SAE AS 81511 5-2014 CONNECTOR RECEPTACLE CABLE CONNECTING ELECTRICAL CIRCULAR HIGH DENSITY QUICK DISCONNECT ENVIRONMENT RESISTING CRIMP TYPE CONTACTS AND ACCESSORIES (CLASS A F AND.pdf

1、AEROSPACE STANDARD CONNECTOR, RECEPTACLE, CABLE CONNECTING ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECTENVIRONMENT RESISTING, CRIMP TYPE CONTACTS; ANDACCESSORIES (CLASS A, F, AND E - SERIES 2)AS81511/5Copyright 2014 SAE International All rights reserved. No part of this publication may be re

2、produced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax:

3、 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2014-10THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 FEDERAL SUPPLY CLASS 5935AS81511/5SHEET 1 OF 4PROCUREMENT SPECIFICATION: AS81511SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE

4、toadvance thestate of technicalandengineering sciences. Theuse ofthisreportis entirelyvoluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, is thesole responsibilityoftheuser.”SAE reviews eachtechnicalreport at least every five yea

5、rs at which time itmay berevised,reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS81511/5RATIONALE THIS DETAIL SPECIFICATION SHEET IS WRITTEN T

6、O PERMIT THE CANCELLATION AND SUPERSESSION OF MIL-C-81511/5 WITH THIS DOCUMENT. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. FIGURE 1 - CONNECTOR RECEPTACLE, CABLE CONNECTING AEROSPACE STANDARD AS81511/5SH

7、EET 2 OF 4CONNECTOR, RECEPTACLE, CABLE CONNECTING ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS; AND ACCESSORIES (CLASS A, F, AND E - SERIES 2)FIGURE 1A - CONNECTOR RECEPTACLE TABLE 1 - FIGURE 1 METRIC EQUIVALENTS INCHES MILLIMETERS INCHES MILLIMETE

8、RS INCHES MILLIMETERS .003 0.08 .067 1.70 .230 5.84 .005 0.13 .073 1.85 .555 14.10.006 0.15 .090 2.29 .575 14.61 .010 0.25 .094 2.39 1.275 32.39.015 0.38 .200 5.08 1.340 34.04 TABLE 2 - FIGURE 1 DIMENSIONS SHELLSIZEBDEFTHREADGACROSS FLATS KARBSCBRBSCCR BSCDR BSCEE BSC POSITION 1 234568 .553(14.05) .

9、547(13.89) .430(10.92) .424(10.77) .422(10.72) .407(10.34) 1/2-28UNEF-2A.565(14.35) .553(14.05) .780(19.81) .760(19.30)128 - - - 40 40 40 40 40 4010.678(17.22) .672(17.07) .555(14.10) .549(13.94) .548(13.92) .533(13.54) 5/8-28UN-2A .690(17.53) .678(17.22) .900(22.86) .880(22.35)105 140 215 265 60 46

10、 46 60 89 6014.928(23.57) .922(23.42) .805(20.45) .799(20.29) .798(20.27) .783(19.89) 7/8-28UN-2A .940(23.88) .928(23.57) 1.150(29.21) 1.130(28.70)105 140 215 265 60 46 46 60 89 60161.054(26.77) 1.048(26.62) .930(23.63) .924(23.47) .924(23.47) .909(23.09) 1-28UN-2A 1.066(27.08) 1.054(26.77) 1.280(32

11、51) 1.260(32.00)105 140 215 265 50 50 50 50 50 50181.178(29.92) 1.172(29.77) 1.055(26.80) 1.049(26.64) 1.048(26.62) 1.033(26.24) 1 1/8-28UN-2A1.190(30.23) 1.178(29.92) 1.400(35.56) 1.380(35.05)105 140 215 265 50 50 50 50 50 50AEROSPACE STANDARD AS81511/5SHEET 3 OF 4CONNECTOR, RECEPTACLE, CABLE CONN

12、ECTING ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS; AND ACCESSORIES (CLASS A, F, AND E - SERIES 2)REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. 1. DESIGN: CONNECTORS SHALL BE DESIGNED IN ACCORDANCE

13、WITH FIGURE 1 AND TABLE 2. DIMENSIONS ARE IN INCHES AND ARE AFTER PLATING. METRIC EQUIVALENTS ARE GIVEN FOR INFORMATION ONLY AND ARE BASED ON 1 INCH = 25.4 MM. UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE .016 INCHES. THE NORMAL MATING KEYWAY POSITION IS SHOWN IN FIGURES 1 AND 1A. FOR ALTERNATE KEYWAY

14、 POSITIONS, SEE AS81511 FIGURE 4. THE .200 MAX. DIMENSION IN FIGURE 1A IS THE DISTANCE FROM THE FRONT OF THE SHELL TO THE POINT AT WHICH A GAGE PIN, HAVING THE SAME BASIC DIAMETER AS THE PLUG SHELL, ENGAGES THE SPRING MEMBER. CONNECTORS ARE SERIES 2, CLASSES ARE A, F, AND E. CONTACTS ARE CRIMP TYPE

15、REMOVABLE, STYLE P AND S. 2. FOR INSERT ARRANGEMENTS, SEE AS81511, APPENDIX A. 3. PART NUMBER: THE CONNECTOR PART NUMBER WILL CONSIST OF THE LETTER M, THE BASIC SPECIFICATION NUMBER/APPLICABLE SPECIFICATION SHEET, AND THE APPLICABLE ALPHA-NUMERIC CHARACTERS ON THE CONNECTOR SHELL. THE PART NUMBER SH

16、ALL BE FORMULATED AS IN THE FOLLOWING EXAMPLE: M81511/05ED01P1. M81511/05 E D 01 P 1 BASIC PART NUMBERCLASSSHELL SIZE INSERT ARRANGEMENT CONTACT DESIGNATOR KEY POSITIONS 4. SHELL POLARIZATION: 1 THROUGH 6 KEY POSITION. 5. INSERTION AND REMOVAL TOOLS: AS81969/2 INSERTION TOOL, AS81969/3 REMOVAL TOOL.

17、 6. MATING CONNECTOR: THIS RECEPTACLE MATES DIRECTLY WITH AN AS81511/6 PLUG. 7. CONNECTOR WEIGHT: THE CONNECTOR REFERENCE WEIGHTS ARE LISTED IN TABLE 3. TABLE 3 - CONNECTOR WEIGHT SHELL SIZE WEIGHT (REFERENCE - POUNDS) 1/ 18 (CODE F) .074 16 (CODE E) .066 14 (CODE D) .052 10 (CODE B) .031 8 (CODE A)

18、 .024 1/ CONTACTS NOT INCLUDED IN WEIGHT. AEROSPACE STANDARD AS81511/5SHEET 4 OF 4CONNECTOR, RECEPTACLE, CABLE CONNECTING ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS; AND ACCESSORIES (CLASS A, F, AND E - SERIES 2)APPLICATION NOTES: 1. FOR SHELL SI

19、ZES 20, 22 AND 24, USE AS81511/25 CONNECTORS. 2. AS81511 CONNECTORS AND ACCESSORIES ARE NOT RECOMMENDED FOR NEW DESIGN. SPECIFICATION NOTES: NOTICE THIS DOCUMENT REFERENCES A PART WHICH CONTAINS CADMIUM AS A PLATING MATERIAL. CONSULT LOCAL OFFICIALS IF YOU HAVE QUESTIONS CONCERNING CADMIUMS USE. 1.

20、A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.