SAE AS 34041B-2012 CONNECTORS RECEPTACLE ELECTRIC JAM NUT MOUNTING FRONT RELEASE CRIMP CONTACT AN TYPE《AN型挤压接头安全螺母安装式插座连接器》.pdf

1、 AEROSPACE STANDARD CONNECTORS, RECEPTACLE, ELECTRIC, JAM NUT MOUNTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE AS34041Copyright 2017 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electron

2、ic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED1998-01

3、STABILIZED 2011-07REVISED2012-01REAFFIRMED 2017-03THIRD ANGLE PROJECTION CUSTODIAN: AE-8C1 REV.B FEDERAL SUPPLY CLASS 5935 AS34041 SHEET 1 OF 4 REV. B PROCUREMENT SPECIFICATION: AS50151 SAE Technical Standards BoardRules providethat:“This reportis publishedby SAE to advance thestateoftechnical anden

4、gineering sciences. The useofthis reportisentirely voluntary, and its applicability and suitability forany particularuse, includingany patent infringement arising therefrom, is thesole responsibility of theuser.” SAE reviews eachtechnical reportatleastevery five years at whichtime it may berevised,

5、reaffirmed, stabilized, or cancelled. SAEinvites your written comments and suggestions. SAE values your input. To provide feedback on this Technical Report, please visit http:/standards.sae.org/AS34041B RATIONALE AS34041B HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. THE REQUIR

6、EMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION SHEET AND THE LATEST ISSUE OF SAE AS50151. FIGURE 1 CONNECTOR CONFIGUATIONS (CLASSES D, L, U & W ENVIRONMENT RESISTANT) AEROSPACE STANDARD AS34041 SHEET 2 OF 4 REV. B CONNECTORS, RECEPTACLE, ELECTRIC, JAM NUT MOUNT

7、ING, FRONT RELEASE, CRIMP CONTACT, AN TYPE TABLE 1 - DIMENSIONS SIZE L MAX. M .005 N + .000 - .005 O + .015 - .000 S .005 T .010 FLATS Z .005 SIZE 16 & 12 CONTACTS SIZE 8 , 4 & 0 CONTACTS 8S 2.031 N/A .720 .500 .505 1.072 .865 .326 10S .625 .630 1.193 .990 .385 10SL .625 .630 1.193 .990 .385 12S .75

8、0 .755 1.317 1.050 .448 12 2.125 .966 .750 .755 1.317 1.050 .448 14S 2.031 .720 .875 .880 1.443 1.175 .510 14 2.125 .966 .875 .880 1.443 1.175 .510 16S 2.031 .720 1.000 1.005 1.567 1.300 .573 16 2.125 2.500 .966 1.000 1.005 1.567 1.300 .573 18 1.125 1.130 1.693 1.425 .635 20 1.250 1.255 1.817 1.550

9、.698 22 1.375 1.380 1.943 1.550 .760 24 1.500 1.505 2.067 1.800 .823 28 1.750 1.755 2.317 1.925 .948 32 2.000 2.005 2.567 2.175 1.073 36 2.250 2.255 2.817 2.550 1.198 40 2.500 2.505 3.061 2.800 1.323 44 2.750 2.755 3.311 3.050 1.448 48 3.000 3.005 3.561 3.300 1.573 AEROSPACE STANDARD AS34041 SHEET 3

10、 OF 4 REV. B CONNECTORS, RECEPTACLE, ELECTRIC, JAM NUT MOUNTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE TABLE 1 DIMENSIONS (CONTINUED) REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS SPECIFICATION AND THE LATEST ISSUE OF AS50151. 1. DESIGN: CONNECTORS SHALL BE DESIGNED IN ACCORDANCE WITH FIGURE

11、1 AND TABLE 1. DIMENSIONS ARE IN INCHES. UNLESS OTHERWISE SPECIFIED, TOLERANCES: DECIMALS .016. DIMENSIONS AND TOLERANCING SHALL BE IN ACCORDANCE WITH ANSI/ASME Y14.5M-1994. AS50151 FRONT AND REAR RELEASE CRIMP CONTACT CONNECTORS AND SOLDER CONTACT CONNECTORS ARE INTERMATEABLE. UNLESS OTHERWISE SHOW

12、N, CORRESPONDING FEATURES OF PIN AND SOCKET CONTACT CONNECTORS ARE IDENTICAL. 2. FOR INSERT ARRANGEMENTS SEE MIL-STD-1651. SIZE DD .008 O RING PROJECTION O RING SIZE AS568 NO. MS3186 DASH # (REF) 8S .020 -020 -25, -26, -27 10S -021 -31, -32, -33 10SL -021 -31, -32, -33 12S -023 -37, -38, -39 12 -023

13、 -37, -38, -39 14S -026 -40, -41, -42 14 -026 -40, -41, -42 16S -028 -43, -44, -45 16 -028 -43, -44, -45 18 -029 -46, -47, -48 20 -030 -49, -50, -51 22 .026 -131 -52, -53, -54 24 -133 -55, -56, -57 28 -137 -61, -62, -63 32 -141 -64, -65, -66 36 -145 -67, -68, -69 40 -149 -70, -71, -72 44 -151 -73, -

14、74, -75 48 -152 -76, -77, -78 AEROSPACE STANDARD AS34041 SHEET 4 OF 4 REV. B CONNECTORS, RECEPTACLE, ELECTRIC, JAM NUT MOUNTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE 3. THE PART NUMBERS SHALL BE AS SHOWN IN THE EXAMPLE BELOW: NOTES: NOTICE THIS DOCUMENT REFERENCES A PART WHICH CONTAINS CADMIUM AS A

15、 PLATING MATERIAL. CONSULT LOCAL OFFICIALS IF YOU HAVE QUESTIONS CONCERNING CADMIUMS USE. SPECIFICATION NOTES: A CHANGE BAR (|) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THI

16、S DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY. APPLICATION NOTES: 1. AS34041 CLASSES L, U AND W A

17、RE NOT RECOMMENDED FOR NEW DESIGN AND ARE NO LONGER RECOMMENDED FOR USE, EXCEPT FOR REPLACEMENT PURPOSES. 2. AS34041 SUPERSEDES MS3404. BASIC PART NO. CLASS D, L,U,W MATERIAL DESIGNATOR S-STAINLESS STEEL. LEAVE BLANK FOR ALUMINUM ALLOY SHELL SIZE INSERT ARRANGEMENT CONTACT DESIGNATOR ALTERNATE INSERT POSITION W, X, Y OR Z. LEAVE BLANK FOR NORMAL POSITION MS3404 D 28 21 P X