SAE AS 3659-2007 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED CLOSE TOLERANCE SHANK COBALT-NICKEL ALLOY UNS R30159 260 KSI MIN《UNS R30159、260 KSI MIN钻孔紧公差柄双六角延展带垫圈头的镍.pdf

1、 AEROSPACE STANDARD BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK,COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN AS3659Copyright 2014 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted,

2、 in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB AD

3、DRESS: http:/www.sae.org ISSUED 2007-10REAFFIRMED2014-04THIRD ANGLE PROJECTION CUSTODIAN: E-25 FEDERAL SUPPLY CLASS 5306 AS3659 SHEET 1 OF 12 PROCUREMENT SPECIFICATION: NONESAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineerings

4、ciences.The useofthis reportisentirelyvoluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised,reaffirmed, sta

5、bilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS3659 RATIONALE AS3659 HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. ATHREAD RUNOUTPER A

6、 3062S25025032NMLCHAMFER 28 - 32TO GOOTOL AD/1 .002 Z- Y -CSEE NOTE 1TOL AC YTOL AC Y250U05O O- VVIEW ABWRENCHING CONFIGURATIONPER AS870-XX (SEE TABLE 1A)FOR THIS DISTANCEEMARK PART NUMBER ANDMANUFACTURERS IDENTIFICATION PER AS 478 CLASS A EXCEPTEDGE DISTANCE REQUIREMENTS WAIVED250R .015MINF MINBEAR

7、ING SURFACEHKTSECTION THRUTHREAD PROFILE32RAD R32G4 x 45OPTHREAD DPER AS8879- Z - W -J THRU CSK 85 - 95 TO AH - 4 HOLESOOTOL AG M U W M45APPROXO.001 M U Y MTHD MAJOR DIA.35 MIN TO ROOT OF DOUBLE HEXAGON0AJSHAPE OPTIONAL IN THIS AREA- U -TOL AE YABFIGURE 1 - BOLT AEROSPACE STANDARD AS3659 SHEET 2 OF

8、12 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 1A - DASH NUMBERS AND DIMENSIONS B - F NOMINAL THREAD D B DASH NO. DESIGNATION MODIFIED MAJOR DIA. AS870 DASH NO. NOMINAL SIZE C E F MIN -3 -4 -5 -6 -7 -8 -9 -10

9、 -12 -14 -16 .1900 - 32 UNJF - 3A MOD .2500 - 28 UNJF - 3A MOD .3125 - 24 UNJF - 3A MOD .3750 - 24 UNJF - 3A MOD .4375 - 20 UNJF - 3A MOD .5000 - 20 UNJF - 3A MOD .5625 - 18 UNJF - 3A MOD .6250 - 18 UNJF - 3A MOD .7500 - 16 UNJF - 3A MOD .8750 - 14 UNJF - 3A MOD 1.0000 - 12 UNJF - 3A MOD .1840 - .18

10、75 .2435 - .2475 .3053 - .3100 .3678 - .3725 .4294 - .4350 .4919 - .4975 .5538 - .5600 .6163 - .6225 .7406 - .7475 .8647 - .8725 .9886 - .9975 -08 -10 -12 -14 -16 -18 -20 -22 -26 -30 -34 .2500 .3125 .3750 .4375 .5000 .5625 .6250 .6875 .8125 .9375 1.0625 .1885 - .1895 .2485 - .2495 .3110 - .3120 .373

11、5 - .3745 .4360 - .4370 .4985 - .4995 .5610 - .5620 .6235 - .6245 .7485 - .7495 .8735 - .8745 .9985 - .9995 .365 - .385 .455 - .475 .570 - .590 .686 - .706 .802 - .822 .917 - .937 1.032 - 1.052 1.148 - 1.168 1.379 - 1.399 1.610 - 1.630 1.841 - 1.861 .335 .425 .540 .656 .772 .887 1.002 1.118 1.349 1.

12、580 1.811 TABLE 1B - DASH NUMBERS AND DIMENSIONS G - V & AJ DASH NO. G H MIN J K P R T MIN U V AJ MAX -3 -4 -5 -6 -7 -8 -9 -10 -12 -14 -16 .240 - .260 .302 - .322 .365 - .385 .428.- .448 .490 - .510 .552 - .572 .615 - .635 .677 - .697 .802 - .822 .927 - .947 1.052 - 1.072 .020 .026 .035 .044 .053 .0

13、62 .071 .080 .098 .116 .134 .042 - .052 .060 - .070 .060 - .080 .060 - .080 .060 - .080 .060 - .080 .060 - .080 .060 - .080 .060 - .080 .090 - .110 .090 - .110 .248 - .268 .293 - .313 .354 - .374 .405 - .425 .462 - .482 .510 - .530 .558 - .578 .635 - .655 .735 - .755 .875 - .895 .975 - .995 .188 .22

14、9 .285 .335 .392 .440 .488 .525 .620 .715 .790 .015 - .025 .020 - .030 .026 - .036 .033 - .043 .039 - .049 .045 - .055 .051 - .061 .058 - .068 .070 - .080 .083 - .093 .095 - .105 .122 .144 .166 .188 .210 .232 .254 .336 .371 .442 .512 .114 - .134 .150 - .170 .188 - .208 .225 - .245 .262 - .282 .300 -

15、 .320 . .338 - 358 .375 - .395 .450 - .470 .525 - .545 .600 - .620 .090 - .110 .140 - .160 .196 - .216 .250 - .270 .300 - .320 .360 - .380 .430 - .450 .490 - .510 .560 - .580 .640 - .660 .730 - .750 .154 .199 .247 .294 .340 .389 .440 .488 .576 .665 .756 TABLE 1C - DASH NUMBERS, DIMENSIONS AB AND AH,

16、 AND TOLERANCES AC, AD, AE & AG DASH NO. AB AC AD AE AG AH -3 -4 -5 -6 -7 -8 -9 -10 -12 -14 -16 .130 - .150 .184 - .204 .239 - .259 .301 - .321 .354 - .374 .416 - .436 .472 - .492 .534 - .554 .650 - .670 .764 - .784 .874 - .894 .006 .007 .008 .010 .010 .012 .013 .016 .017 .022 .025 .001 .001 .001 .0

17、008 .0008 .0006 .0006 .0006 .0006 .0006 .0006 .003 .003 .003 .003 .003 .003 .003 .003 .003 .005 .005 .015 .015 .015 . .020 .020 .020 .020 .020 .020 .030 .030 .060 - .070 .080 - .090 .090 - .110 .090 - .110 .090 - .110 .090 - .110 .090 - .110 .090 - .110 .090 - .110 .120 - .145 .120 - .145 AEROSPACE

18、STANDARD AS3659 SHEET 3 OF 12 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN NOTES: 1. FOR PARTS WITH A MINIMUM GRIP LENGTH (DIM N) EQUAL TO OR LESS THAN 1.5D THE THREAD PD (DATUM -Z- ) SHALL REPLACE DATUM -Y- . 2. MA

19、TERIAL: COBALT-NICKEL ALLOY PER AMS 5842 (UNS R30159). 3. PROCUREMENT SPECIFICATION: AS7475. 4. FLUORESCENT PENETRANT INSPECTION PER ASTM E 1417. 5. SURFACE TEXTURE: SYMBOLS PER ASME Y14.36M. REQUIREMENTS PER ASME B46.1. UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 125 in Ra. 6. BREAK SHARP EDGES .003

20、 TO .015, UNLESS OTHERWISE SPECIFIED. 7. DIMENSIONS IN INCHES. 8. DIMENSIONING AND TOLERANCING PER ANSI Y14.5-1982 (ASME PUBLICATION). 9. DO NOT USE UNASSIGNED PART NUMBERS. 10. THE PART NUMBER SHALL CONSIST OF THE BASIC PART NUMBER, FIRST DASH NUMBER DESIGNATING THE NOMINAL DIAMETER AND THE SECOND

21、DASH NUMBER DESIGNATING THE MINIMUM GRIP IN SIXTEENTHS (.0625) OF AN INCH. EXAMPLE OF COMPLETE PART NUMBER: - AS3659 - 4 14 BASIC PART NUMBER - - MINIMUM GRIP = .8750 INCHES NOMINAL DIAMETER = .2500 INCHES - 11. THE CHANGE BAR ( l ) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LO

22、CATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT. AS AND AMS ARE SAE INTERNATIONAL PUBLICATIONS. ASME IS AN AMERICAN SOCIETY OF MECHANICA

23、L ENGINEERS PUBLICATION. ASTM IS AN ASTM INTERNATIONAL PUBLICATION. AEROSPACE STANDARD AS3659 SHEET 4 OF 12 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 2 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .1900 NO

24、MINAL DIAMETER BOLTS PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 AS3659-3-02 AS3659-3-03 AS3659-3-04 AS3659-3-05 AS3659-3-06 AS3659-3-07 AS3659-3-08 AS3659-3-09 AS3659-3-10 AS3659-3-11 AS3659-3-12 AS3659-3-13 AS3659-3-14 AS3659-3-15 AS365

25、9-3-16 AS3659-3-17 .125 .188 .250 .312 .375 .438 .500 .562 .625 .688 .750 .812 .875 .938 1.000 1.062 .198 .261 .322 .385 .448 .510 .572 .634 .698 .760 .822 .884 .948 1.010 1.072 1.134 .610 - .630 .673 - .693 .734 - .754 .797 - .817 .860 - .880 .922 - .942 .984 - 1.004 1.046 - 1.066 1.110 - 1.130 1.1

26、72 - 1.192 1.234 - 1.254 1.296 - 1.316 1.360 - 1.380 1.422 - 1.442 1.484 - 1.504 1.546 - 1.566 .986 1.040 1.093 1.146 1.200 1.253 1.306 1.360 1.414 1.467 1.520 1.574 1.628 1.681 1.734 1.788 AS3659-3-18 AS3659-3-19 AS3659-3-20 AS3659-3-21 AS3659-3-22 AS3659-3-23 AS3659-3-24 AS3659-3-25 AS3659-3-26 AS

27、3659-3-27 AS3659-3-28 AS3659-3-29 AS3659-3-30 AS3659-3-31 AS3659-3-32 1.125 1.188 1.250 1.312 1.375 1.438 1.500 1.562 1.625 1.688 1.750 1.812 1.875 1.938 2.000 1.198 1.260 1.322 1.384 1.448 1.510 1.572 1.634 1.698 1.760 1.822 1.884 1.948 2.010 2.072 1.610 - 1.630 1.672 - 1.692 1.734 - 1.754 1.796 -

28、1.816 1.860 - 1.880 1.922 - 1.942 1.984 - 2.004 2.046 - 2.066 2.110 - 2.130 2.172 - 2.192 2.234 - 2.254 2.296 - 2.316 2.360 - 2.380 2.422 - 2.442 2.484 - 2.504 1.842 1.895 1.948 2.002 2.056 2.109 2.162 2.216 2.270 2.323 2.376 2.430 2.484 2.538 2.591 TABLE 3 - PART NUMBER AND SHANK LENGTH DIMENSIONS

29、FOR .2500 NOMINAL DIAMETER BOLTS PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 AS3659-4-02 AS3659-4-03 AS3659-4-04 AS3659-4-05 AS3659-4-06 AS3659-4-07 AS3659-4-08 AS3659-4-09 AS3659-4-10 AS3659-4-11 AS3659-4-12 AS3659-4-13 AS3659-4-14 AS365

30、9-4-15 AS3659-4-16 AS3659-4-17 .125 .188 .250 .312 .375 .438 .500 .562 .625 .688 .750 .812 .875 .938 1.000 1.062 .206 .269 .331 .939 .456 .519 .581 .643 .706 .769 .831 .893 .955 1.019 1.081 1.143 .715 - .735 .778 - .798 .840 - .860 .902 - .922 .965 - .985 1.028 - 1.048 1.090 - 1.110 1.152 - 1.172 1.

31、215 - 1.235 1.278 - 1.298 1.340 - 1.360 1.402 - 1.422 1.465 - 1.485 1.528 - 1.548 1.590 - 1.610 1.652 - 1.672 1.920 2.013 2.106 2.198 2.291 2.384 2.476 2.569 2.662 2.755 2.847 2.940 3.032 3.125 3.218 3.311 AS3659-4-18 AS3659-4-19 AS3659-4-20 AS3659-4-21 AS3659-4-22 AS3659-4-23 AS3659-4-24 AS3659-4-2

32、5 AS3659-4-26 AS3659-4-27 AS3659-4-28 AS3659-4-29 AS3659-4-30 AS3659-4-31 AS3659-4-32 1.125 1.188 1.250 1.312 1.375 1.438 1.500 1.562 1.625 1.688 1.750 1.812 1.875 1.938 2.000 1.206 1.269 1.331 1.393 1.456 1.519 1.581 1.643 1.706 1.769 1.831 1.893 1.956 1.019 2.081 1.715 - 1.735 1.778 - 1.798 1.840

33、- 1.860 1.902 - 1.922 1.965 - 1.985 2.028 - 2.048 2.090 - 2.110 2.152 - 2.172 2.215 - 2.235 2.278 - 2.298 2.340 - 2.360 2.402 - 2.422 2.465 - 2.485 2.528 - 2.548 2.590 - 2.610 3.404 3.496 3.589 3.682 3.774 3.867 3.960 4.052 4.145 4.238 4.331 4.423 4.516 4.609 4.702 AEROSPACE STANDARD AS3659 SHEET 5

34、OF 12 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 4 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .3125 NOMINAL DIAMETER BOLTS PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 PART NUMBER N MIN (GRIP) M M

35、AX L APPROX. MASS LB/100 AS3659-5-03 AS3659-5-04 AS3659-5-05 AS3659-5-06 AS3659-5-07 AS3659-5-08 AS3659-5-09 AS3659-5-10 AS3659-5-11 AS3659-5-12 AS3659-5-13 AS3659-5-14 AS3659-5-15 AS3659-5-16 AS3659-5-17 AS3659-5-18 AS3659-5-19 AS3659-5-20 AS3659-5-21 .188 .250 .312 .375 .438 .500 .562 .625 .688 .7

36、50 .812 .875 .938 1.000 1.062 1.125 1.188 1.250 1.312 .281 .343 .405 .468 .531 .593 .655 .718 .781 .843 .905 .968 1.031 1.093 1.155 1.218 1.281 1.343 1.405 .896 - .916 .958 - .978 1.020 - 1.040 1.083 - 1.103 1.146 - 1.166 1.208 - 1.228 1.270 - 1.290 1.333 - 1.353 1.396 - 1.416 1.458 - 1.478 1.520 -

37、1.540 1.583 - 1.603 1.646 - 1.666 1.708 - 1.728 1.770 - 1.790 1.833 - 1.853 1.896 - 1.916 1.958 - 1.978 2.020 - 2.040 3.606 3.751 3.896 4.040 4.185 4.330 4.475 4.620 4.764 4.909 5.054 5.199 5.344 5.488 5.633 5.778 5.923 6.068 6.212 AS3659-5-22 AS3659-5-23 AS3659-5-24 AS3659-5-25 AS3659-5-26 AS3659-5

38、-27 AS3659-5-28 AS3659-5-29 AS3659-5-30 AS3659-5-31 AS3659-5-32 AS3659-5-33 AS3659-5-34 AS3659-5-35 AS3659-5-36 AS3659-5-37 AS3659-5-38 AS3659-5-39 AS3659-5-40 1.375 1.438 1.500 1.562 1.625 1.688 1.750 1.812 1.875 1.938 2.000 2.062 2.125 2.188 2.250 2.312 2.375 2.438 2.500 1.468 1.531 1.593 1.655 1.

39、718 1.781 1.843 1.905 1.968 2.031 2.093 2.155 2.218 2.281 2.343 2.405 2.468 2.531 2.593 2.083 - 2.103 2.146 - 2.166 2.208 - 2.228 2.270 - 2.290 2.333 - 2.353 2.396 - 2.416 2.458 - 2.478 2.520 - 2.540 2.583 - 2.603 2.646 - 2.666 2.708 - 2.728 2.770 - 2.790 2.833 - 2.853 2.896 - 2.916 2.958 - 2.978 3.

40、020 - 3.040 3.083 - 2.103 3.146 - 3.166 3.208 - 3.228 6.357 6.502 6.647 6.792 6.936 7.081 7.226 7.371 7.516 7.660 7.805 7.950 8.095 8.240 8.384 8.529 8.674 8.819 8.964 TABLE 5 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .3750 NOMINAL DIAMETER BOLTS PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/

41、100 PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 AS3659-6-03 AS3659-6-04 AS3659-6-05 AS3659-6-06 AS3659-6-07 AS3659-6-08 AS3659-6-09 AS3659-6-10 AS3659-6-11 AS3659-6-12 AS3659-6-13 AS3659-6-14 AS3659-6-15 AS3659-6-16 AS3659-6-17 AS3659-6-18 AS3659-6-19 AS3659-6-20 AS3659-6-21 .188 .250 .312

42、.375 .438 .500 .562 .625 .688 .750 .812 .875 .938 1.000 1.062 1.125 1.188 1.250 1.312 .281 .343 .405 .468 .531 .593 .655 .718 .781 .843 .905 .968 1.031 1.093 1.155 1.218 1.281 1.343 1.405 .983 - 1.003 1.045 - 1.065 1.107 - 1.127 1.170 1.190 1.233 - 1.253 1.295 - 1.315 1.357 - 1.377 1.420 - 1.440 1.4

43、83 - 1.503 1.545 - 1.565 1.607 - 1.627 1.670 - 1.690 1.733 - 1.753 1.795 - 1.815 1.857 - 1.877 1.920 - 1.940 1.983 - 2.003 2.045 - 2.065 2.107 - 2.127 5.698 5.906 6.115 6.323 6.532 6.740 6.949 7.157 7.366 7.574 7.783 7.991 8.200 8.408 8.617 8.825 9.034 9.242 9.451 AS3659-6-22 AS3659-6-23 AS3659-6-24

44、 AS3659-6-25 AS3659-6-26 AS3659-6-27 AS3659-6-28 AS3659-6-29 AS3659-6-30 AS3659-6-31 AS3659-6-32 AS3659-6-33 AS3659-6-34 AS3659-6-35 AS3659-6-36 AS3659-6-37 AS3659-6-38 AS3659-6-39 AS3659-6-40 1.375 1.438 1.500 1.562 1.625 1.688 1.750 1.812 1.875 1.938 2.000 2.062 2.125 2.188 2.250 2.312 2.375 2.438

45、 2.500 1.468 1.531 1.593 1.655 1.718 1.781 1.843 1.905 1.968 2.031 2.093 2.155 2.218 2.281 2.343 2.405 2.468 2.531 2.593 2.170 - 2.190 2.233 - 2.253 2.295 - 2.315 2.357 - 2.377 2.420 - 2.440 2.483 - 2.503 2.545 - 2.565 2.607 - 2.627 2.670 - 2.690 2.733 - 2.753 2.795 - 2.815 2.857 - 2.877 2.920 - 2.9

46、40 2.983 - 3.003 3.045 - 3.065 3.107 - 3.127 3.170 - 3.190 3.233 - 3.353 3.295 - 3.315 9.659 9.868 10.076 10.285 10.493 10.702 10.910 11.118 11.327 11.536 11.744 11.952 12.161 12.370 12.578 12.786 12.995 13.204 13.412 AEROSPACE STANDARD AS3659 SHEET 6 OF 12 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WA

47、SHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 6 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .4375 NOMINAL DIAMETER BOLTS PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 AS3659-7-03 AS3659-7-04

48、 AS3659-7-05 AS3659-7-06 AS3659-7-07 AS3659-7-08 AS3659-7-09 AS3659-7-10 AS3659-7-11 AS3659-7-12 AS3659-7-13 AS3659-7-14 AS3659-7-15 AS3659-7-16 AS3659-7-17 AS3659-7-18 AS3659-7-19 AS3659-7-20 AS3659-7-21 AS3659-7-22 AS3659-7-23 AS3659-7-24 AS3659-7-25 .188 .250 .312 .375 .438 .500 .562 .625 .688 .7

49、50 .812 875 .938 1.000 1.062 1.125 1.188 1.250 1.312 1.375 1.438 1.500 1.562 .298 .360 .422 .485 .548 .610 .672 .735 .798 .860 .922 .985 1.048 1.110 1.172 1.235 1.298 1.360 1.422 1.485 1.548 1.610 1.672 1.112 - 1.132 1.174 - 1.194 1.236 - 1.256 1.299 - 1.319 1.362 - 1.382 1.424 - 1.444 1.486 - 1.506 1.549 - 1.569 1.612 - 1.632 1.674 - 1.694 1.736 - 1.756 1.799 - 1.819 1.862 - 1.882 1.924 - 1.944 1.986 - 2.006 2.049 - 2.069 2.112 - 2.132 2.174 - 2.194 2.236 - 2.256 2.29