NFPA 501-2017 Standard on Manufactured Housing (Effective Date 12 1 2016).pdf

1、 NFPA 501 2017 Standard on Manufactured HousingISBN: 978-145591582-8 (Print) ISBN: 978-145591583-5 (PDF) IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS NOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE OF NFPA STANDARDS NFPA codes, standards, recommended practices, and guides (“NFPA

2、 Standards”), of which the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This process brings together volunteers representing varied viewpoints and interests to achieve consensus on fire and ot

3、her safety issues. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in NFPA Standards. The NFPA disclaims l

4、iability for any personal injury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on NFPA Standards. The NFPA also makes no guaranty or warranty as to the accuracy

5、 or completeness of any information published herein. In issuing and making NFPA Standards available, the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by any person or entity to someone

6、 else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. The NFPA has no power, nor does it undertake, to police or enforce complianc

7、e with the contents of NFPA Standards. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certification or other statement of compliance with the requirements of this document shall not be attributable to the NFPA and is solel

8、y the responsibility of the certifier or maker of the statement. ALERT: THIS STANDARD HAS BEEN MODIFIED BY A TIA OR ERRATA Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that NFPA Standards may be amended from time to time through the issuance of

9、 Tentative Interim Amendments or corrected by Errata. An official NFPA Standard at any point in time consists of the current edition of the document together with any Tentative Interim Amendment and any Errata then in effect. In order to determine whether an NFPA Standard has been amended through th

10、e issuance of Tentative Interim Amendments or corrected by Errata, visit the “Codes email: stds_adminnfpa.org. For more information about NFPA, visit the NFPA website at www.nfpa.org. All NFPA codes and standards can be viewed at no cost at www.nfpa.org/docinfo.501-1 NFPA and National Fire Protectio

11、n Association are registered trademarks of the National Fire Protection Association, Quincy, Massachusetts 02169. Copyright 2016 National Fire Protection Association . All Rights Reserved. NFPA 501 Standard on Manufactured Housing 2017 Edition This edition of NFPA 501, Standard on Manufactured Housi

12、ng, was prepared by the Technical Committee on Manufactured Housing. It was issued by the Standards Council on November 11, 2016, with an effective date of December 1, 2016, and supersedes all previous editions. This document has been amended by one or more Tentative Interim Amendments (TIAs) and/or

13、 Errata. See “Codes NFPA 5000, Building Construction and Safety Code; and the ICC International Residential Code. Finally, a series of changes to several energy efciency provisions were included. Revisions to the U 0values coupled with changes to the design climate map and certain glazing provisions

14、 moved the manufactured housing energy efciency targets closer to those recommended by the U.S. Department of Energy. The 2013 edition incorporated new requirements for safe rooms and updated referenced documents. The 2017 edition includes the following changes: (1) A requirement for total smoke rel

15、eased has been added as an optional measurement where smoke limitations are desired. (2) Because it has now been shown that cellulose loose-ll insulation cannot be tested appropriately using ASTM E84 (or UL 723), that test has been replaced by CAN/ULC S102.2. (3) The requirements in 5.8.2.3.1 and 5.

16、8.2.3.2 have been removed because they are already included in NFPA 275. (4) NFPA 750 was removed as a reference because it is not an approved automatic sprinkler system and has not been proved to be equivalent to any of the NFPA 13 systems. (5) References and extracts have been appropriately update

17、d.COMMITTEE PERSONNEL 501-3 2017 Edition Technical Committee on Manufactured Housing John Lake, Chair City of Gainesville, FL E Fred Benn, Advanced Automatic Sprinkler, Inc., CA M Rep. National Fire Sprinkler Association David G. Bueche, Hoover Treated Wood Products, CO M Stanley C. Harbuck, School

18、of Building Inspection, UT C Rep. American Public Health Association Thomas L. Harman, University of Houston-Clear Lake, TX SE Christopher P. Jones, Christopher P. Jones & Associates, NC E Rep. FEMA/Mitigation Division John V. Loscheider, Loscheider Engineering Company, WA U Rep. Building Seismic Sa

19、fety Council/Code Resource Support Committee Michael Lubliner, Washington State University, WA U Rep. Northwest Energy Efciency Alliance Ty J. Maltbie, Viega LLC, KS M Robert Parks, Healthy Homes of Louisiana, LA SE Bruce J. Swiecicki, National Propane Gas Association, IL IM Larry J. Tanner, Texas T

20、ech University, TX RT Randy E. Vogt, Minnesota Department of Labor & Industry, MN E Alternates David C. Delaquila, Aquila Consulting LLC, OH IM (Alt. to Bruce J. Swiecicki) Dean C. Hunter, Minnesota Department of Labor & Industry, MN E (Voting Alt.) Joshua Jones, Fire Protection Industries (The Mora

21、n Group), PA M (Alt. to Fred Benn) David K. Low, DK Low & Associates, LLC, VA E (Alt. to Christopher P. Jones) Jake Pauls, Jake Pauls Consulting Services, Canada C (Alt. to Stanley C. Harbuck) Nonvoting Richard A. Mendlen, U.S. Department of Housing & Urban Development, DC E Allan Fraser, NFPA Staff

22、 Liaison This list represents the membership at the time the Committee was balloted on the nal text of this edition. Since that time, changes in the membership may have occurred. A key to classications is found at the back of the document. NOTE: Membership on a committee shall not in and of itself c

23、onstitute an endorsement of the Association or any document developed by the committee on which the member serves. Committee Scope: This Committee shall have primary responsibility for documents on manufactured homes including the installation, sites and communities, and the maintenance of and improvements for existing manufactured homes.