REG NASA-LLIS-0732--2000 Lessons Learned Electrostatic Discharge (ESD) Control In Flight Hardware.pdf

1、Best Practices Entry: Best Practice Info:a71 Committee Approval Date: 2000-04-03a71 Center Point of Contact: GSFCa71 Submitted by: Wilson HarkinsSubject: Electrostatic Discharge (ESD) Control In Flight Hardware Practice: Apply an Electrostatic Discharge (ESD) Control Program to all spaceflight proje

2、cts to ensure that ESD susceptible hardware is protected from damage due to ESD.Programs that Certify Usage: This practice has been used on all Flight Programs managed by the Goddard Space Flight Center (GSFC).Center to Contact for Information: GSFCImplementation Method: This Lesson Learned is based

3、 on Reliability Practice No. PD-ED-1249; from NASA Technical Memorandum 4322A, NASA Reliability Preferred Practices for Design and Test.This ESD Control Practice significantly enhances mission reliability by protecting susceptible flight and critical flight support electronic parts and related hardw

4、are from damage and/or degradation caused by ESD and Induction Polarization Charge (IPC) during the prelaunch phases of the mission.Implementation Method:NHB 5300.4 (3L) “Requirements for Electrostatic Discharge Control “ (Reference 1) specifies the NASA requirements for ESD avoidance and control. I

5、t describes basic considerations and requirements for ESD control programs including responsibilities of NASA Installations for invoking ESD control programs. GSFC Document No. P-303-840 “Electrostatic Control Program“ (Reference 2) describes the ESD control program that has been established by GSFC

6、 for its spaceflight projects. The GSFC program incorporates Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-the ESD requirements of Reference 1.The Reference 1 and 2 documents as well as this practice do not include ESD control requirements and prog

7、rams for electrically initiated explosive devices. Special requirements for the control of these devices exist at the various NASA centers.This ESD Control Practice describes the procedures and controls whereby ESD sensitive components and devices are received, distributed, assembled, disassembled,

8、handled, tested, repaired, and stored at GSFC. This practice applies to spacecraft, launch vehicles, mission peculiar equipment, mission-essential support equipment and elements thereof; when invoked contractually in procurements.The Practice includes many elements with many details. This descriptio

9、n of the Practice can only cover the highlights with limited details. Refer to Reference 2 for complete details and a list of references to ESD control documents. The following are the primary features and requirements of this Practice.Quality Assurance Responsibilities for the ESD Program:ESD train

10、ed and certified personnel are assigned to support each project and are responsible for the following items:1). Follow established procedures to verify that all ESD requirements are complied with in applicable work areas.2). Certify the adequacy of ESD-controlled areas and grounded work stations pri

11、or to their use.3). Ensure the use of protective personnel clothing and proper personnel grounding at all locations where ESD sensitive components and devices are handled.4). Ensure that all personnel with access to ESD controlled areas and who handle ESD sensitive components and devices have been t

12、rained and certified in accordance with Reference 2.5). Perform audits to assure the integrity of ESD-controlled areas.6). Verify that all documentation including drawings and work instructions contain ESD marking precautions and handling procedures as appropriate.7). Verify proper ESD markings or l

13、abels on ESD dissipating or shielding boxes/carriers/bags containing ESD sensitive components and devices, printed circuit boards or flight ready hardware with ESD sensitive components and devices.8). Ensure that purchase documentation includes ESD requirements as appropriate.9). Ensure that all han

14、dling of ESD sensitive components and devices are performed in ESD controlled Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-areas.10). Prepare and maintain internal records of each certification and audit to ensure compliance with the ESD Control P

15、rogram.11). Provide internal reports to the project and to the AMO with results and recommendations from audits.12). Ensure that corrective actions are initiated for all NASA deficiencies noted during audits and certifications.Responsibility for ESD Work Sites and Spaces and for Workstations:The org

16、anizations responsible for the facilities where work/test sites or spaces are assigned are responsible for the implementation of the ESD Programs in their facilities. The cognizant System/Subsystem Electrical Engineer is responsible for the initial setup of ESD approved work stations.ESD Training of

17、 Personnel:All personnel with access to ESD-controlled areas and those who handle ESD sensitive components and devices receive training from an approved NASA training Facility. Additionally, those with any management or quality assurance responsibilities for ESD sensitive components and devices also

18、 receive training. This includes project management personnel, engineering, test, and integration personnel, acquisition and quality assurance personnel, field engineers for installation and maintenance where appropriate, and production, material handling, and stockroom personnel as appropriate. Jan

19、itorial and facility maintenance personnel receive on-site training and/or facility/project procedures as needed. Each individual attends one of several specific courses appropriate for his/her job assignment. All certified personnel must have their certification card with them whenever they are per

20、forming tasks which require ESD control. Certification must be renewed every two years.ESD Control Requirements:A long list of ESD control requirements too long to include herein is imposed when ESD sensitive components and devices are handled. The following is an outline of these requirements. Refe

21、r to Reference 2 for complete details.a71 Control of ESD-controlled areas including personnel access and relative humidity.a71 Control of ESD work surfaces and floors.a71 Receiving and shipment of ESD devices.a71 Equipment and materials used in the protection and handling of ESD devices.a71 Protecti

22、ve packaging materials.ESD Audits:Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ESD-certified AMO personnel conduct audits of the facilities and the personal and work station equipment handling ESD devices in accordance with Reference No 2. These a

23、udits are scheduled in accordance with the schedule shown in Table 1.TABLE 1. ESD CERTIFICATION AND PERIODIC INSPECTIONSUBJECTINITIAL CERTIFICATIONCONTINUOUSEACH WORK SHIFTMONTHLYSEMI-ANNUALLYANNUALLYWork Surface Resistivity (Including ESD Dissipative Mats)X X Work Surface GroundingX X Work Surface

24、Solvent ResistanceX XWork Surface Static Charge DissipationX X Wrist Strap Release ForceX X Wrist and/or Heel Strap ContinuityX X Tool and Equipment GroundingX X Stool and Chair GroundingX X Facility Earth GroundX X Provided by IHSNot for ResaleNo reproduction or networking permitted without license

25、 from IHS-,-,-ESD Controlled Area Metal Frame EntryDoorsX X Humidity (RH)X X Certification of Electrostatic Field Survey MeterX X Monitoring Static LevelsX X Nuclear Air Ionizer EffectivenessX X Corona Discharge Air Ionizer EffectivenessX X Check both Ionizers for: Ion BalanceEMI RadiationX XX XSold

26、ering Iron Tip GroundingX X Cart, Wagon and Tram Grounding (When Used)X X Temperature ChambersX XProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Personnel Garmets (Testing Physical Condition with an Eslectrostatic Field Survey Meter)X X Part of the a

27、udit is monitoring the testing of the equipment and recording the test measurements and the electrostatic voltage readings of the ESD-controlled work stations and areas. Records are kept of all ESD audit data, corrective actions, written reports on corrective actions, and follow up ESD audits conduc

28、ted after corrective actions have been completed. Formal reports are prepared from these records and include comments/observations on any ESD-control deficiencies and suggestions for preventing recurrence.Technical Rationale:The generation of triboelectric and electrostatic charges are a common caus

29、e of damage and/or degradation to unprotected ESDS devices. A carefully devised and implemented ESD control program can provide protection from this damage and/or degradation.References1. NHB 5300.4 (3L), Requirements for Electrostatic Discharge Control (Excluding Electrically Initiated Explosive De

30、vices)2. GSFC Document No. P-303-840, Electrostatic Discharge (ESD)Control ProgramImpact of Non-Practice: Not following this practice in the handling of ESDS devices can and most likely will result in damage to these devices. One common form of this damage is a deterioration-to-failure process which

31、 may not be detected by ground testing. The damaged device may result in early degradation in performance or in mission failure.Related Practices: N/AAdditional Info: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Approval Info: a71 Approval Date: 2000-04-03a71 Approval Name: Eric Raynora71 Approval Organization: QSa71 Approval Phone Number: 202-358-4738Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-