SAE AMS 5223F-2002 Iron-Nickel Alloy Strip 49Fe - 5 3Cr - 42Ni - 2 5Ti - 0 55Al Solution Heat Treated Cold Rolled 10% Reduction (UNS N09902)《UNS N09902经溶液热处理 冷轧和减少10%的49Fe-5 3Cr-42.pdf

1、_SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref

2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE International All rights reserved. No part of this pub

3、lication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970

4、(outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5223FAEROSPACEMATERIALSPECIFICATIONAMS5223 REV. F Issued 1952-11 Revised 2002-01

5、Reaffirmed 2012-02 Superseding AMS5223E Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 10% Reduction (Composition similar to UNS N09902)RATIONALEAMS5223F has been reaffirmed to comply with the SAE five-year review policy. SAE AMS5223F Page 2 of 6 SAE AMS5223F Page 3 of 6 SAE AMS5223F Page 4 of 6 SAE AMS5223F Page 5 of 6 SAE AMS5223F Page 6 of 6