NFPA 80-2016 Standard for Fire Doors and Other Opening Protectives (Effective Date 06 15 2015).pdf

1、NFPA 80 Standard for Fire Doors and Other Opening Protectives 2016 Edition NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471 An International Codes and Standards OrganizationIMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS NOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE OF NFPA STAND

2、ARDS NFPA codes, standards, recommended practices, and guides (“NFPA Standards”), of which the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This process brings together volunteers representing

3、 varied viewpoints and interests to achieve consensus on re and other safety issues. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness

4、of any judgments contained in NFPA Standards. The NFPA disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on NFPA Standar

5、ds. The NFPA also makes no guaranty or warranty as to the accuracy or completeness of any information published herein. In issuing and making NFPA Standards available, the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is the NFPA under

6、taking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. The NFPA h

7、as no power, nor does it undertake, to police or enforce compliance with the contents of NFPA Standards. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certication or other statement of compliance with the requirements of

8、this document shall not be attributable to the NFPA and is solely the responsibility of the certier or maker of the statement. REMINDER: UPDATING OF NFPA STANDARDS Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that NFPA Standards may be amended

9、from time to time through the issuance of Tentative Interim Amendments or corrected by Errata. An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any Tentative Interim Amendment and any Errata then in effect. In order to determine whether an NF

10、PA Standard has been amended through the issuance of Tentative Interim Amendments or corrected by Errata, visit the “Codes email: stds_adminnfpa.org. For more information about NFPA, visit the NFPA website at www.nfpa.org. All NFPA codes and standards can be viewed at no cost at www.nfpa.org/docinfo

11、.80-1 NFPA, and National Fire Protection Association are registered trademarks of the National Fire Protection Association, Quincy, Massachusetts, 02169 Copyright 2015 National Fire Protection Association . All Rights Reserved. NFPA 80 Standard for Fire Doors and Other Opening Protectives 2016 Editi

12、on This edition of NFPA 80, Standard for Fire Doors and Other Opening Protectives, was prepared by the Technical Committee on Fire Doors and Windows. It was issued by the Standards Council on May 26, 2015, with an effective date of June 15, 2015, and supersedes all previous editions. This document h

13、as been amended by one or more Tentative Interim Amendments (TIAs) and/or Errata. See “Codes detailed provisions for information required to be included on a label for re doors, re door frames, re windows, and oversized doors; provisions for addressing re doors too large to be re tested; recognition

14、 of the use of products evaluated for re doors that exceed the maximum allowable bottom clearance; provisions for eld labeling procedures and eld label information; and new provisions for the maximum allowable clearance between a pair of swinging doors and between the door and frame, depending on th

15、e door material. New provisions for the acceptable testing of re dampers and new detailed requirements for the specic test methods required during periodic tests of re dampers have also been included. A new opening protective is addressed in the new Chapter 21, Fire Protective Curtain Assemblies, wh

16、ich provides requirements related to the installation, inspection, testing, and maintenance of those assemblies installed to protect vertical openings. Requirements for glazing labeling are now included in Chapter 4 and duplicate the information found in model building and life safety codes in order

17、 to make the application of glazing provisions more user friendly. Additional technical updates are made to provisions for actuation devices for re doors, re shutters, and re windows, as well as re door maintenance procedures. Provisions for chute doors are revised to include extracted text from NFPA 82, Standard on Incinerators and Waste and Linen Handling Systems and Equipment. Finally, denitions have been added and updated along with referenced publications to maintain the requirements and application of NFPA 80 current with industry trends and practices.