NFPA 58 ERTA 1-2013 Liquefied Petroleum Gas Code.pdf

1、 Errata NFPA 58 Liquefied Petroleum Gas Code 2014 Edition Reference: 11.3.2.2 and 14.2.2.2(4) Errata No.: 58-14-1 The Committee on Liquefied Petroleum Gases notes the following errors in the 2014 edition of NFPA 58, Liquefied Petroleum Gas Code. 1. Revise 11.3.2.2 to read as follows: 11.3.2.2 ASME e

2、ngine fuel and mobile containers shall meet the following conditions: (1) An MAWP of 312 psig (2.2 MPag) or higher where installed in enclosed spaces of vehicles (2) An MAWP of 312 psig (2.2 MPag) where installed outside of passenger vehicles (3) An MAWP of 250 psig (1.7 MPag) where installed outsid

3、e of nonpassenger vehicles 2. Revise 14.2.2.2(4) to read as follows: 14.2.2.2 General operating procedures shall include the following: (1) General procedures (see Section 13.4) (2) Combustible material (see 6.4.4.3 and 6.6.5.2) (3) Sources of ignition (see Section 6.23, 6.24.9.4, 7.2.3.2, and 9.4.1

4、0) (4) Signage and markings see 5.2.1.1, 5.7.3.6, 5.7.5, 5.7.8.5, 6.4.4.12, 6.11.5, 6.12.6, 6.12.7, 6.25.3.18, 6.12.12(2), 6.12.12.2, 6.25.3.17, 6.27.4.5, 6.28.4.3(C), 6.28.4.3(D), 7.2.3.6, 9.3.2.10, 9.3.3.7, 9.4.6, 11.3.4, Section 11.12, and 13.2.1.13(3) (5) Containers (see 5.7.3.3, Section 6.6, 6.

5、28.3.1, 7.3.2, 7.3.2.2, 7.3.2.3, 7.3.2.4, 7.4.2, 7.4.3, 8.2.1, and 9.3.2.4) (6) Security and access (see 7.2.3.1) (7) Fire response (see 6.27.4.4) Issue Date: October 8, 2013 (Note: Electronic products and pamphlet reprints may have this errata incorporated. For current information about the NFPA Codes and Standards, including this errata, please see www.nfpa.org/codelist) Copyright 2013 All Rights Reserved NATIONAL FIRE PROTECTION ASSOCIATION