table 5.1 Minimum Capabilities of Vessel ClassificationComponent Type I Type II Ty
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1