NFPA 90B-2018 Standard for the Installation of Warm Air Heating and Air-Conditioning Systems (Effective Date 08 21 2017).pdf

1、 NFPA 90B Standard for the Installation of Warm Air Heating and Air-Conditioning Systems 2018IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS NOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE OF NFPA STANDARDS NFPA codes, standards, recommended practices, and guides (“NFPA Standards”)

2、, of which the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This process brings together volunteers representing varied viewpoints and interests to achieve consensus on re and other safety iss

3、ues. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in NFPA Standards. The NFPA disclaims liability for a

4、ny personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on NFPA Standards. The NFPA also makes no guaranty or warranty as to the accuracy or completen

5、ess of any information published herein. In issuing and making NFPA Standards available, the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by any person or entity to someone else. Anyone

6、 using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. The NFPA has no power, nor does it undertake, to police or enforce compliance with the co

7、ntents of NFPA Standards. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certication or other statement of compliance with the requirements of this document shall not be attributable to the NFPA and is solely the responsib

8、ility of the certier or maker of the statement. REVISION SYMBOLS IDENTIFYING CHANGES FROM THE PREVIOUS EDITION Text revisions are shaded. A before a section number indicates that words within that section were deleted and a to the left of a table or gure number indicates a revision to an existing ta

9、ble or gure. When a chapter was heavily revised, the entire chapter is marked throughout with the symbol. Where one or more sections were deleted, a is placed between the remaining sections. Chapters, annexes, sections, gures, and tables that are new are indicated with an N. Note that these indicato

10、rs are a guide. Rearrangement of sections may not be captured in the markup, but users can view complete revision details in the First and Second Draft Reports located in the archived revision information section of each code at www.nfpa.org/docinfo. Any subsequent changes from the NFPA Technical Me

11、eting, Tentative Interim Amendments, and Errata are also located there. REMINDER: UPDATING OF NFPA STANDARDS Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that NFPA Standards may be amended from time to time through the issuance of a Tentative I

12、nterim Amendment (TIA) or corrected by Errata. An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any TIAs and Errata then in effect. To determine whether an NFPA Standard has been amended through the issuance of Tentative Interim Amendments or

13、 corrected by Errata, go to www.nfpa.org/docinfo to choose from the list of NFPA Standards or use the search feature to select the NFPA Standard number (e.g., NFPA 13). The document information page provides up-to-date document-specic information as well as postings of all existing TIAs and Errata.

14、It also includes the option to register for an “Alert” feature to receive an automatic email notication when new updates and other information are posted regarding the document. ISBN: 978-145591677-1 (Print) ISBN: 978-145591678-8 (PDF) ISBN: 978-145591760-0 (eBook)IMPORTANT NOTICES AND DISCLAIMERS C

15、ONCERNING NFPA STANDARDS ADDITIONAL NOTICES AND DISCLAIMERS Updating of NFPA Standards Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time t

16、o time through the issuance of Tentative Interim Amendments or corrected by Errata. An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any Tentative Interim Amendments and any Errata then in effect. In order to determine whether a given documen

17、t is the current edition and whether it has been amended through the issuance of Tentative Interim Amendments or corrected through the issuance of Errata, consult appropriate NFPA publications such as the National Fire Codes Subscription Service, visit the NFPA website at www.nfpa.org, or contact th

18、e NFPA at the address listed below. Interpretations of NFPA Standards A statement, written or oral, that is not processed in accordance with Section 6 of the Regulations Governing the Development of NFPA Standards shall not be considered the ofcial position of NFPA or any of its Committees and shall

19、 not be considered to be, nor be relied upon as, a Formal Interpretation. Patents The NFPA does not take any position with respect to the validity of any patent rights referenced in, related to, or asserted in connection with an NFPA Standard. The users of NFPA Standards bear the sole responsibility

20、 for determining the validity of any such patent rights, as well as the risk of infringement of such rights, and the NFPA disclaims liability for the infringement of any patent resulting from the use of or reliance on NFPA Standards. NFPA adheres to the policy of the American National Standards Inst

21、itute (ANSI) regarding the inclusion of patents in American National Standards (“the ANSI Patent Policy”), and hereby gives the following notice pursuant to that policy: NOTICE: The users attention is called to the possibility that compliance with an NFPA Standard may require use of an invention cov

22、ered by patent rights. NFPA takes no position as to the validity of any such patent rights or as to whether such patent rights constitute or include essential patent claims under the ANSI Patent Policy. If, in connection with the ANSI Patent Policy, a patent holder has led a statement of willingness

23、 to grant licenses under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such a license, copies of such led statements can be obtained, on request, from NFPA. For further information, contact the NFPA at the address listed below. Law and Regulat

24、ions Users of NFPA Standards should consult applicable federal, state, and local laws and regulations. NFPA does not, by the publication of its codes, standards, recommended practices, and guides, intend to urge action that is not in compliance with applicable laws, and these documents may not be co

25、nstrued as doing so. Copyrights NFPA Standards are copyrighted. They are made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of safe practices and meth

26、ods. By making these documents available for use and adoption by public authorities and private users, the NFPA does not waive any rights in copyright to these documents. Use of NFPA Standards for regulatory purposes should be accomplished through adoption by reference. The term “adoption by referen

27、ce” means the citing of title, edition, and publishing information only. Any deletions, additions, and changes desired by the adopting authority should be noted separately in the adopting instrument. In order to assist NFPA in following the uses made of its documents, adopting authorities are reques

28、ted to notify the NFPA (Attention: Secretary, Standards Council) in writing of such use. For technical assistance and questions concerning adoption of NFPA Standards, contact NFPA at the address below. For Further Information All questions or other communications relating to NFPA Standards and all r

29、equests for information on NFPA procedures governing its codes and standards development process, including information on the procedures for requesting Formal Interpretations, for proposing Tentative Interim Amendments, and for proposing revisions to NFPA standards during regular revision cycles, s

30、hould be sent to NFPA headquarters, addressed to the attention of the Secretary, Standards Council, NFPA, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101; email: stds_adminnfpa.org. For more information about NFPA, visit the NFPA website at www.nfpa.org. All NFPA codes and standards can be

31、 viewed at no cost at www.nfpa.org/docinfo.90B-1 NFPA and National Fire Protection Association are registered trademarks of the National Fire Protection Association, Quincy, Massachusetts 02169. Copyright 2017 National Fire Protection Association . All Rights Reserved. NFPA 90B Standard for the Inst

32、allation of Warm Air Heating and Air-Conditioning Systems 2018 Edition This edition of NFPA 90B, Standard for the Installation of Warm Air Heating and Air-Conditioning Systems, was prepared by the Technical Committee on Air Conditioning. It was issued by the Standards Council on August 1, 2017, with

33、 an effective date of August 21, 2017, and supersedes all previous editions. This edition of NFPA 90B was approved as an American National Standard on August 21, 2017. Origin and Development of NFPA 90B This standard dates from 1899, when committee attention was rst given to blower and exhaust syste

34、ms. Prior to 1936, the subject of air conditioning was covered in NFPA standards on blower systems. In 1937, it was decided to prepare a separate standard on air-conditioning, warm air heating, and ventilating systems. This standard was initially adopted in 1937 with subsequent amendments in 1938, 1

35、939, 1940, 1942, 1950, 1952, 1955, 1956, 1960, 1961, 1963, 1964, 1965, 1968, 1971, 1973, 1976, 1980, 1984, and 1989. The 1993 and 1996 editions were reconrmations of the 1989 edition. The 1999 edition contained changes that were mainly editorial in nature. The 2002 edition incorporated format change

36、s to comply with the Manual of Style for NFPA Technical Committee Documents and new provisions for the removal of accessible abandoned materials in concealed spaces and plenums. The only changes to the 2006 edition were to update “ame spread rating” to “ame spread index.” The major change in the 200

37、9 edition was to replace the references to NFPA 255 with ANSI/UL 723 and ASTM E84, because NFPA 255 was withdrawn. All three test standards were quite similar. The changes in the 2012 edition were edition updates of the referenced standards. For the 2015 edition, the changes were primarily editorial

38、 alterations, reference updates, and clarications of existing language. Also, a section and test method for air dispersion systems was added. For the 2018 edition, the changes are primarily editorial alterations, reference updates, and clarications of existing language. Also, a new requirement for d

39、uct sealants has been added.INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS 90B-2 2018 Edition Technical Committee on Air Conditioning Ralph D. Gerdes, Chair Ralph Gerdes Consultants, LLC, IN SE Ramzi A. Amawi, Intertek Testing Services, OH RT Joseph F. Andre, Steel Tube Institute, WA

40、M Rep. Steel Tube Institute of North America Justin B. Biller, Carilion Clinic, VA U James S. Buckley, Jacobs, TX IM Rep. American Society of Heating, Refrigeration & Air Conditioning Engineers, Inc. Laurence W. Caraway, Jr., Kitchen Klean Inc., NH IM Rep. National Air Duct Cleaners Association Mich

41、ael Earl Dillon, Dillon Consulting Engineers, Inc., CA SE James T. Dollard, Jr., IBEW Local Union 98, PA L Rep. International Brotherhood of Electrical Workers Jonathan Flannery, AHA - ASHE, AR U Thomas P. Hammerberg, Automatic Fire Alarm Association, Inc., GA M Rep. Automatic Fire Alarm Association

42、, Inc. John C. Harrington, FM Global, MA I Jonathan Hartsell, Rodgers, NC IM Marcelo M. Hirschler, GBH International, CA M Rep. American Fire Safety Council/Plenum Cable Assn. Eli P. Howard, III, Sheet Metal & Air Conditioning Contractors Natl. Assn., VA IM Anthony Hurst, Mason & Hanger, KY SE Ralph

43、 A. Koerber, ATCO Rubber Products, Inc., TX M Rep. Air Diffusion Council William E. Koffel, Koffel Associates, Inc., MD M Rep. Society of the Plastics Industry, Inc. Timothy J. Orris, AMCA International, Inc., IL M Rep. Air Movement & Control Association Ajay V. Prasad, JENSEN HUGHES, MD SE Rep. JEN

44、SEN HUGHES Michael Schmeida, Gypsum Association, OH M Dwayne E. Sloan, UL LLC, NC RT George A. Straniero, AFC Cable Systems, Inc., NJ M Rep. National Electrical Manufacturers Association Alternates Diane B. Copeland, Dillon Consulting Engineers, Inc., CA SE (Alt. to Michael Earl Dillon) Charles C. C

45、ottrell, North American Insulation Manufacturers Assn., VA M (Voting Alt.) Thomas M. Dusza, JENSEN HUGHES, CA SE (Alt. to Ajay V. Prasad) David L. Hall, Apollo America Inc., MI M (Alt. to Thomas P. Hammerberg) Amando Lyndyll Hisole, ccrd partners, TX SE (Voting Alt.) Randall K. Laymon, UL LLC, IL RT

46、 (Alt. to Dwayne E. Sloan) Michael Lloyd, Honeywell International, Inc., IL M (Alt. to George A. Straniero) Harold C. Ohde, IBEW 134/Electrical Joint Apprenticeship Training & Trust, IL L (Alt. to James T. Dollard, Jr.) Mark Terzigni, Sheet Metal & Air Conditioning Contractors Natl. Assn., VA IM (Al

47、t. to Eli P. Howard, III) William A. Webb, WEBB FIRE Protection Consulting, LLC, FL IM (Alt. to James S. Buckley) Allan Fraser, NFPA Staff Liaison This list represents the membership at the time the Committee was balloted on the nal text of this edition. Since that time, changes in the membership ma

48、y have occurred. A key to classications is found at the back of the document. NOTE: Membership on a committee shall not in and of itself constitute an endorsement of the Association or any document developed by the committee on which the member serves. Committee Scope: This Committee shall have prim

49、ary responsibility for documents on the construction, installation, operation, and maintenance of systems for air conditioning, warm air heating, and ventilating including lters, ducts, and related equipment to protect life and property from re, smoke, and gases resulting from re or from conditions having manifestations similar to re.CONTENTS 90B-3 2018 Edition Contents Chapter 1 Administration 90B 4 1.1 Scope. . 90B 4 1.2 Purpose. . 90B 4 1.3 Application. 90B 4 1.4 Equivalency. . 9