SAE AS 22520 30-2015 CRIMPING TOOLS TERMINAL HAND OR POWER ACTUATED WIRE TERMINATION ACCESSORY HARDWARE FOR AS22520 28 AND AS22520 29 TOOLS.pdf

1、 AEROSPACE STANDARD CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION, ACCESSORY HARDWARE FOR AS22520/28 AND AS22520/29 TOOLSAS22520/30Copyright 2015 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in

2、 any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRE

3、SS: http:/www.sae.org ISSUED 2015-02THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C2 FEDERAL SUPPLY CLASS 5120 AS22520/30 SHEET 1 OF 3 PROCUREMENT SPECIFICATION: AS22520SAE Technical Standards Board Rules provide that: “This report ispublished by SAE toadvance thestate of technicalandengineering scienc

4、es. Theuse ofthisreport is entirelyvoluntary, andits applicability and suitability forany particularuse,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised,reaffirmed, stabili

5、zed, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS22520/30 RATIONALE AS22520/30 PERMITS THE CANCELLATION AND SUPERSESSION OF MIL-C-22520/30 WITH THIS DOCUMENT. IT

6、INCLUDES ENGINEERING POSITION LETTERS, MILITARY SPECIFICATION AMENDMENTS, AND MINOR TECHNICAL CHANGES REQUIRED TO REFLECT THE APPROVED QUALIFIED TOOLS. GOVERNMENT DOCUMENTATION REFERENCES CHANGES ARE REMOVED. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST O

7、F THIS DOCUMENT AND THE LATEST ISSUE OF AS22520. FIGURE 1 - M22520/30-01 BENCH MOUNT FIGURE 2 - M22520/30-02 FOOT VALVE COMPRESSED AIR INLET AND OUTLET - .125 NPT (LOCATION OPTIONAL AEROSPACE STANDARD AS22520/30 SHEET 2 OF 3 CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION, ACCESSO

8、RY HARDWARE FOR AS22520/28 AND AS22520/29 TOOLS REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS22520. 1. CONFIGURATION: ACCESSORY HARDWARE SHALL BE IN ACCORDANCE WITH FIGURE 1 AND 2. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES AND TOLERANCES ARE DECI

9、MALS .50. OUTLINE CONFIGURATION IS OPTIONAL WITHIN MAXIMUM DIMENSIONS SHOWN. BREAK ALL SHARP EDGES. 1.1 ACCESSORY HARDWARE SHALL BE DESIGNED TO BE USED WITH AS22520/28 AND AS22520/29 PNEUMATIC CRIMP TOOLS. 1.2 ADJUSTABLE TILT, HEIGHT, AND ROTATION MECHANISM SHALL HAVE A MINIMUM OF 90 THROUGHOUT A 36

10、0 ROTATION. BENCH MOUNT SHALL SECURE THE TOOL THROUGHOUT NORMAL USE (SEE THE TIGHTENING KNOB SHOWN IN FIGURE 1 AS EXAMPLE). 2. IDENTIFICATION MARKING AND COLOR: 2.1 ACCESSORY HARDWARE IDENTIFICATION LOCATION SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-130, STAMP (LETTERING HEIGHT IS .093 MIN AND WHIT

11、E FILL), LASER MARKED, OR WITH LABEL. HARDWARE ACCESSORY IDENTIFICATION SHALL INCLUDE MANUFACTURER NAME OR SYMBOL AND PART NUMBER, AND THE SAE PART NUMBER. 2.2 MARKING LOCATION AND ACCESSORY HARDWARE COLOR IS OPTIONAL. 2.3 ALL MARKING SHALL BE LEGIBLE AFTER ALL AS22520 PERFORMANCE REQUIREMENTS 2.4 O

12、THER UNSPECIFIED LABELS ARE PERMISSIBLE ON ACCESSORY HARDWARE. ALL LABELS SHALL STILL BE ATTACHED AFTER ALL AS22520 PERFORMANCE REQUIREMENTS. 3. MATERIAL: MATERIAL SHALL BE IN ACCORDANCE WITH AS22520. 4. PART NUMBER STRUCTURE (PIN) M22520/30 - 01 I I I I_ BENCH MOUNT HARDWARE (-01) I OR FOOT VALVE H

13、ARDWARE (-02) I_ DETAIL SPECIFICATION NUMBER QUALIFICATION: 1. VISUAL AND MECHANICAL INSPECTION ONLY. APPLICATION NOTES: 1. BENCH MOUNT HARDWARE IS USED TO SUPPORT AS22520/28 OR AS22520/29 PNEUMATIC CRIMP TOOLS. 2. FOOT VALVE IS USED TO PROVIDE AN ALTERNATE REMOTE CONTROL TO THE SELF-CONTAINED CONTR

14、OL MECHANISM ACTIVATED BY A HAND TRIGGER ON THE AS22520/28 OR AS22520/29 PNEUMATIC CRIMP TOOLS. SUPERSESSION INFORMATION: 1. AS22520/30 SUPERSEDES MIL-C-22520/30. PART NUMBERS REMAIN UNCHANGED. AEROSPACE STANDARD AS22520/30 SHEET 3 OF 3 CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINAT

15、ION, ACCESSORY HARDWARE FOR AS22520/28 AND AS22520/29 TOOLS SPECIFICATION NOTE: 1. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.