1、NFPA422 Guide for Aircraft Accident/Incident Response Assessment 2010 Edition NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471 An International Codes and Standards Organization NOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE OF NFPA DOCUMENTS NFPAcodes, standards, recommended practices, and gu
2、ides (“NFPA Documents”), of which the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This process brings together volunteers representing varied viewpoints and interests to achieve consensus on
3、fire and other safety issues. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in NFPA Documents. The NFPA
4、disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on NFPA Documents. The NFPA also makes no guaranty or warranty as to t
5、he accuracy or completeness of any information published herein. In issuing and making NFPA Documents available, the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by any person or entity
6、 to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. The NFPA has no power, nor does it undertake, to police or enforc
7、e compliance with the contents of NFPA Documents. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certification or other statement of compliance with the requirements of this document shall not be attributable to the NFPA a
8、nd is solely the responsibility of the certifier or maker of the statement. ISBN: 978-087765932-7 (Print) ISBN: 978-087765980-8 (PDF) 12/09IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA DOCUMENTS IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA DOCUMENTS ADDITIONAL NOTICES AND DISCLAIMERS Updati
9、ng of NFPA Documents Users of NFPA codes, standards, recommended practices, and guides (“NFPA Documents”) should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of Tentative Interim Amendments. An of
10、ficial NFPA Document at any point in time consists of the current edition of the document together with any Tentative Interim Amendments and any Errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of Tentat
11、ive Interim Amendments or corrected through the issuance of Errata, consult appropriate NFPA publications such as the National Fire Codes Subscription Service, visit the NFPA website at www.nfpa.org, or contact the NFPA at the address listed below. Interpretations of NFPA Documents A statement, writ
12、ten or oral, that is not processed in accordance with Section 6 of the Regulations Governing Committee Projects shall not be considered the official position of NFPA or any of its Committees and shall not be considered to be, nor be relied upon as, a Formal Interpretation. Patents The NFPA does not
13、take any position with respect to the validity of any patent rights referenced in, related to, or asserted in connection with an NFPA Document. The users of NFPA Documents bear the sole responsibility for determining the validity of any such patent rights, as well as the risk of infringement of such
14、 rights, and the NFPA disclaims liability for the infringement of any patent resulting from the use of or reliance on NFPA Documents. NFPA adheres to the policy of the American National Standards Institute (ANSI) regarding the inclusion of patents in American National Standards (“the ANSI Patent Pol
15、icy”), and hereby gives the following notice pursuant to that policy: NOTICE: The users attention is called to the possibility that compliance with an NFPA Document may require use of an invention covered by patent rights. NFPA takes no position as to the validity of any such patent rights or as to
16、whether such patent rights constitute or include essential patent claims under the ANSI Patent Policy. If, in connection with the ANSI Patent Policy, a patent holder has filed a statement of willingness to grant licenses under these rights on reasonable and nondiscriminatory terms and conditions to
17、applicants desiring to obtain such a license, copies of such filed statements can be obtained, on request, from NFPA. For further information, contact the NFPA at the address listed below. Law and Regulations Users of NFPA Documents should consult applicable federal, state, and local laws and regula
18、tions. NFPA does not, by the publication of its codes, standards, recommended practices, and guides, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights NFPA Documents are copyrighted by the NFPA. They are made availa
19、ble for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of safe practices and methods. By making these documents available for use and adoption by public authorities
20、and private users, the NFPA does not waive any rights in copyright to these documents. Use of NFPA Documents for regulatory purposes should be accomplished through adoption by reference. The term “adoption by reference” means the citing of title, edition, and publishing information only. Any deletio
21、ns, additions, and changes desired by the adopting authority should be noted separately in the adopting instrument. In order to assist NFPA in following the uses made of its documents, adopting authorities are requested to notify the NFPA (Attention: Secretary, Standards Council) in writing of such
22、use. For technical assistance and questions concerning adoption of NFPA Documents, contact NFPA at the address below. For Further Information All questions or other communications relating to NFPA Documents and all requests for information on NFPA procedures governing its codes and standards develop
23、ment process, including information on the procedures for requesting Formal Interpretations, for proposing Tentative Interim Amendments, and for proposing revisions to NFPA documents during regular revision cycles, should be sent to NFPA headquarters, addressed to the attention of the Secretary, Sta
24、ndards Council, NFPA, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02169-7471; email: stds_adminnfpa.org For more information about NFPA, visit the NFPA website at www.nfpa.org. 12/09Copyright 2009 National Fire ProtectionAssociation.All Rights Reserved.NFPA422Guide forAircraft Accident/Incident R
25、esponse Assessment2010 EditionThis edition of NFPA 422, Guide for Aircraft Accident/Incident Response Assessment, was pre-pared by the Technical Committee onAircraft Rescue and Fire Fighting. It was issued by theStandards Council on October 27, 2009, with an effective date of December 5, 2009, andsu
26、persedes all previous editions.This edition of NFPA422 was approved as anAmerican National Standard on December 5,2009.Origin and Development of NFPA 422Originally a manual, NFPA 422 was initially begun in 1963 and was submitted to the Asso-ciation for adoption at the 1972 Annual Meeting. The docume
27、nt was revised in 1979 and1984, and the 1989 edition was a reconfirmation of the 1984 edition.The title for the 1994 edition was changed from Manual for Aircraft Fire and ExplosionInvestigators to Guide for Aircraft Accident Response. The document was completely revised toprovide a framework for the
28、 accumulation of data relative to the effectiveness of aircraftaccident/incident emergency response services in the application of principles found in thestandards and guides developed by the Technical Committee on Aircraft Rescue and FireFighting.Thisdocumentisintendedtoassistthecommitteeincollecti
29、ngsignificantdatathatcanbeutilized to facilitate revisions to the NFPAaircraft rescue and fire-fighting documents.The 1999 edition was a reconfirmation of the 1994 edition. Editorial changes were madeto make the forms easier to use.For the 2004 edition, the document was revised to include only one,
30、simpler form that canbe used for all accidents/incidents. Several chapters were added with information for theinvestigator.In the 2010 edition of NFPA 422, the Aircraft Accident/Incident Report Form has beenreformatted as a checklist, making it easier to fill out. The committee wanted to keep therep
31、ort form as thorough as possible while still being simple and up-to-date. The committee ishoping that the redesigned form will increase the likelihood that it will be used and submit-ted, thus ensuring proper data collection and processing. The explanatory sections that ac-company the form have been
32、 rewritten to reflect the forms revisions. In addition, the com-mittee has made sure that the document follows the Manual of Style for NFPA TechnicalCommittee Documents by making the appropriate corrections and updates.4221NFPAand National Fire ProtectionAssociation are registered trademarks of the
33、National Fire ProtectionAssociation, Quincy, Massachusetts 02169.Technical Committee on Aircraft Rescue and Fire FightingRobert G. Lindstrom, ChairPro-Tec Fire Services Ltd., OK URep. InternationalAssociation of Fire ChiefsDonald R. Austin, LosAngeles City Fire Department,CAUKeith W. Bagot, U.S. Fed
34、eralAviationAdministration, NJRTCharles Cinquemani, Dallas/Fort Worth International Airport Board, TX CRep.Airports Council International NorthAmericaRalph Colet, JRI Inc., CAMRobert L. Darwin, HughesAssociates, Inc., MD SERoss A. Davidson, U.S. Department of the Navy, CACJohn Demyan, Lehigh-Northam
35、ptonAirportAuthority,PALRep. InternationalAssociation of Fire FightersFred B. Goodnight, Amerex Corporation,AL MRep. Fire Equipment ManufacturersAssociationDavid D. Harris, Lockheed MartinAeronautics Company,GAUOwen Healey, United Kingdom CivilAviationAuthority,United Kingdom EDonald E. Hilderbrand,
36、 Phoenix Fire Department,AZ ULawrence M. Krasner, FM Global, MAIMadhu Manikkam, Emergency One, Inc., FL MPaul S. Meyer, Hartsfield-JacksonAtlanta InternationalAirport, GACGary I. Moorshead, BAALtd., United Kingdom CGatan Morinville, National Defence Department,Canada CKevin J. Petit, Akron Brass Com
37、pany, OH MPam L. Phillips, PortAuthority of New York how-ever, that is more apt to occur with parts of large mass.6.2.1.5 In many accidents/incidents in which in-flight fire ex-isted, metal spatter deposits are found on areas removed fromthefiresourcearea.Thesedepositscanbeanalyzedtodeterminethecont
38、entandpossiblywherethefireoriginatedontheaircraft.The slipstreams from in-flight airflows or even compartmentalairflows are strong enough to carry large masses of molten metalquite a distance and force them onto cold objects.Another indi-cation of in-flight fire is the so-called aluminum “broomstraw
39、” or“feathering” effect, common in in-flight fire investigations. Basi-cally, when aluminum in a near-molten state is shock-loaded,such as in a crash impact, the material exhibits an extremelydelaminated appearance resembling broomstraws or havingfeathered edges. This phenomenon occurs only under th
40、ese cir-cumstances and is thus positive evidence of an existing fire priorto impact or in-flight explosion.6.2.1.6* Flame temperatures reached by fuel, oil, and hydrau-lic fluids in ambient air are normally in the range of 871C to1093C (1600F to 2000F) due to the forced draft effect ofairflow. Many
41、internal areas of aircraft have “chimney” effectsin flight.6.2.1.7 The sources of fire frequently are localized at the pointof greatest damage or at a point that indicates the greatestamount of heat.Abroken or leaking fluid line resulting in firecanbelocatedbycarefulinspectionofthedamage.Analysisofs
42、amples of ash or soot can indicate the source of fire. Suchsamplesshouldbeobtainedbeforetheyaredissipatedbywindor rain.6.2.1.8 Soot patterns are formed as a result of soot driftingwith the air stream until it strikes an object to which it canattach itself by means of the unburned oils it contains an
43、d byelectrostatic attraction. One point to remember is that sootdoes not attach itself to surfaces that are heated over about371C (700F). Therefore, areas that show the greatest inten-sity of fire might contain little or no soot.6.2.1.9 Reconstructing the aircraft from the remaining partsmight be ne
44、cessary in order to detect a pattern. If, after recon-struction of the aircraft, a pattern in the direction of the in-flight airflow is detectable, an in-flight fire is indicated. Con-versely, if there is no continuity of pattern across lines of failure,the patterns were formed after the aircraft di
45、sintegrated. Theshapesofthepatternsareaffectedbyobjectsthatshroudorblockanotherpart.Theshroudedpartshowsthegeneraloutlineoftheobject doing the shrouding. If a part is found with such an out-line but the part that did the shrouding is not there, the patternmusthaveoccurredbeforedisintegration.Convers
46、ely,ifboththeoutline and the shrouding part are found in relation but theshrouding part is not normally in this position on the airplane,the pattern was formed after disintegration.6.2.2* Heat Intensity Investigations. Heat intensity is anothermeans by which the crash/fire sequence can be determined
47、.This method is becoming more prevalent as more higherheatresistant materials are used in modern aircraft. Theflame temperatures of post-crash fires in which combustibleslike gasoline, JP-4, lubricating oil, and hydraulic fluids are be-ing consumed in still air are normally in the range of 871C to10
48、93C (1600F to 2000F). The flame temperatures of in-flight fires are usually in excess of 1649C (3000F) due to theforced draft of the slipstream and/or compartment coolingairflow. The probable effect of the forced draft is to cause thefuelair ratio to be more nearly stoichiometric. Therefore,when any
49、 parts that have a melting point in excess of 1093C(2000F), like stainless steel and titanium, show evidence ofmelting, the indication is that the fire occurred either in flightor in an oxygen-rich atmosphere. The indication is stronger ifthe part is found in an area in which investigation shows thatthe ground fire was not intense. The finding is not conclusivebecause a ground fire can exceed 1093C (2000F) due tostrong ground winds, or peculiar piling of the wreck
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1