SAE AMS 2806C-2008 Identification Bars Wire Mechanical Tubing and Extrusions Carbon and Alloy Steels and Corrosion and Heat-Resistant Steels and Alloys《碳钢、合金钢、耐腐蚀及耐热钢和合金的棒材、线材、机械管形.pdf

1、_ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there

2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2013 SAE International All rights reserved. No part of this publication m

3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U

4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS2806C AEROSPACE MATERIAL SPECIFICATION AMS2806 REV. C Issued 1976-07 Revised 2008-03 Reaffirmed 2013-04 Superseding AMS2806B Identification Bars, Wire, Mechanical Tubing, and Extrusions Carbon and Alloy Steels and Corrosion and Heat-Resistant Steels and Alloys RATIONALE AMS2806C has been reaffirmed to comply with the SAE five-year review policy. SAE AMS2806C Page 2 of 2