SAE ARP 674C-2001 Groove Design Metal O-Ring Gasket《金属O型密封圈凹槽设计》.pdf

1、_ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there

2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this p

3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497

4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/ARP674C AEROSPACE RECOMMENDED PRACTICE ARP674 REV. C Issued 1964-04 Revised 2001-

5、07 Reaffirmed 2012-10 Superseding ARP674B Groove Design, Metal O-Ring Gasket RATIONALE ARP674C has been reaffirmed to comply with the SAE five-year review policy. SAE ARP674C Page 2 of 11 SAE ARP674C Page 3 of 11 SAE ARP674C Page 4 of 11 SAE ARP674C Page 5 of 11 SAE ARP674C Page 6 of 11 SAE ARP674C Page 7 of 11 SAE ARP674C Page 8 of 11 SAE ARP674C Page 9 of 11 SAE ARP674C Page 10 of 11 SAE ARP674C Page 11 of 11