SAE AMS 2807B-2008 Identification Carbon and Low-Alloy Steels Corrosion and Heat-Resistant Steels and Alloys Sheet Strip Plate and Aircraft Tubing《碳钢和低合金钢、耐腐蚀及耐热钢和合金的薄板材、带材、厚板材和航空.pdf

1、_ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there

2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this publication m

3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U

4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS2807B AEROSPACE MATERIAL SPECIFICATION AMS2807 REV. B Issued 1991-04 Revised 2008-02 Reaff

5、irmed 2012-08 Superseding AMS2807A Identification Carbon and Low-Alloy Steels, Corrosion and Heat-Resistant Steels and Alloys Sheet, Strip, Plate, and Aircraft Tubing RATIONALE AMS2807B has been reaffirmed to comply with the SAE five-year review policy. SAE AMS2807B Page 2 of 4 SAE AMS2807B Page 3 of 4 SAE AMS2807B Page 4 of 4