SAE AS 31001B-2014 CONNECTOR RECEPTACLE ELECTRIC WALL MOUNTING SOLDER CONTACTS AN TYPE《航空航天标准 AN型焊接触点壁式安装电插座连接器》.pdf

1、AEROSPACE STANDARD CONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE AS31001Copyright 2014 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, ph

2、otocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED2004-06REVISED2014-06THIR

3、D ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.BFEDERAL SUPPLY CLASS 5935 AS31001SHEET 1 OF 12REV. BPROCUREMENT SPECIFICATION: AS50151SAE Technical Standards Board Rules provide that: “This report is publishedbySAEtoadvance thestateoftechnical and engineeringsciences. The useofthis reportisentirely v

4、oluntary, and its applicabilityand suitability for any particularuse, includingany patent infringement arising therefrom, isthe soleresponsibility of the user.”SAE reviews each technical report at least every five years at whichtime it mayberevised, reaffirmed, stabilized, or cancelled. SAE invites

5、your writtencomments and suggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS31001BRATIONALE - REVISION IS REQUIRED TO CORRECT THE DIMENSIONAL TOLERANCE VALUE FOR DIMENSION S. - REVISION IS REQUIRED TO CORRECT THE APPL

6、ICATION NOTE 3 APPLICABLE SHELL SIZES. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS50151. CLASS A - SOLID SHELL CLASS C - PRESSURIZED FIGURE 1 - STYLE S (SOCKET INSERT) AEROSPACE STANDARD AS31001SHEET 2 OF 12REV

7、. BCONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE STYLE P (PIN INSERT) CLASS A - SOLID SHELL CLASS C - PRESSURIZEDFIGURE 2 - STYLE P (PIN INSERT) TABLE 1 - FIGURE 1 AND 2 DIMENSIONS SIZEACOUPLING THREADBMINUSABLETHREADD+.015-.000 IDIMAXINSERTDIAJJ 1/ +.031-.000 INSERTLOCATI

8、ON KTHICKNESS MOUNTING FLANGE LMAXOVERALL LENGTH M+.031-.000 MOUNTINGFLANGE LOCATION MAX MIN 8S 1/2 - 28 .375.370 .250 .562.156 .062 1.469 .56210S 5/8 - 24 .448 .320 1.531 10SL.448 12S 3/4 - 20 .557 1.688 12 .625 .750 2.062 .750 14S 7/8 - 20 .375 .682 .525 .562 1.688 .562 14 .625 .750 2.062 .750 16S

9、 1 - 20 .375 .807 .650 .562 1.688 .562 16.625 .750 2.062 .75018 1-1/8 - 18 .932 .770 .203 .094 20 1-1/4 - 18 1.058 .925 2.188 22 1-3/8 - 18 1.182 1.020 24 1-1/2 - 18 1.307 1.145 2.312 .812 28 1-3/4 - 18 1.526 1.365 32 2 - 18 1.776 1.615 .359 .125 2.438 .87536 2-1/4 - 16 1.995 1.830 40 2-1/2 - 16 2.2

10、45 2.045 44 2-3/4 - 16 2.495 2.300 2.562 48 3 - 16 2.745 2.550 1/ WHERE RESILIENT INSERTS ARE USED, “JJ” MAY BE .109 LESS THAN THAT INDICATED. AEROSPACE STANDARD AS31001SHEET 3 OF 12REV. BCONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE TABLE 1 - FIGURE 1 AND 2 DIMENSIONS (CO

11、NTINUED) SIZE NMAXO.D.O (REF) MOUNTING HOLEDIA P+.015 -.000 KEY HEIGHT R.005 ) - )MOUNTINGHOLESS.031 INCHES LENGTHSIDE T+.010 -.005 MOUNTINGBOLTHOLEDIA VTHREADWMIN USABLE THREADFOR INSERT ARRANGEMENTSEE DRAWING 8S .532 .562 .130 .594 .875 .120 1/2 - 28 .375 MIL-STD 1651 10S .656 .688 .165 .719 1.000

12、 10SL .782 .812 5/8 - 24 12S .224 .812 1.094 1214S .906 .938 .263 .906 1.188 3/4 - 20 1416S 1.032 1.062 .325 .969 1.281 7/8 - 20 1618 1.156 1.188 .385 1.062 1.375 1 - 20 20 1.282 1.312 .463 1.156 1.500 1-3/16 - 18 22 1.406 1.438 .510 1.250 1.625 24 1.532 1.562 .573 1.375 1.750 .147 1-7/16 - 18 28 1.

13、782 1.812 .683 1.562 2.000 32 2.032 2.062 .808 1.750 2.250 .173 1-3/4 - 18 .438 36 2.282 2.312 .915 1.938 2.500 2 - 18 .500 40 2.532 2.562 1.023 2.188 2.750 2-1/4 - 16 44 2.782 2.812 1.150 2.375 3.000 2-1/2 - 16 .562 48 3.032 3.062 1.275 2.625 3.250 3 - 16 .625 NOTES FOR CLASS A AND C: 1. SOCKET INS

14、ERTS OF HARD MATERIAL SHALL EXTEND .016 MAXIMUM BEYOND OR .032 MAXIMUM BELOW SHELL. SOCKET INSERT OF RESILIENT MATERIAL SHALL EXTEND .047 +.000/-.047 BEYOND SHELL. CLASS K - FIREWALL FIGURE 3 - STYLE S (SOCKET INSERT)AEROSPACE STANDARD AS31001SHEET 4 OF 12REV. BCONNECTOR, RECEPTACLE, ELECTRIC, WALL

15、MOUNTING, SOLDER CONTACTS, AN TYPE CLASS K - FIREWALL FIGURE 4 - STYLE P (PIN INSERT) TABLE 2 - FIGURE 3 AND 4 DIMENSIONS SIZEACOUPLING THREADBMINUSABLETHREADD+.015-.000 IDIMAXINSERTDIAJJ +.031-.000 INSERTLOCATION KMINTHICKNESSMOUNTINGFLANGE LMAXOVERALL LENGTH M+.031-.000 MOUNTING FLANGE LOCATION 8S

16、 1/2 - 28 .375.370 .250 .562.0622.188 .56210S 5/8 - 24 .448 .320 10SL.448 12S 3/4 - 20 .557 12 .625 .750 2.875 .750 14S 7/8 - 20 .375 .682 .525 .562 2.188 .562 14 .625 .750 2.875 .750 16S 1 - 20 .375 .807 .650 .562 2.188 .562 16.625 .750 2.875 .750 18 1-1/8 - 18 .932 .770 .07820 1-1/4 - 18 1.058 .92

17、5 22 1-3/8 - 18 1.182 1.020 24 1-1/2 - 18 1.307 1.145 3.125 .81228 1-3/4 - 18 1.526 1.365 32 2 - 18 1.776 1.615 .125 .875 36 2-1/4 - 16 1.995 1.830 40 2-1/2 - 16 2.245 2.045 AEROSPACE STANDARD AS31001SHEET 5 OF 12REV. BCONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE TABLE 2

18、- FIGURE 3 AND 4 DIMENSIONS (CONTINUED) SIZENMAXO.D. O (REF) MOUNTING HOLE DIAP+.015-.000 KEY HEIGHT R.005 ) - )MOUNTINGHOLES S.031INCHESLENGTHSIDET+.010-.005 MOUNTINGBOLT HOLE DIAVTHREADWMINUSABLETHREADFOR INSERT ARRANGEMENT SEE DRAWING 8S .532 .562 .130 .594 .875 .1501/2 - 28 .375MIL-STD 1651 10S

19、.656 .688 .165 .719 1.000 10SL.782 .812 5/8 - 24 12S .224 .812 1.094 1214S .906 .938 .263 .906 1.188 3/4 - 20 1416S 1.032 1.062 .325 .969 1.281 7/8 - 20 1618 1.156 1.188 .385 1.062 1.375 1 - 20 20 1.344 1.375 .463 1.156 1.500 1-3/16 - 1822 1.406 1.438 .510 1.250 1.625 24 1.625 1.688 .573 1.375 1.750

20、 .177 1-7/16 - 1828 1.782 1.812 .683 1.562 2.000 32 2.032 2.062 .808 1.750 2.250 .2091-3/4 - 18 .438 36 2.282 2.312 .915 1.938 2.500 2 - 18 .50040 2.532 2.562 1.023 2.188 2.750 2-1/4 - 16 CLASS E - ENVIRONMENT RESISTANT FIGURE 5 - STYLE P (PIN INSERT) AEROSPACE STANDARD AS31001SHEET 6 OF 12REV. BCON

21、NECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE CLASS E - ENVIRONMENT RESISTANT FIGURE 6 - STYLE S (SOCKET INSERT) TABLE 3 - FIGURE 5 AND 6 DIMENSIONSSIZEACOUPLING THREADBMINUSABLETHREADD+.015-.000 IDIMAXINSERTDIAJ+.031-.000 INT SHELLSHLDRJJ .031 INSERTLOCATION KTHICKNESS MOUNT

22、ING FLANGE LMAX 1/ OVERALLLENGTH M+.031-.000 MOUNTINGFLANGE LOCATION MAX MIN 8S 1/2 - 28 .375.370 .250 .562 .484 .156 .078 2.250 .56210S 5/8 - 24 .448 .320 10SL.448 12S 3/4 - 20 .557 12 .625 .750 .672 2.625 .750 14S 7/8 - 20 .375 .682 .525 .562 .484 2.250 .562 14 .625 .750 .672 2.625 .750 16S 1 - 20

23、 .375 .807 .650 .562 .484 2.250 .562 16.625 .750 .672 2.625 .75018 1-1/8 - 18 .932 .770 .203 .094 2.688 20 1-1/4 - 18 1.058 .925 2.750 22 1-3/8 - 18 1.182 1.020 24 1-1/2 - 18 1.307 1.145 2.969 .81228 1-3/4 - 18 1.526 1.365 3.031 32 2 - 18 1.776 1.615 .359 .125 .875 36 2-1/4 - 16 1.995 1.830 3.281 40

24、 2-1/2 - 16 2.245 2.045 3.500 1/ ADD .375 FOR SIZE “0” CONTACTS. AEROSPACE STANDARD AS31001SHEET 7 OF 12REV. BCONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE TABLE 3 - FIGURE 5 AND 6 DIMENSIONS (CONTINUED)SIZE NMAXO.D.O (REF) MOUNTING HOLEDIA P+.015 -.000 KEY HEIGHT R.005 )

25、- )MOUNTING HOLESS.031 INCHES LENGTHSIDE T+.010 -.005 MOUNTINGBOLT HOLE DIA XMIN CABLECLEARANCEZMAXACROSSSEAL ASSEMBLY FOR INSERT ARRANGEMENTSEE DRAWING 8S .532 .562 .130 .594 .875 .120 .172 1.046 MIL-STD 1651 10S .656 .688 .165 .719 1.000 10SL .782 .812 .281 1.125 12S .224 .812 1.094 1214S .906 .93

26、8 .263 .906 1.188 .406 1.343 1416S 1.032 1.062 .325 .969 1.281 .500 1.484 1618 1.156 1.188 .385 1.062 1.375 .531 1.609 20 1.282 1.312 .463 1.156 1.500 .656 1.890 22 1.406 1.438 .510 1.250 1.625 .750 24 1.532 1.562 .573 1.375 1.750 .147 .781 2.170 28 1.782 1.812 .683 1.562 2.000 .922 32 2.032 2.062 .

27、808 1.750 2.250 .173 1.156 2.656 36 2.282 2.312 . 915 1.838 2.500 1.250 2.922 40 2.532 2.562 1.023 2.188 2.750 1.562 3.531 CLASS R - ENVIRONMENT RESISTANT FIGURE 7 - STYLE P (PIN INSERT) AEROSPACE STANDARD AS31001SHEET 8 OF 12REV. BCONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN

28、TYPE CLASS R - ENVIRONMENT RESISTANT FIGURE 8 - STYLE S (SOCKET INSERT) TABLE 4 - FIGURE 7 AND 8 DIMENSIONS SIZEACOUPLING THREADBMINUSABLETHREADD+.015-.000 IDIMAXINSERTDIAJ+.031-.000 INT SHELLSHLDRJJ .031 INSERTLOCATION KTHICKNESS MOUNTING FLANGE LMAX 1/ OVERALLLENGTH M+.031-.000 MOUNTINGFLANGE LOCA

29、TION MAX MIN 8S 1/2 - 28 .375.370 .250 .562 .484 .156 .076 1.838 .56210S 5/8 - 24 .448 .320 10SL.448 12S 3/4 - 20 .557 12 .625 .750 .672 2.181 .750 14S 7/8 - 20 .375 .682 .525 .562 .484 1.838 .562 14 .625 .750 .672 2.181 .750 16S 1 - 20 .375 .807 .650 .562 .484 1.838 .562 16.625 .750 .672 2.181 .750

30、18 1-1/8 - 18 .932 .770 .203 .094 2.281 20 1-1/4 - 18 1.058 .925 22 1-3/8 - 18 1.182 1.020 24 1-1/2 - 18 1.307 1.145 .81228 1-3/4 - 18 1.526 1.365 32 2 - 18 1.776 1.615 .359 .125 2.322 .875 36 2-1/4 - 16 1.995 1.930 40 2-1/2 - 16 2.245 2.045 1/ ADD .375 FOR SIZE “0” CONTACTS.AEROSPACE STANDARD AS310

31、01SHEET 9 OF 12REV. BCONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE TABLE 4 - FIGURE 7 AND 8 DIMENSIONS (CONTINUED) SIZE NMAXO.D.O (REF) MOUNTING HOLEDIA P+.015 -.000 KEY HEIGHT R.005 ) - )MOUNTINGHOLESS.031 INCHES LENGTHSIDE T+.010 -.005 MOUNTINGBOLT HOLE DIA XMIN CABLECLE

32、ARANCEZMAXACROSSSEAL ASSEMBLY FOR INSERT ARRANGEMENTSEE DRAWING 8S .532 .562 .130 .594 .875 .120 .172 1.046 MIL-STD 1651 10S .656 .688 .165 .719 1.000 10SL .782 .812 .281 1.125 12S .224 .812 1.094 1214S .906 .938 .263 .906 1.188 .406 1.343 1416S 1.032 1.062 .325 .969 1.281 .500 1.484 1618 1.156 1.18

33、8 .385 1.062 1.375 .531 1.609 20 1.282 1.312 .463 1.156 1.500 .656 1.890 22 1.406 1.438 .510 1.250 1.625 .750 24 1.532 1.562 .573 1.375 1.750 .147 .781 2.170 28 1.782 1.812 .683 1.562 2.000 .922 32 2.032 2.062 .808 1.750 2.250 .173 1.156 2.656 36 2.282 2.312 .915 1.938 2.500 1.250 2.922 40 2.532 2.5

34、62 1.023 2.188 2.750 1.562 3.328 CLASS F - ENVIRONMENT RESISTANT FIGURE 9 - STYLE P (PIN INSERT) AEROSPACE STANDARD AS31001SHEET 10 OF 12REV. BCONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE CLASS F - ENVIRONMENT RESISTANT FIGURE 10 - STYLE S (SOCKET INSERT) TABLE 5 - FIGURE

35、 9 AND 10 DIMENSIONS SIZEACOUPLING THREADBMINUSABLETHREADD+.015-.000 IDIMAXINSERTDIAJ+.031-.000 INT SHELLSHLDRJJ .031 INSERTLOCATION KTHICKNESS MOUNTING FLANGE LMAX 1/ OVERALLLENGTH M+.031-.000 MOUNTINGFLANGE LOCATION MAX MIN 8S 1/2 - 28 .375.370 .250 .562 .484 .156 .078 2.250 .56210S 5/8 - 24 .448

36、.320 10SL.448 12S 3/4 - 20 .557 12 .625 .750 .672 2.625 .750 14S 7/8 - 20 .375 .682 .525 .562 .484 2.250 .562 14 .625 .750 .672 2.625 .750 16S 1 - 20 .375 .807 .650 .562 .484 2.250 .562 16.625 .750 .672 2.625 .75018 1-1/8 - 18 .932 .770 .203 .094 2.688 20 1-1/4 - 18 1.058 .925 2.750 22 1-3/8 - 18 1.

37、182 1.020 24 1-1/2 - 18 1.307 1.145 2.969 .81228 1-3/4 - 18 1.526 1.365 3.031 32 2 - 18 1.776 1.615 .359 .125 .875 36 2-1/4 - 16 1.995 1.830 3.281 40 2-1/2 - 16 2.245 2.045 3.500 1/ ADD .375 FOR SIZE “0” CONTACTS. AEROSPACE STANDARD AS31001SHEET 11 OF 12REV. BCONNECTOR, RECEPTACLE, ELECTRIC, WALL MO

38、UNTING, SOLDER CONTACTS, AN TYPE TABLE 5 - FIGURE 9 AND 10 DIMENSIONS (CONTINUED) SIZE NMAXO.D.O (REF) MOUNTING HOLEDIA P+.015 -.000 KEY HEIGHT R.005 ) - )MOUNTINGHOLESS.031 INCHES LENGTHSIDE NNMAXCLOSEDT+.010 -.005 MOUNTING HOLEDIA XMIN CABLECLEARANCEZMAXACROSSCLAMPFOR INSERT ARRANGEMENTSEE DRAWING

39、 8S .532 .562 .130 .594 .875 .200 .120 .172 1.046 MIL-STD 1651 10S .656 .688 .165 .719 1.000 10SL .782 .812 .281 1.125 12S .224 .812 1.094 1214S .906 .938 .263 .906 1.188 .312 .406 1.343 1416S 1.032 1.062 .325 .969 1.281 .360 .500 1.484 1618 1.156 1.188 .385 1.062 1.375 .422 .531 1.609 20 1.282 1.31

40、2 .463 1.156 1.500 .531 .656 1.890 22 1.406 1.438 .510 1.250 1.625 .740 24 1.532 1.562 .573 1.375 1.750 .594 .147 .781 2.170 28 1.782 1.812 .683 1.562 2.000 .922 32 2.032 2.062 .808 1.750 2.250 .790 .173 1.156 2.656 36 2.282 2.312 .915 1.938 2.500 1.250 2.922 40 2.532 2.562 1.023 2.188 2.750 1.100 1

41、.562 3.531 REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS50151. 1. DESIGN: CONNECTORS SHALL BE DESIGNED IN ACCORDANCE WITH FIGURES 1 THROUGH 10 AND TABLES 1 THROUGH 5. DIMENSIONS ARE IN INCHES. UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE .016 INCHES. PART NUM

42、BER EXAMPLE: MS3100 E 8S 1 P Y BASIC PART NUMBERCLASSSIZEINSERT ARRANGEMENT NUMBER STYLE (P OR S) ALTERNATE INSERT POSITION (W, X, Y OR Z) LEAVE BLANK FOR NORMAL POSITION APPLICATION NOTES: CLASS A AND C: 1. CONNECTORS MS3100A/C REPLACE AND ARE INTERCHANGEABLE WITH CORRESPONDING AN3100A/C CONNECTORS

43、. 2. SIZES 8S THROUGH 40 OF CLASSES A AND C ARE CANCELLED. FOR REPLACEMENT PURPOSES, USE CLASS F FOR SADDLE CLAMP WITH GROMMET SEAL OR CLASS R FOR GROMMET SEAL WITHOUT SADDLE CLAMP. MS3450W WITH THE APPROPRIATE AS85049/31 BACKSHELL IS RECOMMENDED FOR NEW DESIGN. MS3400 IS RECOMMENDED FOR SHIPBOARD J

44、ACKETED CABLES. 3. SIZES 44 AND 48 OF CLASSES A AND C ARE NOT RECOMMENDED FOR NEW DESIGN. AEROSPACE STANDARD AS31001SHEET 12 OF 12REV. BCONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE CLASS K: 1. CLASS K IS NOT RECOMMENDED FOR NEW DESIGN, USE MS3450K WITH APPROPRIATE AS85049

45、/31 BACKSHELL. MS3400 IS RECOMMENDED FOR SHIPBOARD JACKETED CABLES. 2. CONNECTORS MS3100K REPLACE AND ARE INTERCHANGEABLE WITH CORRESPONDING AN3100K CONNECTORS. CLASS E: 1. CLASS E IS CANCELLED AFTER JAN 1991. MS3100R SHOULD BE USED FOR REPLACEMENT OF MS3100E WITHOUT SADDLE CLAMP, MS3100F SHOULD BE

46、USED FOR REPLACEMENT OF MS3100E WITH SADDLE CLAMP. MS3450W WITH THE APPROPRIATE AS85049/31 BACKSHELL IS RECOMMENDED FOR NEW DESIGN. MS3400 IS RECOMMENDED FOR JACKETED SHIPBOARD CABLES. 2. CONNECTORS MS3100E REPLACE AND ARE INTERCHANGEABLE WITH CORRESPONDING AN3100G CONNECTORS. CLASS R: 1. CLASS R IS

47、 NOT RECOMMENDED FOR NEW DESIGN, USE MS3450W WITH APPROPRIATE AS85049/31 BACKSHELL. MS3400 IS RECOMMENDED FOR SHIPBOARD JACKETED CABLES. 2. CONNECTORS MS3100R REPLACE AND ARE INTERCHANGEABLE WITH CORRESPONDING MS3100C AND AN3100E CONNECTORS WITH SADDLE TYPE CABLE CLAMP. CLASS F: 1. CLASS F IS NOT RE

48、COMMENDED FOR NEW DESIGN, USE MS3450W WITH APPROPRIATE AS85049/52 BACKSHELL. MS3400 IS RECOMMENDED FOR SHIPBOARD JACKETED CABLES. SPECIFICATION NOTES: 1. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.