SAE AS 85049 145-2015 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL 45 DEGREE NON-SELF LOCKING AND SELF LOCKING MS V THREAD CATEGORY 3B (FOR MIL-DTL-83723 SERIES III AS50151 SERIES II.pdf

1、 AEROSPACE STANDARD CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 45 DEGREE, NON-SELF LOCKING AND SELF LOCKING, MS “V” THREAD, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, AS50151 SERIES II & III, AS81703 SERIES III, MIL-DTL-26482 SERIES II AND AS95234 CONNECTORS) AS85049/145Copyright 2015 SAE Internat

2、ional All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323

3、 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED2015-01THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 FEDERAL SUPPLY CLASS 5935 SAETechnicalStandardsBoard Rulesprovidethat:“Thisreportispublished bySAE

4、to advance the state oftechnicaland engineering sciences.The use ofthisreportisentirelyvoluntary,anditsapplicabilityandsuitabilityforanyparticularuse,includinganypatentinfringementarising therefrom,isthe sole responsibilityoftheuser.”SAEreviewseachtechnicalreportatleasteveryfiveyearsatwhich time itm

5、aybe revised,reaffirmed, stabilized,orcancelled.SAEinvitesyourwritten commentsandsuggestions.RATIONALE THIS DETAIL SPECIFICATION SHEET IS REQUIRED TO STANDARDIZE COMMERCIAL CONNECTOR ACCESSORIES FOR USER APPLICATIONS. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL

6、CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS85049. FIGURE 1 - ACCESSORY CONFIGURATION AND DIMENSIONS AS85049/145 SHEET 1 OF 4 PROCUREMENT SPECIFICATION: AS85049 SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AS85049_145

7、TABLE 1 - SHELL SIZE AND DIMENSIONS ACCESSORY SHELL SIZE CODE MAX. ALLOWABLE ENTRY SIZE (SEE TABLE 2) AS81703 SERIES III SHELL SIZE (REF) MIL-DTL-26482 SERIES II & MIL-DTL-83723 SERIES III SHELL SIZE (REF) AS50151 SERIES II & III SHELL SIZE (REF) AS95234 SHELL SIZE (REF) A MAX DIAMETER G MAX H MAX S

8、ELF LOCKING NON-SELF LOCKING 03 03 3 - - - .885 (22.48) .669 (16.99) 1.00 (25.40) 1.05 (26.67) 08 03 - 8 8S - .885 (22.48) .617 (15.67) 1.00 (25.40) 1.05 (26.67) 10 04 - 10 10S & 10SL 10SL 1.010 (25.65) .734 (18.64) 1.02 (25.91) 1.07 (27.18) 12 06 7 12 12S & 12 - 1.135 (28.83) .858 (21.79) 1.05 (26.

9、67) 1.10 (27.94) 14 08 12 14 14S & 14 14S 1.260 (32.00) .984 (24.99) 1.06 (26.92) 1.11 (28.19) 16 10 19 16 16S & 16 16S & 16 1.385 (35.18) 1.112 (28.24) 1.09 (27.69) 1.14 (28.96) 18 12 27 18 18 18 1.510 (38.35) 1.218 (30.94) 1.11 (28.19) 1.15 (29.21) 20 12 37 20 20 20 1.635 (41.53) 1.345 (34.16) 1.1

10、3 (28.70) 1.18 (29.97) 22 16 - 22 22 22 1.760 (44.70) 1.468 (37.29) 1.16 (29.46) 1.21 (30.73) 24 16 - 24 24 24 1.885 (47.88) 1.593 (40.46) 1.18 (29.97) 1.23 (31.24) 28 24 - - 28 28 2.135 (54.23) 1.969 (50.01) 1.23 (31.24) 1.40 (35.56) 32 28 - - 32 32 2.395 (60.83) 2.219 (56.36) 1.28 (32.51) 1.45 (36

11、.83) 36 28 - - 36 36 2.635 (66.93) 2.469 (62.71) 1.33 (33.78) 1.49 (37.85) 40 32 - - 40 - 2.885 (73.28) 2.719 (69.06) 1.37 (34.80) 1.60 (40.64) 44 32 - - 44 - 3.135 (79.63) 2.969 (75.41) 1.42 (36.07) 1.65 (41.91) 48 40 - - 48 - 3.385 (85.98) 3.219 (81.76) 1.47 (37.34) 1.76 (44.70) 61 16 61 - - - 1.8

12、85 (47.88) 1.653 (41.99) 1.19 (30.23) 1.24 (31.50) TABLE 2 - CABLE ENTRY DIMENSIONS ENTRY SIZE J (REFERENCE) K THREAD L WIRE BUNDLE ACCOMMODATION MAX. 1/ 03 .44 (11.18) .500-28 UNEF-2B .250 ( 6.4) 04 .625-24 UNEF-2B .312 ( 7.9) 06 .750-20 UNEF-2B .438 (11.1) 08 .875-20 UNEF-2B .562 (14.3) 10 1.000-2

13、0 UNEF-2B .625 (15.9) 12 1.188-18 UNEF-2B .750 (19.1) 16 1.438-18 UNEF-2B .938 (23.8) 20 .50 (12.70) 1.750-18 UNS-2B 1.250 (31.8) 24 .56 (14.22) 2.000-18 UNS-2B 1.375 (34.9) 28 .56 (14.22) 2.250-16 UN-2B 1.625 (41.3) 32 .62 (15.75) 2.500-16 UN-2B 1.875 (47.6) 40 .68 (17.27) 3.000-16 UN-2B 2.375 (60.

14、3) 1/ WIRE BUNDLE ACCOMMODATION DIMENSION IS DEFINED AS THE ENVELOPE AREA OF THE WIRE BUNDLE. THIS DIMENSION IS NOT MEANT TO DEFINE THE HARDWARE LIMITS. AEROSPACE STANDARD AS85049/145 SHEET 2 OF 4 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 45 DEGREE, NON-SELF LOCKING AND SELF LOCKING, MS “V” THREA

15、D, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, AS50151 SERIES II & III, AS81703 SERIES III, MIL-DTL-26482 SERIES II AND AS95234 CONNECTORS) TABLE 3 - MATERIAL AND FINISH FIGURE 1 MATERIAL FINISH CODE ADAPTER BODY AND COUPLING NUT ALUMINUM ALLOY IN ACCORDANCE WITH AS85049 N 1/, W 2/, X, Y, Z 2/ CORROS

16、ION RESISTANT STEEL IN ACCORDANCE WITH AS85049 B 2/, S, XS, YS, ZS 2/ 1/ N FINISH NOT RECOMMENDED FOR USE IN APPLICATIONS THAT MAY BE SUSCEPTIBLE TO SALT WATER CORROSION. 2/ W, B, Z, AND ZS FINISHES NOT RECOMMENDED FOR USE IN APPLICATIONS THAT MAY BE SUSCEPTIBLE TO OUT GASSING (ALSO SEE SPECIFICATIO

17、N NOTES). REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS85049. 1. DESIGN: THE CONNECTOR ACCESSORY SHALL BE DESIGNED IN ACCORDANCE WITH FIGURE 1 AND TABLES 1 AND 2. THE ACCESSORY SHALL CONSIST OF A COUPLING NUT AND ADAPTER BODY. DIMENSIONS ARE IN INCHES AND A

18、PPLY AFTER PLATING. METRIC EQUIVALENTS ARE GIVEN FOR GENERAL INFORMATION ONLY AND ARE BASED ON 1 INCH = 25.4 MM. ACCESSORY CONFIGURATION IS OPTIONAL WITHIN THE DIMENSIONAL ENVELOPE SPECIFIED IN FIGURE 1. FOR INTERFACE DIMENSIONS, SEE AS85049 FIGURE 4 OR 4A. 2. COMPONENTS: THE COUPLING NUT SHALL BE C

19、APTIVATED TO THE ADAPTER BODY, FREE TO ROTATE, AND CAN BE SELF LOCKING OR NON-SELF LOCKING. 3. QUALIFICATION: AS85049 CATEGORY 3B. 4. PART NUMBER: SEE EXAMPLE BELOW EXAMPLE: M85049 /145 S 16 W 08 BASIC PART NUMBER SPECIFICATION SHEET COUPLING NUT STYLE CODE - (DASH) = NON-SELF LOCKING S = DETENTED S

20、ELF LOCKING (WITH POSITIVE AUDIBLE DETENT) N = NON-DETENTED SELF LOCKING ACCESSORY SHELL SIZE CODE (SEE TABLE 1) FINISH CODE (SEE TABLE 3) ENTRY SIZE (SEE TABLE 2) APPLICATION NOTES: 1. ACCOMMODATES ACCESSORIES WITH MS “V” THREADS SUCH AS AS85049/1, /2, /41, AND /42. 2. FOR INSTALLATION TORQUE, REFE

21、R TO AIR6151. AEROSPACE STANDARD AS85049/145 SHEET 3 OF 4 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 45 DEGREE, NON-SELF LOCKING AND SELF LOCKING, MS “V” THREAD, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, AS50151 SERIES II & III, AS81703 SERIES III, MIL-DTL-26482 SERIES II AND AS95234 CONNECTORS)

22、SPECIFICATION NOTES: NOTICE THIS DOCUMENT REFERENCES A PART WHICH CONTAINS CADMIUM AS A PLATING MATERIAL. CONSULT LOCAL OFFICIALS IF YOU HAVE QUESTIONS CONCERNING CADMIUMS USE. 1. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIO

23、NS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDI

24、TORIAL CHANGES ONLY. AEROSPACE STANDARD AS85049/145 SHEET 4 OF 4 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 45 DEGREE, NON-SELF LOCKING AND SELF LOCKING, MS “V” THREAD, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, AS50151 SERIES II & III, AS81703 SERIES III, MIL-DTL-26482 SERIES II AND AS95234 CONNECTORS)