1、SAE-AMS-I-23053/2ADOPTION NOTICESAE-AMS-I-23053/2, “Insulation Sleeving, Electrical, HeatShrinkable, Polyvinyl Chloride, Flexible, Crosslinked andNon-Crosslinked“, was adopted on 28-MAR-01 for use by theDepartment of Defense (DoD). Proposed changes by DoDactivities must be submitted to the DoD Adopt
2、ing Activity:Commander, Naval Air Warfare Center, Aircraft Division, Code414100B120-3, Highway 547, Lakehurst, NJ 08733-5100. Copies ofthis document may be purchased from the Society of AutomotiveEngineers, Inc., 400 Commonwealth Drive, Warrendale, PA19096-0001. http:/www.sae.org/_SAE-AMS-I-23053/2
3、should be used instead of MIL-I-23053/2C, whichwas canceled on 28 March 2001.Custodians: Adopting Activity:Navy - AS(Project 5970-1248)Army - CRNavy - ASAir Force - 11DLA - GSReviewer Activities:Army - EA, MINavy - ECAir Force - 99FSC 5970DISTRIBUTION STATEMENT A: Approved for public release; distri
4、butionis unlimited.Copyright 2000 Society of Automotive Engineers, Inc. Printed in the U.S.A.All rights reserved. .TO PLACE A DOCUMENT ORDER: (724) 776-4970 FAX: (724) 776-0790 SAE WEB ADDRESS: http:/www.sae.org400 Commonwealth Drive, Warrendale, PA 15096-0001SAETechnicalStandardsBoard Rulesprovide
5、that: “Thisreportispublished bySAEto advance the state of technicaland engineering sciences.The use of thisreport isentirelyvoluntary,anditsapplicabilityand suitabilityforanyparticularuse, including anypatent infringement arising therefrom, isthe soleresponsibilityof theuser.”SAEreviewseach technica
6、lreport atleast everyfiveyearsat which time itmaybe reaffirmed, revised,orcancelled. SAEinvitesyourwritten commentsand suggestions.SHEET 1 OF 6AMS-I-23053/2THIRD ANGLE PROJECTIONAMS SPECIFICATIONAMS-I-23053/2ISSUED 2000-06INSULATION SLEEVING, ELECTRICAL, HEATSHRINKABLE, POLYVINYL CHLORIDE, FLEXIBLE,
7、CROSSLINKED AND NON-CROSSLINKEDPREPARED BY SAE COMMITTEE AMS-CEFEDERAL SUPPLY CLASS 5970NOTICETHIS DOCUMENT HAS BEEN TAKEN DIRECTLY FROM U.S. MILITARY SPECIFICATION MIL-I-23053/2C, AMENDMENT 1, NOTICE 1 AND CONTAINS ONLY MINOR EDITORIAL AND FORMAT CHANGES REQUIRED TO BRING IT INTO CONFORMANCE WITH T
8、HE PUBLISHING REQUIREMENTS OF SAE TECHNICAL STANDARDS. THE INITIAL RELEASE OF THIS DOCUMENT IS INTENDED TO REPLACE MIL-I-23053/2C, AMENDMENT 1, NOTICE 1. ANY PART NUMBERS ESTABLISHED BY THE ORIGINAL SPECIFICATION REMAIN UNCHANGED.THE ORIGINAL MILITARY SPECIFICATION WAS ADOPTED AS AN SAE STANDARD UND
9、ER THE PROVISIONS OF THE SAE TECHNICAL STANDARDS BOARD (TSB) RULES AND REGULATIONS (TSB 001) PERTAINING TO ACCELERATED ADOPTION OF GOVERNMENT SPECIFICATIONS AND STANDARDS. TSB RULES PROVIDE FOR (A) THE PUBLICATION OF PORTIONS OF UNREVISED GOVERNMENT SPECIFICATIONS AND STANDARDS WITHOUT CONSENSUS VOT
10、ING AT THE SAE COMMITTEE LEVEL, AND (B) THE USE OF THE EXISTING GOVERNMENT SPECIFICATION OR STANDARD FORMAT.UNDER DEPARTMENT OF DEFENSE POLICIES AND PROCEDURES, ANY QUALIFICATION REQUIREMENTS AND ASSOCIATED QUALIFIED PRODUCTS LISTS ARE MANDATORY FOR DOD CONTRACTS. ANY REQUIREMENT RELATING TO QUALIFI
11、ED PRODUCTS LISTS (QPLS) HAS NOT BEEN ADOPTED BY SAE AND IS NOT PART OF THIS SAE TECHNICAL DOCUMENT.400 Commonwealth Drive, Warrendale, PA 15096-0001INSULATION SLEEVING, ELECTRICAL, HEATSHRINKABLE, POLYVINYL CHLORIDE, FLEXIBLE,CROSSLINKED AND NON-CROSSLINKEDAMS SPECIFICATIONAMS-I-23053/2SHEET 2 OF 6
12、AMS-I-23053/2THE COMPLETE REQUIREMENTS FOR PROCURING THE SLEEVING DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE ISSUE IN EFFECT OF MIL-I-23053.INACTIVE FOR NEW DESIGNREQUIREMENTS:THESE SLEEVINGS SHALL BE EXCLUDED FROM USE ON ALL SPACE VEHICLES, ALL AIRCRAFT, AND IN ENCLOSURES WHICH ARE SEA
13、LED OR PRIMARILY DEPENDENT ON RECIRCULATED ATMOSPHERE FOR COOLING.CONTINUOUS OPERATING TEMPERATURE RANGE: -20C (-4F) TO +105C (221F).CLASSIFICATION: THE HEAT SHRINKABLE SLEEVING SHALL BE FURNISHED IN THE FOLLOWING CLASSES, AS SPECIFIED:CLASS 1 - CROSSLINKEDCLASS 2 - NON-CROSSLINKEDCOLOR: CLASS 1 SHA
14、LL BE FURNISHED IN COLORS CONFORMING TO CLASS II OF MIL-STD-104. CLASS 2 SHALL BE FURNISHED IN CLEAR OR COLORS CONFORMING TO CLASS II OF MIL-STD-104 (SEE 1.2.2 AND 3.5.1.5).LONGITUDINAL CHANGE: CLASS 1, +1%; CLASS 2, -25%-10MILITARY PART NUMBER: THE MILITARY PART NUMBER SHALL CONSIST OF THE BASIC NU
15、MBER OF THIS SPECIFICATION SHEET AND DASH NUMBERS AS SHOWN BELOW:EXAMPLE: CLASS 2, STANDARD WALL, CLEAR, 0.750 INCH AS SUPPLIED ID SLEEVING SHALL BE IDENTIFIED AS M23053/2-209-C.400 Commonwealth Drive, Warrendale, PA 15096-0001INSULATION SLEEVING, ELECTRICAL, HEATSHRINKABLE, POLYVINYL CHLORIDE, FLEX
16、IBLE,CROSSLINKED AND NON-CROSSLINKEDAMS SPECIFICATIONAMS-I-23053/2SHEET 3 OF 6AMS-I-23053/2TABLE I. CONSTRUCTION DETAILS (INCHES) 1/400 Commonwealth Drive, Warrendale, PA 15096-0001INSULATION SLEEVING, ELECTRICAL, HEATSHRINKABLE, POLYVINYL CHLORIDE, FLEXIBLE,CROSSLINKED AND NON-CROSSLINKEDAMS SPECIF
17、ICATIONAMS-I-23053/2SHEET 4 OF 6AMS-I-23053/2TABLE I. CONSTRUCTION DETAILS (INCHES) 1/ (CONTINUED)UNRESTRICTED SHRINKAGE: TEST METHOD 4.6.5; CLASS 1, 200 2C (392 4F) FOR 5 MINUTES. CLASS 2, 150 2C (302 4F) FOR 5 MINUTES.400 Commonwealth Drive, Warrendale, PA 15096-0001INSULATION SLEEVING, ELECTRICAL
18、, HEATSHRINKABLE, POLYVINYL CHLORIDE, FLEXIBLE,CROSSLINKED AND NON-CROSSLINKEDAMS SPECIFICATIONAMS-I-23053/2SHEET 5 OF 6AMS-I-23053/2TABLE II. PHYSICAL PROPERTIES 1/400 Commonwealth Drive, Warrendale, PA 15096-0001INSULATION SLEEVING, ELECTRICAL, HEATSHRINKABLE, POLYVINYL CHLORIDE, FLEXIBLE,CROSSLIN
19、KED AND NON-CROSSLINKEDAMS SPECIFICATIONAMS-I-23053/2SHEET 6 OF 6AMS-I-23053/2TABLE II. PHYSICAL PROPERTIES 1/ (CONTINUED)SHELF LIFE CONDITIONS: MANUFACTURER SHALL CERTIFY TO CONFORMANCE TO 3.6 AFTER STORAGE AS FOLLOWS:INTENDED USE: HEAT SHRINKABLE PVC SLEEVING IS INTENDED FOR LIGHT DUTY HARNESSING OR WIRE BUNDLING.
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1