1、AEROSPACE STANDARD (R) BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .3125-24 UNJF-3A AS3116Copyright 2014 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, e
2、lectronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED
3、 1979-07REAFFIRMED 2006-05 REVISED 2014-03THIRD ANGLE PROJECTION CUSTODIAN: E-25 REV.AFEDERAL SUPPLY CLASS 5306 AS3116SHEET 1 OF 3REV. APROCUREMENT SPECIFICATION: AS7477SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering scie
4、nces. Theuse ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised, reaffirmed, s
5、tabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS3116ARATIONALE FIGURE REDRAWN, THREAD SPEC UPDATED, OPTIONAL SHAPE FOR LIGHTENING HOLE ADDED TABLE RETYPED
6、TO REMOVE DUAL DIMENSIONING, NOTES BROUGHT UP TO DATE .561 MIN.502.492KL.00332250.280.29032CHAMFER 30 TO .500A.3125-24 UNJF-3APER AS8879 MAXIMUM 2 INCOMPLETETHREADS (SEE NOTE 4) .510 MAX .460 MINBEARING SURFACEVIEW A ENLARGEDSECTION THRUTHREAD PROFILE32MARK PART NUMBERAND MANUFACTURERSIDENTIFICATION
7、 PERAS478 CLASS AR.015.025BAB.003 x L.006 AOPPOSITE SIDE OPTIONAL.020 CDC.201.281D.083 .188 TODEPTH SHOWN45 10-+ .252G.016SHAPE IN THISAREA OPTIONAL.105.015 B6 HOLESCSK 90 TO .100 .070 THRUSHAPE AT BOTTOMOPTIONAL6 x 60FIGURE 1 AEROSPACE STANDARD AS3116SHEET 2 OF 3REV. A(R) BOLT, MACHINE - HEXAGON HE
8、AD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .3125-24 UNJF-3A TABLE 1 - DIMENSIONS PART NUMBER /1/ L G MIN K MAx APPROX MASSLB/100 AS3116 -13 1.062 .044 .188 3.43 AS3116 -14 1.125 .107 .250 3.54 AS3116 -15 1.188 .170 .312 3.66 AS3116 -16 1.250 .232 .375 3.77 AS3116 -17 1.312 .295 .438 3.88 AS
9、3116 -18 1.375 .357 .500 4.00 AS3116 -19 1.438 .420 .562 4.11 AS3116 -20 1.500 .482 .625 4.23 AS3116 -21 1.562 .544 .688 4.34 AS3116 -22 1.625 .607 .750 4.46 AS3116 -23 1.688 .670 .812 4.57 AS3116 -24 1.750 .732 .875 4.69 AS3116 -25 1.812 .794 .938 4.80 AS3116 -26 1.875 .857 1.000 4.91 AS3116 -27 1.
10、938 .920 1.062 5.03 AS3116 -28 2.000 .982 1.125 5.14 AS3116 -29 2.125 1.107 1.250 5.37 AS3116 -30 2.250 1.232 1.375 5.60 AS3116 -31 2.375 1.375 1.500 5.83 AS3116 -32 2.500 1.482 1.625 6.06 AS3116 -33 2.625 1.607 1.750 6.29 AS3116 -34 2.750 1.732 1.875 6.52 AS3116 -35 2.875 1.857 2.000 6.75 AS3116 -3
11、6 3.000 1.982 2.125 6.97 AS3116 -37 3.125 2.107 2.250 7.20 AS3116 -38 3.250 2.232 2.375 7.43 AS3116 -39 3.375 2.357 2.500 7.66 AS3116 -40 3.500 2.482 2.625 7.89 AS3116 -41 3.625 2.607 2.750 8.12 AS3116 -42 3.750 2.732 2.875 8.35 AS3116 -43 3.875 2.857 3.000 8.58 AS3116 -44 4.000 2.982 3.125 8.81 AS3
12、116 -45 4.125 3.107 3.250 9.03 AS3116 -46 4.250 3.232 3.375 9.26 AS3116 -47 4.375 3.357 3.500 9.49 AS3116 -48 4.500 3.482 3.625 9.72 AS3116 -49 4.625 3.607 3.750 9.95 AS3116 -50 4.750 3.732 3.875 10.18 AS3116 -51 4.875 3.857 4.000 10.41 AS3116 -52 5.000 3.982 4.125 10.64 AS3116 -53 5.125 4.107 4.250
13、 10.87 AS3116 -54 5.250 4.232 4.375 11.09 AS3116 -55 5.375 4.357 4.500 11.32 AS3116 -56 5.500 4.482 4.625 11.55 AS3116 -57 5.625 4.607 4.750 11.78 AS3116 -58 5.750 4.732 4.875 12.01 AS3116 -59 5.875 4.857 5.000 12.24 AS3116 -60 6.000 4.982 5.125 12.47 AEROSPACE STANDARD AS3116SHEET 3 OF 3REV. A(R) B
14、OLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .3125-24 UNJF-3A 1. FOR SHORT BOLTS THREADED TO HEAD SEE AS9585. 2. FOR PART NUMBERS AS3116-13 THRU AS3116-17 DATUM A SHALL REPLACE DATUM B. 3. MATERIAL: CORROSION RESISTANT STEEL AMS5731. 4. MANUFACTURING SPECIFICATION: AS
15、7477. 5. FLUORESCENT PENETRANT INSPECTION PER ASTM E1417/E1417M TYPE 1. SENSITY LEVEL 2 MIN. 6. SURFACE TEXTURE: SYMBOLS PER ASME Y14.36M. REQUIREMENTS PER ASME B46.1. UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 125 MICROINCHES Ra. 7. BREAK SHARP EDGES .003 TO .015 UNLESS OTHERWISE SPECIFIED. 8. DIME
16、NSIONING AND TOLERANCING PER ANSI Y14.5M-1982 (ASME PUBLICATION). 9. DIMENSIONS IN INCHES. UNLESS OTHERWISE SPECIFIED, TOLERANCES: LINEAR DIMENSIONS .010, ANGULAR DIMENSIONS 5. 10. DO NOT USE UNASSIGNED PART NUMBERS. 11. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER
17、IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY. AS AND AMS ARE SAE INTERNATIONAL PUBLICATIONS. ASME IS AN AMERICAN SOCIETY OF MECHANICAL ENGINEERS PUBLICATION. ASTM IS AN ASTM INTERNATIONAL PUBLICATION.
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1