SAE AS 5355 1B-2017 COUPLINGS CLAMP GROOVED V-BAND 1 75 TO 14 25 FLANGE OD (-65 TO 800 .pdf

1、 AEROSPACE STANDARD COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 800 F) AS5355/1Copyright 2017 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical,

2、 photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED1998-09 REAFFIRMED2015

3、-04 REVISED2017-04THIRD ANGLE PROJECTION CUSTODIAN: G-3/G-3A REV.BFEDERAL SUPPLY CLASS 5340 AS5355/1 SHEET 1 OF 3 REV. B PROCUREMENT SPECIFICATION: AS5355 /1/, /2/, /3/ SAETechnicalStandardsBoard Rulesprovidethat:“Thisreportispublished bySAEto advance the state oftechnicaland engineering sciences.Th

4、e use ofthisreportisentirelyvoluntary,anditsapplicabilityandsuitabilityforanyparticularuse,includinganypatentinfringementarising therefrom,isthe sole responsibilityoftheuser.”SAEreviewseachtechnicalreportatleasteveryfive yearsatwhich time itmaybe revised,reaffirmed,stabilized,orcancelled.SAEinvitesy

5、ourwritten commentsandsuggestions.SAE values your input. To provide feedback on this Technical Report, please visit http:/standards.sae.org/AS5355/1B RATIONALE THIS REVISION CORRECTS THE LOCATION OF THE “B“ DIMENSION AND REVISED TABLE 1. FIGURE 1 - V-BAND COUPING CLAMP TABLE 1 - DIMENSIONS SIZE CODE

6、 RANGE /4/ B MAX B B MAX R D MAX B D MAX R BOLT DIA R .020 01 - 09 2.78 2.78 .80 1.10 .250 .055 10 - 21 3.03 3.03 .95 1.25 .312 .063 22 - 37 3.53 3.53 1.20 1.25 .312 .063 AEROSPACE STANDARD AS5355/1 SHEET 2 OF 3 REV. B COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 800 F) TABLE 2

7、 - DIMENSIONS AND WEIGHTS BASIC NUMBER AS5355/1 SIZE CODE FLANGE OD AS24563 TYPE 2 AXIAL LOAD RATING (LBF) A +.03 -.06 C MAX B C MAX R RATING TORQUE (LBF-IN) LB/EA, MAX B LB/EA, MAX R 01 1.75 8790 1.88 1.75 1.85 50 .35 .39 02 1.88 8820 2.00 1.80 1.90 50 .36 .40 03 2.00 8855 2.12 1.85 1.95 50 .37 .41

8、 04 2.12 8890 2.25 1.90 2.00 50 .39 .43 05 2.25 8925 2.38 2.00 2.10 50 .40 .44 06 2.38 8960 2.50 2.05 2.15 50 .41 .45 07 2.50 8995 2.62 2.10 2.20 50 .42 .46 08 2.62 9025 2.75 2.20 2.30 50 .44 .48 09 2.75 9060 2.88 2.25 2.35 50 .45 .49 10 2.88 13850 3.00 2.45 2.50 100 .77 .85 11 3.00 13925 3.12 2.50

9、2.60 100 .79 .87 12 3.12 14000 3.25 2.60 2.65 100 .80 .88 13 3.25 14100 3.38 2.65 2.70 100 .82 .90 14 3.50 14325 3.62 2.75 2.85 105 .85 .93 15 3.75 14500 3.88 2.90 2.95 105 .88 .96 16 4.00 14725 4.12 3.00 3.10 105 .92 1.00 17 4.25 14900 4.38 3.15 3.20 105 .95 1.03 18 4.75 15300 4.88 3.40 3.45 110 1.

10、02 1.10 19 5.25 15700 5.38 3.65 3.70 115 1.09 1.17 20 5.75 16100 5.88 3.90 3.95 115 1.16 1.24 21 6.25 16500 6.38 4.15 4.20 120 1.60 1.68 22 6.75 16950 6.88 4.40 4.45 120 1.67 1.75 23 7.25 17400 7.38 4.65 4.70 125 1.74 1.82 24 7.75 17800 7.88 4.90 4.95 130 1.81 1.89 25 8.25 18250 8.38 5.15 5.20 130 1

11、.88 1.96 26 8.75 18700 8.88 5.40 5.45 135 1.95 2.03 27 9.25 19100 9.38 5.65 5.70 140 2.02 2.10 28 9.75 19550 9.88 5.90 5.95 140 2.10 2.18 29 10.25 20000 10.38 6.15 6.20 145 2.17 2.25 30 10.75 20500 10.88 6.40 6.45 150 2.24 2.32 31 11.25 21000 11.38 6.65 6.70 150 2.37 2.39 32 11.75 21450 11.88 6.90 6

12、.95 155 2.39 2.47 33 12.25 21900 12.38 7.15 7.20 160 2.46 2.54 34 12.75 22400 12.88 7.40 7.45 160 2.53 2.61 35 13.25 22850 13.38 7.65 7.70 165 2.60 2.68 36 13.75 23300 13.88 7.90 7.95 170 2.67 2.75 37 14.25 23800 14.38 8.15 8.20 170 2.74 2.82 NOTES /1/ MATERIAL: 300 SERIES STAINLESS STEEL PER PROCUR

13、EMENT SPECIFICATION AS5355. /2/ FINISH: PASSIVATE STAINLESS STEEL PER ASTM A967 OR AMS2700. /3/ QUALIFICATION: PRODUCT SUPPLIED TO THIS SPECIFICATION SHALL BE MANUFACTURED BY AN ACCREDITED MANUFACTURER LISTED IN THE PERFORMANCE REVIEW INSTITUTE (PRI) QUALIFIED PRODUCTS LIST (QPL) PRI-QPL-AS5355 FOR

14、THIS STANDARD. SEE www.eAuditN FOR CURRENT QPL ON-LINE. /4/ DOUBLE LATCH COUPLINGS (TYPE BR) ARE AVAILABLE FOR ONLY SIZES 21 AND UP. 5. LATCH ELEMENTS ARE OPTIONAL WITHIN ENVELOPES SHOWN. AEROSPACE STANDARD AS5355/1 SHEET 3 OF 3 REV. B COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65

15、TO 800 F) 6. ENVELOPE DIMENSIONS APPLY WHEN THE COUPLING IS IN THE TIGHTENED CONDITION AT THE MAXIMUM AND MINIMUM POSITIONS OF ITS DIAMETRICAL RANGE. 7 QUICK RELEASE LATCH COUPLING SHALL CONTAIN ONLY ONE QUICK RELEASE LATCH. /8/ MARKING: BY ELECTROCHEMICAL ETCHING PER AS478-7A2 OR LASER MARKING PER

16、AS478-15A2. THE COUPLING SHALL BE MARKED WITH SUPPLIER IDENTIFICATION AND AS5355/1-XX PART NUMBER PER AS5355. 9. OPERATING TEMPERATURE: -65 TO 800 F. 10. BREAK EDGES .003 TO .015, UNLESS OTHERWISE SPECIFIED. 11. DIMENSIONING AND TOLERANCING: ASME Y14.5M-1994. 12. DIMENSIONS ARE IN INCHES. UNLESS OTH

17、ERWISE SPECIFIED, TOLERANCES: LINEAR DIMENSIONS .XXX = .010, .XX = .03, ANGULAR DIMENSIONS .5. 13. EXAMPLE OF PART NUMBER: 14. REVISION INDICATOR: A CHANGE BAR (I) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE B

18、EEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY. AS5355/1-01 B B = BASIC T-BOLT LATCH COUPLING R = QUICK RELEASE LATCH COUPLING BR = BASIC T-BOLT AND QUICK RELEASE LATCH COUPLING SIZE CODE (FLANGE OD = 1.75) BASIC PART NUMBER