NFPA 51-2018 Standard for the Design and Installation of Oxygen CFuel Gas Systems for Welding Cutting and Allied Processes (Effective Date 08 11 2016).pdf

1、 NFPA 51 Standard for the Design and Installation of OxygenFuel Gas Systems for Welding, Cutting, and Allied Processes 2018IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS NOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE OF NFPA STANDARDS NFPA codes, standards, recommended practices,

2、 and guides (“NFPA Standards”), of which the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This process brings together volunteers representing varied viewpoints and interests to achieve consen

3、sus on re and other safety issues. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in NFPA Standards. The

4、NFPA disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on NFPA Standards. The NFPA also makes no guaranty or warranty as

5、 to the accuracy or completeness of any information published herein. In issuing and making NFPA Standards available, the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by any person or e

6、ntity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. The NFPA has no power, nor does it undertake, to police or e

7、nforce compliance with the contents of NFPA Standards. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certication or other statement of compliance with the requirements of this document shall not be attributable to the NFP

8、A and is solely the responsibility of the certier or maker of the statement. REMINDER: UPDATING OF NFPA STANDARDS Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that NFPA Standards may be amended from time to time through the issuance of Tentativ

9、e Interim Amendments or corrected by Errata. An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any Tentative Interim Amendment and any Errata then in effect. In order to determine whether an NFPA Standard has been amended through the issuance

10、of Tentative Interim Amendments or corrected by Errata, visit the “Codes email: stds_adminnfpa.org. For more information about NFPA, visit the NFPA website at www.nfpa.org. All NFPA codes and standards can be viewed at no cost at www.nfpa.org/docinfo.51-1 NFPA and National Fire Protection Associatio

11、n are registered trademarks of the National Fire Protection Association, Quincy, Massachusetts 02169. Copyright 2016 National Fire Protection Association . All Rights Reserved. NFPA 51 Standard for the Design and Installation of OxygenFuel Gas Systems for Welding, Cutting, and Allied Processes 2018

12、Edition This edition of NFPA 51, Standard for the Design and Installation of OxygenFuel Gas Systems for Welding, Cutting, and Allied Processes, was prepared by the Technical Committee on Industrial and Medical Gases. It was issued by the Standards Council on July 22, 2016, with an effective date of

13、August 11, 2016, and supersedes all previous editions. This edition of NFPA 51 was approved as an American National Standard on August 11, 2016, 2016. Origin and Development of NFPA 51 NFPA standards for the construction, installation, and use of acetylene gas machines and for the storage of calcium

14、 carbide date from 1900. The rst edition of NFPA 51 was adopted in 1925. Subsequent editions of NFPA 51 were dated 1927, 1936, 1942, 1944, 1946, 1951, 1953, 1957, 1958, 1960, 1961, 1964, 1969, 1973, 1974, 1977, 1983, 1987, and 1992. In June 1966, responsibility for NFPA 51 was reassigned from the Co

15、mmittee on Gases and its Sectional Committee on Industrial Gases to the Committee on Industrial and Medical Gases. The 1997 edition was revised editorially to make the standard easier to use, understand, and enforce. The 2002 edition of NFPA 51 contained relatively few changes. The most signicant ch

16、anges were clarication of the size of small systems to which the standard would not apply and the requirements for leak testing piping systems. In addition, the document was revised to conform to the 2002 edition of Manual of Style for NFPA Technical Committee Documents, including reordering of the

17、chapters and adoption of SI units as primary units. The changes to the 2007 edition of NFPA 51 were as follows: (1) Use of standard NFPA text for retroactivity and equivalency (2) Changes in Chapters 4 through 9 to be consistent with the 2005 edition of NFPA 55, Standard for the Storage, Use, and Ha

18、ndling of Compressed Gases and Cryogenic Fluids in Portable and Stationary Containers, Cylinders, and Tanks, particularly the storage amounts (3) Adoption of denitions of fuel gas, limited combustible, and noncombustible material that are consistent with the subject matter of the document (4) Elimin

19、ation of several terms that could not be enforced The 2013 edition was reorganized to coordinate maximum allowable quantities (MAQs) and building controls as used in NFPA 55, Compressed Gases and Cryogenic Fluids Code; NFPA 1, Fire Code; NFPA 5000 , Building Construction and Safety Code ; and NFPA 4

20、00, Hazardous Materials Code; with updates to Chapter 4 and the denitions in Chapter 3. Allowable pressures and other requirements for oxygen manifolds were updated and claried. New protocols for mobile acetylene trailer systems (MATS) were added to coordinate with NFPA 51A, Standard for Acetylene C

21、ylinder Charging Plants. The 2018 edition primarily updates information extracted from and references to NFPA 55, ensuring consistency between the two documents.DESIGN AND INSTALLATION OF OXYGENFUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES 51-2 2018 Edition Technical Committee on Indus

22、trial and Medical Gases Rob Early, Chair Praxair, NY M John J. Anicello, Airgas Inc., WA M William H. Barlen, Barlen and Associates, Inc., NJ SE Rodney L. Barnes, U.S. Department of Energy, TN U Denise Beach, FM Global, MA I Erik W. Christiansen, Exponent, Inc., CA SE Michael Ciotti, Linde North Ame

23、rica, NJ M Julie V. Cordero, Sandia National Laboratories, NM U David J. De Fina, Sterigenics International, Inc., IL IM Kenneth Fegley, Air Products and Chemicals, Inc., PA IM Alejandro Gonzalez, Kryogenifex, FL M Martin T. Gresho, FP2 Fire, Inc., CO SE Gerald T. Hayes, Air Liquide America, AZ IM R

24、ep. Compressed Gas Association Anthony J. Lachawiec, Jr., Intel Corporation, OR M Frank A. Licari, U.S. Department of Transportation, VA E Eugene Y. Ngai, Chemically Speaking LLC, NJ SE Robert R. Nii, CH2M-WG Idaho, LLC, ID U Richard P. Palluzi, Richard Palluzi LLC, NJ SE Diana C. Parks, State of Al

25、aska Department of Public Safety, AK E Carl H. Rivkin, National Renewable Energy Laboratory, CO U David A. Rohrig, Pacic Northwest National Laboratory, WA U Jerrold Sameth, Compressed Gas Association, Inc., NJ IM Rep. Compressed Gas Association William J. Sattereld, III, Hydrogen Safety, LLC/Rode th

26、e installation of associated storage, piping, and distribution equipment; and operating practices. The Committee also has a technical responsibility for contributions in the same areas for medical gases and clean rooms. The Committee shall coordinate the material on gaseous and liquid hydrogen stora

27、ge and use with the Hydrogen Technology Committee.CONTENTS 51-3 2018 Edition Contents Chapter 1 Administration 51 4 1.1 Scope. . 51 4 1.2 Purpose. . 51 4 1.3 Retroactivity. 51 4 1.4 Equivalency. . 51 4 1.5 Fuel Gases in the Liquid Phase. . 51 5 1.6 Operations and Fire Prevention Practices. 51 5 1.7

28、MaterialOxygen Compatibility. 51 5 1.8 Cylinders and Containers. 51 5 1.9 Units and Formulas. . 51 5 Chapter 2 Referenced Publications 51 5 2.1 General. . 51 5 2.2 NFPA Publications. . 51 5 2.3 Other Publications. . 51 5 2.4 References for Extracts in Mandatory Sections. . 51 6 Chapter 3 Denitions 5

29、1 6 3.1 General. . 51 6 3.2 NFPA Ofcial Denitions. 51 6 3.3 General Denitions. 51 6 Chapter 4 Cylinders and Containers 51 7 4.1 Fabrication and Marking. . 51 7 4.2 Cylinder Storage and Use General. . 51 7 4.3 Fuel Gas Cylinder Storage. . 51 8 4.4 Oxygen Cylinder Storage. . 51 9 4.5 Gas Cabinets. . 5

30、1 9 4.6 Exhausted Enclosures. 51 9 4.7 Gas Rooms. . 51 9 Chapter 5 Manifolding of Cylinders . 51 9 5.1 Fuel Gas Manifolds. 51 9 5.2 High-Pressure Oxygen Manifolds. . 51 9 5.3 Low-Pressure Oxygen Manifolds. . 51 10 5.4 Portable Outlet Headers. 51 10 Chapter 6 Piping Systems 51 11 6.1 Materials and De

31、sign. . 51 11 6.2 Piping Joints. . 51 11 6.3 Installation. 51 11 6.4 Cleaning. . 51 11 6.5 Testing. . 51 12 6.6 Painting and Signs. . 51 12 Chapter 7 Protective Equipment, Hose, and Regulators . 51 12 7.1 General. . 51 12 7.2 Pressure Relief for Piping Systems. 51 12 7.3 Piping Protective Equipment.

32、 51 13 7.4 Station Outlet Protective Equipment. . 51 13 7.5 Hose and Hose Connections. . 51 13 7.6 Pressure-Reducing Regulators. 51 13 Chapter 8 Acetylene Generators . 51 13 8.1 Listing and Marking. . 51 13 8.2 Rating and Pressure Limitations. . 51 13 8.3 Location. 51 14 8.4 Stationary Acetylene Gen

33、erators (Automatic and Nonautomatic). . 51 14 8.5 Outside Generator Houses and Inside Generator Rooms for Stationary Acetylene Generators. 51 15 Chapter 9 Calcium Carbide Storage . 51 15 9.1 Packaging. 51 15 9.2 Storage in Buildings. . 51 15 9.3 Storage Outside Buildings. . 51 15 Chapter 10 Mobile A

34、cetylene Trailer Systems . 51 15 10.1 General Provisions. . 51 15 10.2 Discharge Stations at Consumer Sites. . 51 15 10.3 Indoor Discharge Stations. . 51 16 10.4 Instructions. . 51 16 10.5 Fire Protection. . 51 16 Annex A Explanatory Material 51 18 Annex B Informational References . 51 19 Index . 51 21