SAE AS 29600 23A-2015 CONNECTORS ELECTRICAL CIRCULAR MINIATURE COMPOSITE HIGH DENSITY QUICK COUPLING ENVIRONMENT RESISTANT CONTACTS SOCKET CRIMP REMOVABLE (FOR MIL-C-29600 SERIES B.pdf

1、 AEROSPACE STANDARD (R) CONTACTS, SOCKET, CRIMP REMOVABLE, CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, (FOR AS29600 SERIES B) AS29600/23Copyright 2015 SAE International All rights reserved. No part of this publication may be reproduced

2、, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776

3、-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 1998-01REAFFIRMED2003-08REVISED 2015-02THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.A FEDERAL SUPPLY CLASS 5935AS29600/23 SHEET 1 OF 3 REV. A PROCUREMENT SPECIFICATION: AS29600SAE Technical Standards Board Rules provi

4、de that: “This report ispublished by SAE toadvance thestate of technicalandengineering sciences. Theuse ofthisreport is entirelyvoluntary, andits applicability and suitability forany particularuse,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews ea

5、chtechnicalreport at least every five years at which time itmay berevised,reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS29600/23A RATIONALE

6、REVISION IS REQUIRED TO REMOVE ALL GOVERNMENT/WORD FOR WORD CONVERSION INFORMATION, TO CORRECT DIMENSIONAL ERROR IN TABLE 1 FOR DIMENSION “C” (BIN CODE 608), TO CORRECT ALL DOCUMENT REFERENCES, AND TO UPDATE DOCUMENT TO LATEST SAE FORMAT GUIDELINES. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE

7、 PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS29600 AND AS39029. FIGURE 1 - CONNECTOR CONFIGURATION AND DIMENSIONS AEROSPACE STANDARD AS29600/23 SHEET 2 OF 3 REV. A (R) CONTACTS, SOCKET, CRIMP REMOVABLE, CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIG

8、H DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, (FOR AS29600 SERIES B)TABLE 1 - FIGURE 1 DIMENSIONS BIN CODE A DIA. B DIA. C DIA. D MAX. DIA. E MIN. DIA. ONLY H DIA. L (REFERENCE) M 606 .0480 (1.219) .0465 (1.181) .0355 (0.9017) .0335 (0.8509) .0555 (1.410).0540 (1.372).055 (1.397) .0280 (0.7112).

9、022 (0.5588) .018 (0.4572) .937 (23.80) .445 (11.30) .425 (10.80) 607 .0615 (1.562) .0600 (1.524) .0450 (1.143) .0430 (1.092) .0760 (1.930).0745 (1.892).076 (1.930) .0415 (1.054) .027 (0.6858) .023 (0.5842) .395 (10.03) .375 (9.525) 608 .0925 (2.350) .0910 (2.311) .0645 (1.638) .0625 (1.588) .1080 (

10、2.743).1065 (2.705).108 (2.743) .0640 (1.626) .370 (9.398) .350 (8.890) 609 .1515 (3.848) .1500 (3.810) .1020 (2.591) .0980 (2.489) .1695 (4.305).1680 (4.267).169 (4.293) .0955 (2.426) .042 (1.067) .038 (0.9652) .954 (24.23) TABLE 1A - FIGURE 1 DIMENSIONS (CONTINUED) BIN CODE N P R S T U MAX. W (CHA

11、MFER) 606 .155 (3.937) .145 (3.683) .218 (5.537) .208 (5.283) .145 (3.683) .139 (3.531) .726 (18.44) .712 (18.08) .250 (6.350) .190 (4.826) .038 (0.9652) .006 (0.1524) .003 (0.0762) 607 .195 (4.953) .185 (4.699) .165 (4.191) .159 (4.039) .360 (9.144) .270 (6.858) .045 (1.143) .007 (0.1778) .004 (0.1

12、016) 608 .050 (1.270) .010 (0.2540) .006 (0.1524) 609 .232 (5.893) .216 (5.486) .245 (6.223) .235 (5.969) .196 (4.978) .190 (4.826) .716 (18.19) .712 (18.08) .360 (9.144) .250 (6.350) .012 (0.3048) .006 (0.1524) TABLE 2 - DESIGN CHARACTERISTICS BIN CODE COLOR BANDS MATING END SIZEWIRE BARREL SIZE 1S

13、T 2ND 3RD 606 BLUE BLACK BLUE 23 22 607 BLUE BLACK VIOLET 20 20 608 BLUE BLACK GRAY 16 16 609 BLUE BLACK WHITE 12 12 TABLE 3 - TOOLS WIRE BARREL SIZE BASIC CRIMPING TOOL POSITIONER INSTALLING TOOL REMOVAL TOOLS WIRED UNWIRED 22 M22520/2-01 M22520/2-16 M81969/16-04 M81969/16-04 M81969/30-01 20 M22520

14、/2-01 M22520/2-17 M81969/16-01 M81969/16-01 M81969/30-02 16 M22520/2-01 M22520/2-18 M81969/16-02 M81969/16-02 M81969/30-03 12 M22520/1-01 M22520/1-10 M81969/16-03 M81969/16-03 M81969/30-04 REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS29600 AND AS39029. 1. D

15、ESIGN: CONNECTORS SHALL BE DESIGNED IN ACCORDANCE WITH FIGURE 1 AND TABLES 1 AND 2. DIMENSIONS ARE IN INCHES AND APPLY AFTER PLATING. METRIC EQUIVALENTS ARE GIVEN FOR INFORMATION PURPOSES ONLY AND ARE BASED ON 1 INCH = 25.4 MILLIMETERS. 2. TOOLS: SEE TABLE 3. 3. MATING CONTACTS: AS29600/24. 4. MATER

16、IALS: MATERIAL: BASE-CONDUCTIVE COPPER ALLOY. PLATING IN ACCORDANCE WITH AS29600. TEMPERATURE: -65 TO +175 C. 5. MECHANICAL: DURABILITY: 1500 CYCLES. AEROSPACE STANDARD AS29600/23 SHEET 3 OF 3 REV. A (R) CONTACTS, SOCKET, CRIMP REMOVABLE, CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH

17、DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, (FOR AS29600 SERIES B)6. ENVIRONMENTAL: VIBRATION: THE VIBRATION REQUIREMENTS SHALL CONSIST OF THOSE TESTS SPECIFIED IN AS29600. THE CONTACT SAMPLE GROUP SHALL BE 12 CONTACTS, DIVIDED EQUALLY BETWEEN THE THREE SEPARATE VIBRATION TESTS OF AS29600. SHOCK

18、: THE SHOCK REQUIREMENTS SHALL CONSIST OF THOSE TESTS SPECIFIED IN AS29600. THE CONTACT SAMPLE GROUP SHALL BE DIVIDED IN HALF AND EACH GROUP SUBJECTED TO A SEPARATE SHOCK TEST. 7. QUALIFICATION: THE QUALIFICATION REQUIREMENTS SHALL CONSIST OF THE SAMPLE NUMBERS AND TESTS SPECIFIED IN AS39029 FOR TYP

19、E A CONTACTS WITH LOCALIZED FINISH. THE VIBRATION TEST GROUP SHALL CONSIST OF DOUBLE THE NUMBER OF SAMPLES SPECIFIED IN AS39029. FOR THOSE TESTS WHICH REQUIRE THE USE OF A CONNECTOR PAIR, EITHER A COMPOSITE OR METAL SHELL CONNECTOR PAIR MAY BE UTILIZED. CAUTION SHOULD BE USED IF EXCEEDING THE RATED

20、DURABILITY CYCLES OF A METAL SHELL CONNECTOR. FOR VIBRATION AND SHOCK TESTING, ACCESSORIES SHALL BE AS SPECIFIED IN AS29600. PERIODIC QUALIFICATION: IN ACCORDANCE WITH AS39029. QUALITY CONFORMANCE INSPECTION: THE QUALITY CONFORMANCE REQUIREMENTS SHALL CONSIST OF GROUPS A AND B INSPECTION AS SPECIFIE

21、D IN AS39029. 8. PART NUMBERS: SEE EXAMPLE PART NUMBER BELOW: M29600 /23 - 606 BASE SPECIFICATION DETAIL SHEET BIN CODE NUMBER APPLICATION NOTE: 1. THESE CONTACTS ARE SPECIFICALLY FOR USE IN AS29600 CONNECTORS. AS29600 DEFINES DETAIL SHEETS FOR ALL CONTACTS AND ACCESSORIES TO BE USED WITH THE AS2960

22、0 CONNECTORS. SPECIFICATION NOTE: 1. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.