1、_ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2017 SAE International All rights reserved. No part of this p
3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497
4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/standards.sae.org/AMS4277A AEROSPACE MATERIAL SPECIFICATION AMS4277 REV. A Issued 1997-12 Revised 2005-08 Reaffir
5、med 2017-11 Superseding AMS4277 Aluminum Alloy, Sheet 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-0) Annealed, Fine Grained (Composition similar to UNS A97075) RATIONALE AMS4277A has been reaffirmed to comply with the SAE Five-Year Review policy. SAE INTERNATIONAL AMS4277A Page 2 of 7_ SAE INTERNATIONAL AMS4277A Page 3 of 7_ SAE INTERNATIONAL AMS4277A Page 4 of 7_ SAE INTERNATIONAL AMS4277A Page 5 of 7_ SAE INTERNATIONAL AMS4277A Page 6 of 7_ SAE INTERNATIONAL AMS4277A Page 7 of 7_
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1