SAE AS 3062C-1979 Bolts Screws and Studs Screw Thread Requirements《螺栓 螺杆和螺母 螺纹要求》.pdf

1、_ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there

2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this p

3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497

4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AS3062C AEROSPACE STANDARD AS3062 REV. C Issued 1970-03 Revised 1979-09 Reaffirme

5、d 2012-11 Superseding AS3062B Bolts, Screws and Studs, Screw Thread Requirements RATIONALE AS3062C has been reaffirmed to comply with the SAE five-year review policy.SAE AS3062C Page 2 of 18 SAE AS3062C Page 3 of 18 SAE AS3062C Page 4 of 18 SAE AS3062C Page 5 of 18 SAE AS3062C Page 6 of 18 SAE AS306

6、2C Page 7 of 18 SAE AS3062C Page 8 of 18 SAE AS3062C Page 9 of 18 SAE AS3062C Page 10 of 18 SAE AS3062C Page 11 of 18 SAE AS3062C Page 12 of 18 SAE AS3062C Page 13 of 18 SAE AS3062C Page 14 of 18 SAE AS3062C Page 15 of 18 SAE AS3062C Page 16 of 18 SAE AS3062C Page 17 of 18 SAE AS3062C Page 18 of 18