SAE AMS 5819A-2001 Cobalt Alloy Corrosion and Heat Resistant Hardfacing Rod and Wire 62Co - 27Cr - 2 9Ni - 5 5Mo (UNS R30021)《耐腐蚀和耐热钴合金 硬面焊条和金属丝 62Co-27Cr-2 9Ni-5 5Mo UNS R30021》.pdf

1、_SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref

2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this publication ma

3、y be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside US

4、A) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5819AAEROSPACEMATERIALSPECIFICATIONAMS5819 REV. A Issued 1995-05 Revised 2001-11 Reaffirmed

5、2012-10 Superseding AMS5819 Cobalt Alloy, Corrosion and Heat Resistant, Hardfacing Rod and Wire 62Co - 27Cr - 2.9Ni - 5.5Mo (Composition similar to UNS R30021) RATIONALEThis document has been reaffirmed to comply with the SAE five-year review policy. SAE AMS5819A Page 2 of 5 SAE AMS5819A Page 3 of 5 SAE AMS5819A Page 4 of 5 SAE AMS5819A Page 5 of 5 PREPARED BY AMS COMMITTEE “F”