SAE AS 5382 1A-2007 CABLE FIBER OPTIC MULTIMODE 100 140 172 m GRADED INDEX HERMETIC COATED TIGHT BUFFER《密封涂层紧包缓冲层100 140 172 m分级指数多模光纤光缆》.pdf

1、 AEROSPACE STANDARD CABLE, FIBER OPTIC, MULTIMODE, 100/140/172 m GRADED INDEX, HERMETIC COATED, TIGHT BUFFER AS5382/1 Copyright 2007 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electro

2、nic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2003-07R

3、EVISED 2007-01THIRD ANGLE PROJECTION CUSTODIAN: SAE AE-8/AE-8D REV. A FEDERAL SUPPLY CLASS6010 AS5382/1 SHEET 1 OF 4 REV. A SAE TechnicalStandards Board Rules provide that: “This report ispublished by SAE toadvance thestate of technical andengineering sciences. Theuse of thisreportis entirely volunt

4、ary, andits applicabilityandsuitability forany particularuse,including any patent infringement arising therefrom, is thesole responsibility oftheuser.” SAE reviews each technical report at least every five yearsat which time it may be reaffirmed, revised, orcancelled.SAE invites yourwritten comments

5、andsuggestions.RATIONALE CORRECT PUBLISHING ERRORS. CHANGE TECHNICAL DETAILS TO MAKE CABLE MORE PRODUCIBLE. FIGURE 1 - CABLE CONFIGURATION 1. Construction Description: 1.1 Optical Fiber Dimensions and Materials Core Diameter: 100 m 3 m (0.0039 in 0.00012 in) Core Material: Graded Index Silica Glass

6、Cladding Diameter: 140 m 2 m (0.0055 in 0.00008 in) Cladding Material: Silica Glass Core to Cladding Ellipticity: 2% maximum Core to Cladding Offset: 2 m maximum Hermetic Coated: Yes Coating Diameter: 171.5 m 1 m (0.00675 in 0.00004 in) 0.66 Cpk with lower limit of 170.5 micron Coating Material: Pol

7、yimide 1.2 Cable Dimensions and Materials Secondary Buffer Diameter: 450 m 25 m (0.0177 in 0.001 in) Secondary Buffer Material: Silicone Buffer Concentricity: 65% minimum Upjacket Diameter: 900 m 50 m (0.0354 in 0.002 in) Upjacket Material: Ethylene-Tetrafluoroethylene Copolymer (ETFE) Strength Memb

8、er: Braided Para-Aramid Fiber Yarn Size 380 Denier Number of Ends 16 Braid Picks/Inch 14.5 AEROSPACE STANDARD CABLE, FIBER OPTIC, MULTIMODE, 100/140/172 m GRADED INDEX, HERMETIC COATED, TIGHT BUFFER AS5382/1 REV. A AS5382/1 SHEET 2 OF 4 REV. A Outer Jacket Diameter: 1800 m 100 m (0.0709 in 0.039 in

9、maximum) Outer Jacket Material: Ethylene-Tetrafluoroethylene Copolymer (ETFE) Outer Jacket Concentricity: 6% of Jacket Outer Diameter 1.3 Cable Performance Operational Mode: Multimode Temperature Rating: -55 to +165 C Storage Temperature: -55 to +85 C Outer Jacket Color: Green Finished Cable Weight:

10、 4.0 kg/km maximum 2. Optical Fiber Requirements: Maximum Attenuation: 8 dB/km 850 nm, 6 dB/km 1300 nm Numerical Aperture: 0.29 0.02 Fiber Tensile Proof Test: 200,000 psi minimum Bandwidth: 200 MHz-km 850 nm & 1300 nm 3. Environmental: Fluid Immersion: See Table 1 for test fluid listing. Freezing Wa

11、ter Immersion: 0.5 dB change in optical transmittance during the test with 0.5 dB permanent change after test Humidity Resistance: 0.5 dB change in optical transmittance during the test with 0.5 dB permanent change after test Wicking: Water Penetration of 88.5 mm maximum Fungus Resistance: Fungus in

12、ert per MIL-HDBK-454 Guideline 4 Blocking: No areas of localized adhesion 4. Mechanical: Cold Bend: 0.5 dB change in optical transmittance after test Cyclic Flex: 0.5 dB change in optical transmittance during the test with 0.5 dB permanent change after test Test temps: -55 C, +25 C, +150 C Impact Re

13、sistance: 0.5 dB change in optical transmittance during the test with 0.5 dB permanent change after test Test Cycles: 50 at -55C, 100 at +25 C, 50 at +150 C Crush Resistance: 0.5 dB change in optical transmittance during the test with 0.5 dB permanent change after test Corner Bend: 0.5 dB change in

14、optical transmittance during the test with 0.5 dB permanent change after test Cable Tensile Load and 0.5 dB change in optical transmittance during the test with Bending: 0.5 dB permanent change after test Maximum tensile load 132 N Jacket Material Tensile Strength: 900 N/cm2minimum Tensile and Elong

15、ation: Elongation: 125% minimum AEROSPACE STANDARD CABLE, FIBER OPTIC, MULTIMODE, 100/140/172 m GRADED INDEX, HERMETIC COATED, TIGHT BUFFER AS5382/1 REV. A AS5382/1 SHEET 3 OF 4 REV. A Durability of Manufacturers Required unless identification marking is under a clear jacket Identification: Jacket S

16、trippability: Easily Removed, No damage to Fiber at 10X 5. Thermal: Flammability: After Flame: 30 seconds maximum Flame Travel: 3 inches maximum Tissue Flaming: None Thermal Shock: Temperature Range: -55 to +165 C Maximum Cable Diameter Change of 10% 0.5 dB change in optical transmittance after test

17、 Property Retention 750 hours 180 C, After Thermal Aging: 300 hours 200 C, 100 hours 220 C Maximum Cable Diameter Change of 10% 0.5 dB change in optical transmittance after test Jacket tensile and elongation: 75% of initial value Storage Life: Temperature Range: -55 to +85 C No Visual Damage at 10X

18、Magnification 0.5 dB change in optical transmittance after test Temperature Cycling: 5 cycles, temperature range: -55 to +165 C Maximum Cable Diameter Change of 10% 0.5 dB change in optical transmittance during the test with 0.5 dB permanent change after test Temperature Cycling 5 cycles, temperatur

19、e range: -55 to +165 C With Mandrel: Wrapped 5 times around a 0.75 inch mandrel 0.5 dB change in optical transmittance during the test with 0.5 dB permanent change after test Jacket Shrinkage: 2.3 mm maximum in a 360 mm sample AEROSPACE STANDARD CABLE, FIBER OPTIC, MULTIMODE, 100/140/172 m GRADED IN

20、DEX, HERMETIC COATED, TIGHT BUFFER AS5382/1 REV. A AS5382/1 SHEET 4 OF 4 REV. A TABLE 1 - IMMERSION TEST FLUIDS Test Fluid Test Temperature Immersion Time MIL-PRF-23699, Lubricating Oil, Aircraft Turbine Engine, Synthetic Base 48 to 50 C 20 hours MIL-PRF-5606, Hydraulic Fluid, Petroleum Base, Aircra

21、ft, Missile and Ordnance 48 to 50 C 20 hours TT-I-735, Isopropyl Alcohol (Grade A or B) 20 to 25 C 168 hours MIL-DTL-5624, Turbine Fuel, Aviation, Grade JP-4 and JP-5 20 to 25 C 168 hours SAE AMS 1424, Deicing/Anti-Icing Fluid, Aircraft, SAE Type I propylene glycol based 48 to 50 C 20 hours SAE AMS

22、1435, Fluid, Deicing/Anti-Icing, Runways and Taxiways, potassium Acetate Base 48 to 50 C 20 hours MIL-C-43616, Cleaning Compound, Aircraft Surface 48 to 50 C 20 hours ASTM D 1153, Methyl Isobutyl Ketone (for use in Organic Coatings) 20 to 25 C 168 hours MIL-PRF-7808, Lubricating Oil, Aircraft Turbin

23、e Engine, Synthetic Base 118 to 121 C 30 minutes MIL-PRF-85570, Type 3 Cleaning Compound, Alkaline 63 to 68 C 20 hours MIL-PRF-87252, Coolant Fluid, Hydrolytically Stable, Dielectric (POA) 20 to 25 C 168 hours MIL-DTL-83133, Turbine Fuel, Aviation Grade, JP-8 20 to 25 C 168 hours MIL-PRF-83282, Hydr

24、aulic Fluid 48 to 50 C 20 hours Halon Bromotrifluoromethane (CFBR) Gas at -76 C 48 to 50 C 168 hours Halon Bromotrifluoromethane (CFBR) Gas at -76 C -55 to -65 C 168 hours THE CHANGE BAR ( l ) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT.