SAE AS 1959-1988 Insert - Ring Locked Fluid Connection Port Design Installation and Removal of《插件 锁紧环的液压连接孔的设计、安装和拆除》.pdf

1、_ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there

2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this p

3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497

4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AS1959 AEROSPACE STANDARD AS1959 Issued 1988-01 Reaffirmed 2012-11 Insert - Ring

5、Locked, Fluid Connection Port Design, Installation and Removal of RATIONALE AS1959 has been reaffirmed to comply with the SAE five-year review policy.SAE AS1959 Page 2 of 9 SAE AS1959 Page 3 of 9 SAE AS1959 Page 4 of 9 SAE AS1959 Page 5 of 9 SAE AS1959 Page 6 of 9 SAE AS1959 Page 7 of 9 SAE AS1959 Page 8 of 9 SAE AS1959 Page 9 of 9