SAE AS 85049 24C-2013 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL NONENVIRONMENTAL 90 SHIELD TERMINATION CATEGORY 3A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERIES 3 AND M.pdf

1、AEROSPACE STANDARD (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90, SHIELD TERMINATION, CATEGORY 3A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)AS85049/24Copyright 2013 SAE International All rights reserved. No part of

2、this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-7

3、76-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 1998-08REAFFIRMED 2004-11 REVISED 2013-12THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.CFEDERAL SUPPLY CLASS 5935 AS85049/24SHEET 1 OF 9REV. CPROCUREMENT SPECIFICATION: AS85049SAE Tech

4、nical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe solerespo

5、nsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised, reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/techni

6、cal/standards/AS85049/24CRATIONALE REVISION IS REQUIRED TO CORRECT THE DIMENSIONAL DESIGNATION FOR DIMENSION “B”, THE CORRECT DIMENSIONAL DESIGNATION IS “D”. THE COMPONENT DRAWING FOR STYLE 2 WAS INADVERTENTLY LEFT OFF AND HAS BEEN INCLUDED IN THIS REVISION. NOTICE THE COMPLETE REQUIREMENTS FOR PROC

7、URING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS85049. FIGURE 1 - CONFIGURATION AND DIMENSIONS AEROSPACE STANDARD AS85049/24SHEET 2 OF 9REV. C(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90, SHIELD TERMINATION, CATEGORY 3A (FOR AS501

8、51 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)FIGURE 1 - CONFIGURATION AND DIMENSIONS (CONTINUED) TABLE 1 - DIMENSIONS DASH NO. FITS SHELL OF CONNECTOR CLAMP SIZE AWIRE BUNDLE ACCOMMODATION RANGE (SEE NOTE 6) STYLE BDIM. .125 (3.2) CDIM. (REF.) DDIA. MAX

9、. AS81703 SERIES 3 MIL-DTL-26482SERIES 2 AS50151 CRIMP MIL-DTL-83723SERIESIII MIN MAX 134.125(3.2) .250(6.4) 11.800(45.7) 1.027(26.1) .669(17.0) 2 6 .250(6.4) .437(11.1) 21.320(33.5) 1.027(26.1) .669(17.0) 3 8 8S 8 4 .125(3.2) .250(6.4) 11.200(30.5) 1.027(26.1) .617(15.7) 410 10S, 10SL 10 4.125(3.2)

10、 .312(7.9) 11.920(48.8) 1.027(26.1) .734(18.6) 5 6 .250(6.4) .375(9.5) 11.320(33.5) 1.027(26.1) .734(18.6) 67 12 12, 12S 12 4.125(3.2) .312(7.9) 11.940(49.3) 1.027(26.1) .858(21.8) 7 6 .250(6.4) .437(11.1) 11.940(49.3) 1.027(26.1) .858(21.8) 8 10 .350(8.9) .500(12.7) 11.335(33.9) 1.027(26.1) .858(21

11、.8) 912 14 14, 14S 14 6.250(6.4) .437(11.1) 12.010(51.1) 1.027(26.1) .984(25.0) 10 10 .350(8.9) .575(14.6) 11.655(42.0) 1.027(26.1) .984(25.0) 11 19 16 16, 16S 16 6 .250(6.4) .437(11.1) 12.100(53.3) 1.027(26.1) 1.112(28.2) 12 12 .500(12.7) .700(17.8) 11.745(44.3) 1.059(26.9) 1.112(28.2) 13 27 18 18

12、18 10 .350(8.9) .625(15.9) 12.270(57.7) 1.027(26.1) 1.218(30.9) 14 16 .625(15.9) .779(19.8) 11.920(48.8) 1.156(29.4) 1.218(30.9) AEROSPACE STANDARD AS85049/24SHEET 3 OF 9REV. C(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90, SHIELD TERMINATION, CATEGORY 3A (FOR AS50151 CRIMP,

13、MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE 1 - DIMENSIONS (CONTINUED)DASH NO.EDIM.125 (3.2) V THREAD CLASS 2A FDIM.MAX. GDIA.MAX. HDIM.MAX. 1.636 (16.2) .625-24 UNEF 1.18 (30.0) -1.57 (39.9) 21.386 (35.2) .750-20 UNEF 2.02 (51.3) .858 (21.8) 2.41 (61.2) 3

14、.541 (13.7) .625-24 UNEF 1.09 (27.7) -1.48 (37.6) 4.636 (16.2) .625-24 UNEF 1.18 (30.0) -1.57 (39.9) 5.636 (16.2) .750-20 UNEF 1.27 (32.3) -1.66 (42.2) 6.641 (16.3) .625-24 UNEF 1.18 (30.0) -1.57 (39.9) 7.641 (16.3) .750-20 UNEF 1.28 (32.5) -1.67 (42.4) 8.641 (16.3) 1.000-20 UNEF 1.37 (34.8) -1.76 (

15、44.7) 9.741 (18.8) .750-20 UNEF 1.38 (35.1) -1.77 (45.0) 10 .741 (18.8) 1.000-20 UNEF 1.47 (37.3) -1.86 (47.2) 11 .926 (23.5) .750-20 UNEF 1.59 (40.4) -1.98 (50.3) 12 .926 (23.5) 1.187-18 UNEF 1.77 (45.0) -2.15 (54.6) 13 1.016 (25.8) 1.000-20 UNEF 1.80 (45.7) -2.19 (55.6) 14 1.016 (25.8) 1.437-18 UN

16、EF 1.97 (50.0) -2.36 (59.9) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. FITS SHELL OF CONNECTOR CLAMP SIZE AWIRE BUNDLE ACCOMMODATION RANGE (SEE NOTE 6) STYLE BDIM. .125 (3.2) CDIM. (REF.) DDIA. MAX. AS81703 SERIES 3 MIL-DTL-26482SERIES 2 AS50151 CRIMP MIL-DTL-83723SERIESIII MIN MAX 1537 20 20 20 10.3

17、50(8.9) .625(15.9) 12.270(57.7) 1.027(26.1) 1.345(34.2) 16 16 .625(15.9) .904(23.0) 11.920(48.8) 1.156(29.4) 1.345(34.2) 1722 22 22 12.500(12.7) .750(19.1) 12.380(60.5) 1.059(26.9) 1.468(37.3) 18 20 .875(22.2) 1.029(26.1) 12.025(51.4) 1.375(34.9) 1.468(37.3) 1924 24 24 12.500(12.7) .750(19.1) 12.380

18、(60.5) 1.069(27.2) 1.593(40.5) 20 20 .875(22.2) 1.144(29.1) 12.025(51.4) 1.375(34.9) 1.593(40.5) 212816.625(15.9) .937(23.8) 12.550(64.8) 1.156(29.4) 1.969(50.0) 22 24 1.000(24.4) 1.375(34.9) 12.195(55.8) 1.500(38.1) 1.969(50.0) 233216.625(15.9) .937(23.8) 12.800(71.1) 1.156(29.4) 2.219(56.4) 24 20

19、.875(22.2) 1.250(31.8) 12.800(71.1) 1.375(34.9) 2.219(56.4) 25 28 1.250(31.8) 1.625(41.3) 12.445(62.1) 1.781(45.2) 2.219(56.4) 263616.625(15.9) .937(23.8) 12.770(70.4) 1.156(29.4) 2.469(62.7) 27 24 1.000(24.5) 1.375(34.9) 12.770(70.4) 1.500(38.1) 2.469(62.7) 28 32 1.437(36.5) 1.840(46.7) 12.415(61.3

20、) 1.830(46.5) 2.469(62.7) AEROSPACE STANDARD AS85049/24SHEET 4 OF 9REV. C(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90, SHIELD TERMINATION, CATEGORY 3A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE 1 - DIMENSIONS

21、(CONTINUED)DASH NO.EDIM.125 (3.2) V THREAD CLASS 2A FDIM.MAX. GDIA.MAX. HDIM.MAX. 15 1.016 (25.8) 1.000-20 UNEF 1.80 (45.7) -2.19 (55.6) 16 1.016 (25.8) 1.437-18 UNEF 1.97 (50.0) -2.36 (59.9) 17 1.166 (29.6) 1.187-18 UNEF 2.11 (53.6) -2.50 (63.5) 18 1.166 (29.6) 1.750-18 UNS 2.29 (58.2) -2.68 (68.1)

22、 19 1.166 (29.6) 1.187-18 UNEF 2.11 (53.6) -2.50 (63.5) 20 1.166 (29.6) 1.750-18 UNS 2.29 (58.2) -2.68 (68.1) 21 1.266 (32.2) 1.437-18 UNEF 2.33 (59.2) -2.88 (73.2) 22 1.266 (32.2) 2.000-18 UNS 2.51 (63.8) -3.06 (77.7) 23 1.616 (41.0) 1.437-18 UNEF 2.81 (71.4) -3.36 (85.3) 24 1.616 (41.0) 1.750-18 U

23、NS 2.81 (71.4) -3.36 (85.3) 25 1.816 (46.1) 2.250-16 UN 3.07 (78.0) -3.62 (91.9) 26 1.816 (46.1) 1.437-18 UNEF 3.13 (79.5) -3.68 (93.5) 27 1.816 (46.1) 2.000-18 UNS 3.13 (79.5) -3.68 (93.5) 28 2.566 (65.2) 2.500-16 UN 3.39 (86.1) -3.94 (100.1) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. FITS SHELL OF

24、CONNECTOR CLAMP SIZE AWIRE BUNDLE ACCOMMODATION RANGE (SEE NOTE 6) STYLE BDIM. .125 (3.2) CDIM. (REF.) DDIA. MAX. AS81703 SERIES 3 MIL-DTL-26482SERIES 2 AS50151 CRIMP MIL-DTL-83723SERIESIII MIN MAX 294016.625(15.9) .937(23.8) 12.770(70.4) 1.156(29.4) 2.719(69.1) 30 24 1.000(25.4) 1.375(34.9) 12.770(

25、70.4) 1.500(38.1) 2.719(69.1) 31 32 1.437(36.5) 1.875(47.6) 12.415(61.3) 1.830(46.5) 2.719(69.1) 324416.625(15.9) .937(23.8) 12.770(70.4) 1.156(29.4) 2.969(75.4) 33 24 1.000(25.4) 1.375(34.9) 12.770(70.4) 1.500(38.1) 2.969(75.4) 34 32 1.437(36.5) 1.875(47.6) 12.415(61.3) 1.830(46.5) 2.969(75.4) 3548

26、16.625(15.9) .937(23.8) 12.770(70.4) 1.156(29.4) 3.219(81.8) 36 24 1.000(25.4) 1.375(34.9) 12.770(70.4) 1.500(38.1) 3.219(81.8) 37 32 1.437(36.5) 1.875(47.6) 12.415(61.3) 1.830(46.5) 3.219(81.8) 386112.500(12.7) .750(19.1) 12.380(60.5) 1.059(26.9) 1.653(42.0) 39 20 .875(22.2) 1.184(30.1) 12.025(51.4

27、) 1.375(34.9) 1.653(42.0) 40 19 16 16, 16S 16 10 .350(8.9) .625(15.9) 12.100(53.3) 1.027(26.1) 1.112(28.2) 4127 18 18 18 4.125(3.2) .312(7.9) 12.270(57.7) 1.027(26.1) 1.218(30.9) 42 6 .250(6.4) .437(11.1) 12.270(57.7) 1.027(26.1) 1.218(30.9) AEROSPACE STANDARD AS85049/24SHEET 5 OF 9REV. C(R) CONNECT

28、OR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90, SHIELD TERMINATION, CATEGORY 3A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE 1 - DIMENSIONS (CONTINUED) DASH NO.EDIM.125 (3.2) V THREAD CLASS 2A FDIM.MAX. GDIA.MAX. HDIM.MAX. 2

29、9 2.566 (65.2) 1.437-18 UNEF 3.88 (98.6) -4.43 (112.5) 30 2.566 (65.2) 2.000-18 UNS 3.88 (98.6) -4.43 (112.5) 31 2.566 (65.2) 2.500-16 UN 4.14 (105.2) -4.69 (119.1) 32 2.566 (65.2) 1.437-18 UNEF 3.88 (98.6) -4.43 (112.5) 33 2.566 (65.2) 2.000-18 UNS 3.88 (98.6) -4.43 (112.5) 34 2.566 (65.2) 2.500-16

30、 UN 4.14 (105.2) -4.69 (119.1) 35 2.566 (65.2) 1.437-18 UNEF 3.88 (98.6) -4.43 (112.5) 36 2.566 (65.2) 2.000-18 UNS 3.88 (98.6) -4.43 (112.5) 37 2.566 (65.2) 2.500-16 UN 4.14 (105.2) -4.69 (119.1) 38 1.166 (29.6) 1.187-18 UNEF 2.11 (53.6) -2.50 (63.5) 39 1.166 (29.6) 1.750-18 UNS 2.29 (58.2) -2.68 (

31、68.1) 40 .926 (23.5) 1.000-20 UNEF 1.66 (42.2) -2.05 (52.1) 41 1.016 (25.8) .625-24 UNEF 1.80 (45.7) -2.19 (55.6) 42 1.016 (25.8) .750-20 UNEF 1.80 (45.7) -2.19 (55.6) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. FITS SHELL OF CONNECTOR CLAMP SIZE AWIRE BUNDLE ACCOMMODATION RANGE (SEE NOTE 6) STYLE BDI

32、M. .125 (3.2) CDIM. (REF.) DDIA. MAX. AS81703 SERIES 3 MIL-DTL-26482SERIES 2 AS50151 CRIMP MIL-DTL-83723SERIESIII MIN MAX 43 37 20 20 20 6 .250(6.4) .437(11.1) 12.270(57.7) 1.027(26.1) 1.345(34.2) 4422 22 22 4.125(3.2) .312(7.9) 12.380(60.1) 1.027(26.1) 1.468(37.3) 45 6 .250(6.4) .437(11.1) 12.380(6

33、0.1) 1.027(26.1) 1.468(37.3) 46 24 24 24 10 .350(8.9) .625(15.9) 12.380(60.1) 1.027(26.1) 1.593(40.5) 47 36 12.500(12.7) .750(19.1) 12.770(70.1) 1.059(26.9) 2.469(62.7) 48 40 12 .500(12.7) .750(19.1) 12.770(70.1) 1.059(26.9) 2.719(69.1) 49 10 10S, 10SL 10 6 .250(6.4) .437(11.1) 21.940(49.3) 1.027(26

34、.1) .734(18.6) 50 12 14 14, 14S 14 12 .500(12.7) .750(19.1) 22.270(57.7) 1.059(26.9) .984(25.0) 51 19 16 16, 16S 16 16 .625(15.9) .937(23.8) 22.380(60.1) 1.156(29.4) 1.112(28.2) 52 27 18 18 18 12 .500(12.7) .750(19.1) 12.270(57.7) 1.059(26.9) 1.218(30.9) 53 61 16 .625(15.9) .937(23.8) 12.025(51.4) 1

35、.156(29.4) 1.653(42.0) 5437 20 20 20 12.500(12.7) .750(19.1) 12.270(57.7) 1.059(26.9) 1.345(34.2) 55 20 .875(22.2) 1.250(31.8) 22.550(64.8) 1.375(34.9) 1.345(34.2) 56 22 22 22 10 .350(8.9) .625(15.9) 12.380(60.1) 1.027(26.1) 1.468(37.3) AEROSPACE STANDARD AS85049/24SHEET 6 OF 9REV. C(R) CONNECTOR AC

36、CESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90, SHIELD TERMINATION, CATEGORY 3A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE 1 - DIMENSIONS (CONTINUED)DASH NO.EDIM.125 (3.2) V THREAD CLASS 2A FDIM.MAX. GDIA.MAX. HDIM.MAX. 43 1.01

37、6 (25.8) .750-20 UNEF 1.80 (45.7) -2.19 (55.6) 44 1.166 (29.6) .625-24 UNEF 2.11 (53.6) -2.50 (63.5) 45 1.166 (29.6) .750-20 UNEF 2.11 (53.6) -2.50 (63.5) 46 1.166 (29.6) 1.000-20 UNEF 2.11 (53.6) -2.50 (63.5) 47 1.816 (46.1) 1.187-18 UNEF 3.13 (79.5) -3.68 (93.5) 48 1.816 (46.1) 1.187-18 UNEF 3.88

38、(98.6) -4.43 (112.5) 49 1.381 (35.1) .750-20 UNEF 2.03 (51.6) .858 (21.8) 2.42 (61.5) 50 1.766 (44.9) 1.187-18 UNEF 2.61 (66.3) 1.218 (30.9) 3.00 (76.2) 51 1.916 (48.7) 1.437-18 UNEF 2.87 (72.9) 1.468 (37.3) 3.26 (82.8) 52 1.016 (25.8) 1.187-18 UNEF 1.86 (47.2) -2.25 (57.2) 53 1.166 (29.6) 1.437-18

39、UNEF 2.14 (54.4) -2.25 (57.2) 54 1.016 (25.8) 1.187-18 UNEF 1.86 (47.2) -3.53 (89.7) 55 2.016 (51.2) 1.750-18 UNS 3.14 (79.8) 1.969 (50.0) 2.50 (57.2) 56 1.166 (29.6) 1.000-20 UNEF 2.11 (53.6) -2.51 (63.8) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. FITS SHELL OF CONNECTOR CLAMP SIZE AWIRE BUNDLE ACCO

40、MMODATION RANGE (SEE NOTE 6) STYLE BDIM. .125 (3.2) CDIM. (REF.) DDIA. MAX. AS81703 SERIES 3 MIL-DTL-26482SERIES 2 AS50151 CRIMP MIL-DTL-83723SERIESIII MIN MAX 5722 22 22 16.625(15.9) .937(23.8) 12.380(60.5) 1.156(29.4) 1.468(37.3) 58 20 .875(22.2) 1.250(31.8) 22.550(64.8) 1.375(34.9) 1.468(37.3) 59

41、 24 24 24 16 .625(15.9) .937(23.8) 12.380(60.5) 1.156(29.4) 1.593(40.5) 602812.500(12.7) .750(19.1) 12.550(64.8) 1.059(26.9) 1.969(50.0) 61 20 .875(22.2) 1.250(31.8) 12.550(64.8) 1.375(34.9) 1.969(50.0) 62 32 24 1.000(25.4) 1.375(34.9) 12.800(71.1) 1.500(38.1) 2.219(56.4) 633620.875(22.2) 1.250(31.8

42、) 12.770(70.4) 1.375(34.9) 2.469(62.7) 64 28 1.250(31.8) 1.625(41.3) 12.770(70.4) 1.781(45.2) 2.469(62.7) 654020.875(22.2) 1.250(31.8) 12.770(70.4) 1.375(34.9) 2.719(69.1) 66 28 1.250(31.8) 1.625(41.3) 12.770(70.4) 1.781(45.2) 2.719(69.1) 674420.875(22.2) 1.250(31.8) 12.770(70.4) 1.375(34.9) 2.969(7

43、5.4) 68 28 1.250(31.8) 1.625(41.3) 12.770(70.4) 1.781(45.2) 2.969(75.4) 694820.875(22.2) 1.250(31.8) 12.770(70.4) 1.375(34.9) 3.219(81.8) 70 28 1.250(31.8) 1.625(41.3) 12.770(70.4) 1.781(45.2) 3.219(81.8) AEROSPACE STANDARD AS85049/24SHEET 7 OF 9REV. C(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL

44、, NONENVIRONMENTAL, 90, SHIELD TERMINATION, CATEGORY 3A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE 1 - DIMENSIONS (CONTINUED) DASH NO.EDIM.125 (3.2) V THREAD CLASS 2A FDIM.MAX. GDIA.MAX. HDIM.MAX. 57 1.166 (29.6) 1.437-18 UNEF 2.12 (53

45、.8) -2.51 (63.8) 58 2.016 (51.2) 1.750-18 UNS 3.14 (79.8) 1.969 3.53 (89.7) 59 1.166 (29.6) 1.437-18 UNEF 2.14 (54.4) -2.53 (64.3) 60 1.266 (32.2) 1.187-18 UNEF 2.33 (59.2) -2.88 (73.2) 61 1.266 (32.2) 1.750-18 UNS 2.39 (60.7) -2.94 (74.7) 62 1.616 (41.0) 2.000-18 UNS 2.86 (72.6) -3.41 (86.6) 63 1.8

46、16 (46.1) 1.750-18 UNS 3.13 (79.5) -3.68 (93.5) 64 1.816 (46.1) 2.250-16 UN 3.27 (83.1) -3.82 (97.0) 65 2.566 (65.2) 1.750-18 UNS 3.88 (98.6) -4.43 (112.5) 66 2.566 (65.2) 2.250-16 UN 4.02 (102.1) -4.57 (116.1) 67 2.566 (65.2) 1.750-18 UNS 3.88 (98.6) -4.43 (112.5) 68 2.566 (65.2) 2.250-16 UN 4.02 (

47、102.1) -4.57 (116.1) 69 2.566 (65.2) 1.750-18 UNS 3.88 (98.6) -4.43 (112.5) 70 2.566 (65.2) 2.250-16 UN 4.02 (102.1) -4.57 (116.1) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. FITS SHELL OF CONNECTOR CLAMP SIZE AWIRE BUNDLE ACCOMMODATION RANGE (SEE NOTE 6) STYLE BDIM. .125 ( 3.2) CDIM. (REF.) DDIA. MAX

48、. AS81703 SERIES 3 MIL-DTL-26482SERIES 2 AS50151 CRIMP MIL-DTL-83723SERIESIII MIN MAX 71 7 12 12, 12S 12 10 .350(8.9) .625(15.9) 22.100(53.3) 1.027(26.1) .858(21.8) 72 27 18 18 18 16 .625(15.9) .937(23.8) 22.380(60.5) 1.156(29.4) 1.218(30.9) 73 24 24 24 20 .875(22.2) 1.250(31.8) 22.550(64.8) 1.375(3

49、4.9) 1.593(40.5) 74 12 14 14, 14S 14 4 .125(3.2) .312(7.9) 12.010(51.1) 1.027(26.1) .984(25.0) 75 19 16 16, 16S 16 4 .125(3.2) .312(7.9) 12.100(53.3) 1.027(26.1) 1.112(28.2) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO.EDIM.125 (3.2) V THREAD CLASS 2A FDIM.MAX. GDIA.MAX. HDIM.MAX. 71 1.686 (42.8) 1.000-20 UNEF 2.42 (61.5) 1.112 (28.2) 2.81 (71.4) 72 1.925 (48.9) 1.437-18 UNEF 2.88 (73.2) 1.468 (37.3) 3.27 (83.1) 73 2.026 (51.5) 1.750-18 UNS 3.15 (80.0) 1.969 (50.0) 3.54 (89.9) 74 .741 (18.8) .625-24 UNEF 1.31 (33.3) -1.70 (43.2) 75 .926 (23.5) .625-24 UNEF