NFPA 1983 ERTA 1-2017 Standard on Life Safety Rope and Equipment for Emergency Services.pdf

1、 Errata NFPA 1983 Standard on Life Safety Rope and Equipment for Emergency Services 2017 Edition Reference: Various Errata No: 1983-17-1 The Technical Committee on Special operations Protective Clothing and Equipment, and the Correlating Committee on Fire and Emergency Services Protective Clothing a

2、nd Equipment note the following errors in the 2017 edition of NFPA 1983, Standard on Life Safety Rope and Equipment for Emergency Services. 1. Correct cross reference in section 5.19.1.2.4 to read as follows: 5.19.1.2.4 Each portable anchor shall display a “G” for general-use items or a “T” for tech

3、nical-use items. The designation “G” or “T” shall be designated in accordance with 6.19.1.2. 2. Correct cross reference in section 5.23.1.2 to read as follows: 5.23.1.2 Each escape system load-bearing hardware item shall have a product label stamped, engraved, or otherwise permanently marked with th

4、e portions of the product label information specified in 5.23.1.2.1 through and 5.23.1.2.25. 3. Referenced sections do not exist, delete section 5.23.1.10 in its entirety as follows: 5.23.1.10 In addition to the compliance statement specified in 5.23.1.9, at least the information required in 5.23.1.

5、2.3 through 5.23.1.2.5 shall also be provided on the printed product label. 4. Referenced sections do not exist, delete section 5.24.1.10 in its entirety as follows: 5.24.1.10 In addition to the compliance statement specified in 5.24.1.9, at least the information required in 5.24.1.2.3 through 5.24.

6、1.2.5 shall also be provided on the printed product label. 5. Correct cross reference in section 5.25.1.3 to read as follows: 5.25.1.3 The product label for the portions of the product label information not specified in 5.25.1.2.1 through 5.25.1.2.5 shall be permitted to be a hang tag affixed to eac

7、h manufacturer system or shall be permitted to be printed on a sheet that is inserted and sealed in the packaging that immediately contains the manufactured system. 6. Correct cross reference in section 5.25.1.10 to read as follows: 5.25.1.10 In addition to the compliance statement specified in 5.25

8、.1.9, at least the information required in 5.25.1.2.1 through 5.25.1.2.5 shall also be provided on the printed product label. Issue Date: March 13, 2017 (Note: Electronic products and pamphlet reprints may have this errata incorporated. For current information about the NFPA Codes and Standards, including this errata, please see www.nfpa.org/docinfo) Copyright 2017 All Rights Reserved NATIONAL FIRE PROTECTION ASSOCIATION