SAE AMS 5937-2007 Steel Corrosion-Resistant Bars Wire and Forgings 12Cr - 11Ni - 2Mo 1 5Al 0 3Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated Prec.pdf

1、_SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref

2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this publication ma

3、y be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside US

4、A) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5937AEROSPACEMATERIALSPECIFICATIONAMS5937 Issued 2007-05 Reaffirmed 2012-10 Steel, Corrosion

5、-Resistant, Bars, Wire, and Forgings 12Cr - 11Ni - 2Mo 1.5Al 0.3Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable RATIONALEThis document has been reaffirmed to comply with the SAE five-year review policy. SAE AMS5937 Page 2 of 8 SAE AMS5937 Page 3 of 8 SAE AMS5937 Page 4 of 8 SAE AMS5937 Page 5 of 8 SAE AMS5937 Page 6 of 8 SAE AMS5937 Page 7 of 8 SAE AMS5937 Page 8 of 8 PREPARED BY AMS COMMITTEE “F”