REG NASA-LLIS-0715-2000 Lessons Learned Near Field Measurement for Large Aperature Antenna Pattern Determination.pdf

1、Best Practices Entry: Best Practice Info:a71 Committee Approval Date: 2000-03-16a71 Center Point of Contact: GRCa71 Submitted by: Wil HarkinsSubject: Near Field Measurement for Large Aperature Antenna Pattern Determination Practice: Use near field antenna measurement facilities for determination of

2、far field antenna patterns of large aperture, high frequency antennas (For the purposes of this Guideline, “large aperture, high frequency antennas“ are those antennas for which the far field (D2/l) distance exceeds reasonable building size and/or controlled range space. See Technical Rationale in t

3、his Guideline.) This guideline supports reliable communications with spacecraft.Programs that Certify Usage: N/ACenter to Contact for Information: GRCImplementation Method: This Lesson Learned is based on Reliability Guideline Number GT-TE-2402 from NASA Technical Memorandum 4322A, NASA Reliability

4、Preferred Practices for Design and Test.Benefit:For high frequency, large aperture antennas, near field antenna facilities provide more timely, cost effective, and efficient pattern measurements resulting in the following benefits:Provided by IHSNot for ResaleNo reproduction or networking permitted

5、without license from IHS-,-,-1. protection for environmentally (and gravitationally) sensitive antennas from elements such as wind, rain, smog, wildlife, etc.;2. characterization of complete far field pattern over region corresponding to sampled near field;3. measurements are not affected by weather

6、 or uncontrolled reflections;4. diagnostic capability for feed misalignment, phased array element amplitude and phase excitation, holographic determination of reflector surface accuracy; and5. depending on range geometry, accurate characterization of far sidelobes and backlobe patterns;6. accurate f

7、ar-field pattern construction of both co- and cross-polarization patterns from the same set of near field data.Implementation Method:The implementation of near field antenna measurements for the determination of far field antenna patterns involves the following. A near-field probe is placed in close

8、 proximity to an antenna under test. The probe or test antenna or both are moved in such a manner that a set of complex field measurements can be made at known locations, with respect to the test antenna. The surface containing the measurements should, in general, completely enclose the antenna. How

9、ever, for most directional (larger aperture) antennas, an abbreviated plane, which intercepts all but a small percentage of the radiated energy, can be used, resulting in negligible loss in accuracy. A spherical, cylindrical, planar, or other convenient surface can be used. At each measurement point

10、, on the measurement surface, the complex field and position are measured. The set of measurements are transformed, via near-field to far field transformation algorithms, to obtain the far field patterns for the test antenna.The near field antenna test facility at LeRC is in an in-door, environmenta

11、lly controlled test area. The facility contains a moveable antenna mount that is used to orient and position the antenna and a structure used to move the near-field probe within a 22 ft x 22 ft vertical plane. The facility is designed to test antennas with horizontal orientation of the antenna bores

12、ite. A block diagram of the LeRC Near Facility is shown in Figure 1, below.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-refer to D descriptionD A laser distance measuring system, shown in Figure 1, is used to measure x and y position of the probe

13、in the scan plane. The complex electric field is measured at each measurement point in the scan plane using a Hewlett Packard 8510 automated network analyzer; and Hewlett Packard 8340 frequency synthesizers are used to provide RF and local oscillator signal sources. Fiber optic links are used to dis

14、tribute local oscillator signal to RHG mixers. The data acquisition and system control are performed by an on-site computer. Data processing is performed in an offsite computer facility. The LeRC near field test facility was designed for frequencies of operation from 0.8 GHz to 60 GHz. The scanner c

15、an test antennas having a D/l to 1100 for antenna apertures up to 18 ft. D is a characteristic dimension of the test antenna (i.e. diameter for a circular aperture antenna), andl is the wavelength for the antenna operating frequency. For detailed description of design, operation and performance see

16、references 1, 2, and 3. Other near field antenna test facilities within NASA (see Appendix) are located at JPL, and JSC.In selecting a near field range for antenna testing, just as in selecting a far field range, attention must be given to the determination of measurement uncertainty. This can be of

17、 importance for applications requiring low measurement uncertainties or high precision. As in far field ranges, near field ranges are affected by electronic equipment sources of error such as drift, noise, dynamic range, nonlinearity, signal leakage, and reflections. However, the error manifestation

18、s may differ between the near field and far field ranges. In addition, the near field range is affected by error sources from probe interactions with the near fields, probe position, antenna alignment, and errors caused by flexing cables. Mathematical errors are generally very small in comparison to

19、 experimental errors. For more information on the effects of errors in near field antenna testing see references 6 and 7.Technical Rationale:Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-The measurement of far field antenna patterns can be accompli

20、shed by using a far field range or a near field measurement facility. For measurements made in the far field, the distance between the test antenna and the measurement transmitting source (or receiver) must be greater than 2D2/l, where D is a characteristic dimension of the test antenna and l is the

21、 wavelength. (For antennas having significant aperture phase deviations and requiring low measurement uncertainties, the spacing required can exceed 8D2/l.) From this relation it can be seen that large distances are required for far field testing of large aperture, high frequency antennas. For examp

22、le the test distance required for far field pattern measurement of a 12 GHz parabolic reflector antenna with a 12 ft diameter would be 3500 ft. Because of the large distances the far field tests are conducted outdoors where the testing is constrained by weather and the transmission path is influence

23、d by the weather. In addition, the path between the test antenna and the source must be controlled to preclude variations due to reflections from traffic entering the path.The determination of far field antenna patterns, obtained by using near field measurements, has been demonstrated and proven, re

24、ferences 4 and 5. The validity and accuracies have been shown to be comparable to measurements made using far field ranges, under conditions controlled to preclude environment errors. The determination of far field antenna patterns, from near field measurements, can be done indoors in a protected, c

25、ontrolled environment, where the testing is not constrained by the effects of weather on the test antenna or results. The anechoic environment can provide protection for costly flight hardware from weather, smog, wildlife, and other environmental hazards. The region of testing can be designed and co

26、ntrolled to minimize the effects of reflections. And, for spacecraft antennas designed in a microgravity environment, the effects of gravitational deformations can be reduced or eliminated when tests are conducted with vertical boresite orientations. These advantages are gained at the expense of inc

27、reased measurement times and complexity. Many measurements must be made to define the near field pattern, see reference 7. The set of near field measurements must be made up of complex field quantities (e.g., a+jb) and an accurate determination of probe position. Data acquisition time is a function

28、of desired accuracy, aperture area, and frequency. In addition, computation time is required to transform the near field data to the far field patterns.Appendix:This appendix provides a listing of near field antenna test facilities within NASA, and lists their salient characteristics. The table belo

29、w lists the location of the facility, the type of scanning surface used, the size of the scanning plane, the maximum frequency of operation, and antenna boresite orientation. The table also describes the mode of operation supported for the test antenna, i.e. transmitting and/or receiving, and notes

30、if the test antenna must be moved during testing.Location Type Size, m Frequency, GHz Boresite Orientation Mode Probe motion Note Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-JPL Cylindrical 5.2 18 horizontal trans 1d rotate antenna JPL Plane pola

31、r 6.1 32 vertical trans 1d rotate antenna JSC Plane rectangular 12.2x12.2 40 vertical trans 2d fixed LeRC Plane rectangular 6.7x6.7 60 horizontal trans rec 2d fixed The following is a brief description of each centers near-field capability.Jet Propulsion Laboratory Cylindrical Near-Field FacilityThe

32、 cylindrical near-field scanning facility at JPL contains an anechoic chamber that is 20x20x40. The chamber contains two automated positioners, one for the test antenna and the other for the sampling probe. Cylindrical near-field scanning is performed by rotating the test antenna in an azimuth direc

33、tion while the probe step along the z-direction after the test antenna completes a full 360 degree rotation. The Jet Propulsion Laboratory has conducted recently an extensive research in the area of cylindrical near-field that led to the development of efficient and fast algorithms for far field con

34、struction, probe pattern compensation, probe characterization, and an error analysis.Plane-polar Near-Field FacilityThe plane-polar near-field range facility is located in an anechoic chamber with a dimension of 20x20x40. The facility utilizes two automated positioners, one for the test antenna (gen

35、erally has a large planer aperture) and the other for the sampling probe. The test antenna aperture is horizontally situated close to the ground with the aperture placed in the x-y plane facing up and rotated azimuthally around the z-axis. The probe is situated close to the ceiling facing down with

36、a single linear translational motion in the x or y direction above and across the center of the test antenna. The probe is generally separated several wavelengths away from the test antenna. The near-field amplitude and phase data are taken with the probe initiated at a particular incremental locati

37、on while the test antenna is rotated 360 degrees incrementally, which is repeated at the next incremental probe location, etc. The probe has a total rms deflection of 0.025 cm over the total run of the carriage (7m long). This provides sufficient accuracy for measurement up to Ku-band and can be imp

38、roved for Ka-band measurement.Johnson Space Center Plane Rectangular Near-Field FacilityProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-The anechoic chamber at the Johnson Space Center is capable of testing antennas up to 30 ft in diameter. The frequ

39、ency range of the facility is from 1.0 Ghz to 60.0 Ghz. The near-field facility includes a two-axis horizontal scanning system. The scanner is configured with a RF probe which can function as a transmitter or receiver. The probe travels in the Y-direction for each step increment moved by the transla

40、tion beam in the X-direction. The movement of the scanner will describe a raster scan geometry.During testing, the position of the test antenna will be fixed such that its boresight will be perpendicular to the horizontal scan plane of approximately 40x38. The planarity of the scanner as described b

41、y the probe tip motion will be flat within +/- 0.005 inch. This accuracy is especially critical at the maximum operating frequency of 60.0 GHz.References:1. Sharp, G. R., et al: “Characteristics and Capabilities of the NASA LeRC High Precision 6.7-by 6.7-m Planer Near-Field Scanner,“ NASA TM 83785,

42、October 1984.2. Kunath, Richard R. and Zakrajsek, Robert J.: “Near-Field Testing of the 30-GHz TRW Proof-of-Concept Multibeam Antenna,“ NASA TM 87357, September 1986.3. Kunath, Richard R., and Garrett, Michael J.: “Near-Field Antenna Testing Using the Hewlett Packard 8510 Automated Network Analyzer,

43、“ NASA TM 103699, October 1990.4. Joy, Edward B. and Paris, Demetrius T.: “Spatial Sampling and Filtering in Near-Field Measurements,“ IEEE Trans. Antennas and Propagation, Vol. AP-20, May 1972, pp. 253-261.5. Newell, A. C., and Crawford, M. L.: “Planar Near-Field Measurements on High Performance Ar

44、ray Antennas,“ NBS, NBSIR 74-380, July 1974.6. Evans, Gary E.: “Antenna Measurement Techniques,“ Artech House Inc., 1990.7. Acosta, Roberto J., and Lee, Richard Q.: “Case Study of Sample Spacing in Planar Near-Field Measurement of High Gain Antennas,“ NASA TM 86872, September 1984.8. Yaghjian, A. D.

45、: “Near-Field Antenna Measurement on Cylindrical Surface: A Source Scattering Matrix Formulation,“ NBS Tech. note 698, July 1977.Impact of Non-Practice: Failure to use near field measurements for determining far field patterns of high frequency, large aperture antennas, constrains testing due to exp

46、osure of test antenna to weather. In addition, test results can may be influenced by local weather conditions and the existence of uncontrolled reflections from traffic within the region of the test path.Related Practices: N/AProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Additional Info: Approval Info: a71 Approval Date: 2000-03-16a71 Approval Name: Eric Raynora71 Approval Organization: QSa71 Approval Phone Number: 202-358-4738Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-