SAE AS 85049 7B-2011 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING 45 CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERIES 3 AND MIL-DTL-83.pdf

1、AEROSPACE STANDARD CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) AS85049/7Copyright 2011 SAE International All rights reserved. No part of this publica

2、tion may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: 724-776-4970 (outsid

3、e USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2001-07REVISED 2011-01THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.BFEDERAL SUPPLY CLASS 5935 AS85049/7SHEET 1 OF 9REV. BPROCUREMENT SPECIFICATION: AS85049SAE Technical Standards Board Rules provide

4、 that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews ea

5、chtechnicalreport at least every five years at which time itmay bereaffirmed, revised, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS85049/7BRATIONALE THIS REVISION

6、 IS REQUIRED TO INCORPORATE THE OUTSTANDING AMENDMENT AND UPDATE TO MEET SAE FORMAT GUIDELINES. NOTICE THE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION SHEET AND THE LATEST ISSUE OF SAE AS85049. FIGURE 1 - CONFIGURATION AND DIMENSIONS Copyright SAE Inte

7、rnational Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/7SHEET 2 OF 9REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-264

8、82 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) FIGURE 1 - CONFIGURATION AND DIMENSIONS (CONTINUED) TABLE 1 - DIMENSIONS 1 4 .125 (3.18) .250 (6.35) 1 1.790 (45.47) 1.027 (26.09)2 6 .250 (6.35) .437 (11.10) 2 1.910 (48.51) 1.027 (26.09)3 8 8S 8 4 .125 (3.18) .250 (6.35) 1 1.1

9、82 (30.02) 1.027 (26.09)4 4 .125 (3.18) .312 (7.92) 1 1.850 (46.99) 1.027 (26.09)5 6 .250 (6.35) .375 (9.53) 1 1.245 (31.62) 1.027 (26.09)6 4 .125 (3.18) .312 (7.92) 1 1.910 (48.51) 1.027 (26.09)7 6 .250 (6.35) .437 (11.10) 1 1.910 (48.51) 1.027 (26.09)8 10 .350 (8.89) .500 (12.70) 1 1.910 (48.51) 1

10、027 (26.09)9 6 .250 (6.35) .437 (11.10) 1 2.000 (50.80) 1.027 (26.09)10 10 .350 (8.89) .575 (14.61) 1 1.655 (42.04) 1.027 (26.09)11 6 .250 (6.35) .437 (11.10) 1 2.110 (53.59) 1.027 (26.09)12 12 .500 (12.70) .700 (17.78) 1 1.750 (44.45) 1.059 (26.90)13 10 .350 (8.89) .625 (15.88) 1 2.300 (58.42) 1.0

11、27 (26.09)14 16 .625 (15.88) .779 (19.79) 1 1.938 (49.23) 1.156 (29.36)15 10 .350 (8.89) .625 (15.88) 1 2.300 (58.42) 1.027 (26.09)16 16 .625 (15.88) .904 (22.96) 1 1.938 (49.23) 1.156 (29.36)37 20 20 20141618 18 18271912 12, 12S1416, 16S1614,14SDASHNOAS81703 SERIES 3MIL-DTL-26482 SERIES 2AS50151 Cr

12、impCONNECTOR SHELL SIZEMAXMIN712C RefB .125Clamp SizeStyleA (See note 6)WIRE BUNDLE ACCOMMODATION RANGE12MIL-DTL-83723Series IIIN/A N/A3N/A10 10S, 10SL 10N/ACopyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IH

13、S-,-,-AEROSPACE STANDARD AS85049/7SHEET 3 OF 9REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) TABLE 1 - DIMENSIONS (CONTINUED) TABLE 1 - DIMENSIONS

14、 (CONTINUED) DASHNO.CONNECTOR SHELL SIZE CLAMPSIZE A (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES 3MIL-DTL-26482SERIES 2 AS50151 CRIMP MIL-DTL-83723SERIES III WIRE BUNDLE ACCOMMODATION RANGEMIN MAX 17N/A 22 22 22 12 .500 (12.70) .750 (19.05) 1 2.450 (62.23) 1.059 (26.90) 18 20 .875 (22.23) 1.029 (

15、26.14) 1 2.093 (53.16) 1.375 (34.93) 19N/A 24 24 24 12 .500 (12.70) .750 (19.05) 1 2.450 (62.23) 1.059 (26.90) 20 20 .875 (22.23) 1.144 (29.06) 1 2.093 (53.16) 1.375 (34.93) 21N/A N/A 28N/A 16 .625 (15.88) .937 (23.80) 1 2.500 (63.50) 1.156 (29.36) 22 24 1.000 (25.40) 1.375 (34.93) 1 2.156 (54.76) 1

16、500 (38.10) 233216 .625 (15.88) .937 (23.80) 1 2.600 (66.04) 1.156 (29.36) 24 20 .875 (22.23) 1.250 (31.75) 1 2.600 (66.04) 1.375 (34.93) 25 28 1.250 (31.75) 1.625 (41.28) 1 2.250 (57.15) 1.781 (45.24) 263616 .625 (15.88) .937 (23.80) 1 2.690 (68.33) 1.156 (29.36) 27 24 1.000 (25.40) 1.375 (34.93)

17、1 2.690 (68.33) 1.500 (38.10) 28 32 1.437 (36.50) 1.840 (46.74) 1 2.344 (59.54) 1.830 (46.48) 294016 .625 (15.88) .937 (23.80) 1 2.690 (68.33) 1.156 (29.36) 30 24 1.000 (25.40) 1.375 (34.93) 1 2.690 (68.33) 1.500 (38.10) 31 32 1.437 (36.50) 1.875 (47.63) 1 2.344 (59.54) 1.830 (46.48) DASHNO. D DIA M

18、AX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 1 .669 (16.99) .561 (14.25) .625-24 UNEF 3.37 ( 85.60) 3.74 ( 95.00) 2 .669 (16.99) 1.375 (34.93) .750-20 UNEF 4.33 (109.98) .858 (21.79) 4.70 (119.38) 3 .617 (15.67) .500 (12.70) .625-24 UNEF 2.88 ( 73.15) 3.25 ( 82.55) 4 .734 (18.64) .561 (14.25) .

19、625-24 UNEF 3.41 ( 86.61) 3.78 ( 96.01) 5 .734 (18.64) .561 (14.25) .750-20 UNEF 3.05 ( 77.47) 3.42 ( 86.87) 6 .858 (21.79) .625 (15.88) .625-24 UNEF 3.52 ( 89.41) 3.89 ( 98.81) 7 .858 (21.79) .625 (15.88) .750-20 UNEF 3.58 ( 90.93) 3.95 (100.33) 8 .858 (21.79) .625 (15.88) 1.000-20 UNEF 3.86 ( 98.0

20、4) 4.23 (107.44) 9 .984 (24.99) .688 (17.48) .750-20 UNEF 3.71 ( 94.23) 4.08 (103.63) 10 .984 (24.99) .688 (17.48) 1.000-20 UNEF 3.74 ( 95.00) 4.11 (104.39) 11 1.112 (28.24) .781 (19.84) .750-20 UNEF 3.88 ( 98.55) 4.25 (107.95) 12 1.112 (28.24) .781 (19.84) 1.1875-18 UNEF 4.03 (102.36) 4.40 (111.76)

21、 13 1.218 (30.94) .968 (24.59) 1.000-20 UNEF 4.48 (113.79) 4.85 (123.19) 14 1.218 (30.94) .968 (24.59) 1.4375-18 UNEF 4.49 (114.05) 4.86 (123.44) 15 1.345 (34.16) .968 (24.59) 1.000-20 UNEF 4.48 (113.79) 4.85 (123.19) 16 1.345 (34.16) .968 (24.59) 1.4375-18 UNEF 4.49 (114.05) 4.86 (123.44) Copyright

22、 SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/7SHEET 4 OF 9REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45, CATEGORY 1A (FOR AS50151 CRIMP, MI

23、L-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) TABLE 1 - DIMENSIONS (CONTINUED) DASHNO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 17 1.468 (37.29) 1.063 (27.00) 1.1875-18 UNEF 4.81 (122.17) 5.18 (131.57) 18 1.468 (37.29) 1.063 (27.00) 1.750-18 UNS 4.9

24、8 (126.49) 5.35 (135.89) 19 1.593 (40.46) 1.063 (27.00) 1.1875-18 UNEF 4.81 (122.17) 5.18 (131.57) 20 1.593 (40.46) 1.063 (27.00) 1.750-18 UNS 4.98 (126.49) 5.35 (135.89) 21 1.969 (50.01) 1.188 (30.18) 1.4375-18 UNEF 5.11 (129.79) 5.64 (143.26) 22 1.969 (50.01) 1.188 (30.18) 2.000-18 UNS 5.09 (129.2

25、9) 5.62 (142.75) 23 2.219 (56.36) 1.250 (31.75) 1.4375-18 UNEF 5.24 (133.10) 5.77 (146.56) 24 2.219 (56.36) 1.250 (31.75) 1.750-18 UNS 5.52 (140.21) 6.05 (153.67) 25 2.219 (56.36) 1.250 (31.75) 2.250-16 UN 5.73 (145.54) 6.26 (159.00) 26 2.469 (62.71) 1.281 (32.54) 1.4375-18 UNEF 5.33 (135.38) 5.86 (

26、148.84) 27 2.469 (62.71) 1.281 (32.54) 2.000-18 UNS 5.56 (141.22) 6.09 (154.69) 28 2.469 (62.71) 1.281 (32.54) 2.500-16 UN 5.95 (151.13) 6.48 (164.59) 29 2.719 (69.06) 2.031 (51.59) 1.4375-18 UNEF 6.08 (154.43) 6.61 (167.89) 30 2.719 (69.06) 2.031 (51.59) 2.000-18 UNS 6.31 (160.27) 6.84 (173.74) 31

27、2.719 (69.06) 2.031 (51.59) 2.500-16 UN 6.70 (170.18) 7.23 (183.64) TABLE 1 - DIMENSIONS (CONTINUED) DASHNO.CONNECTOR SHELL SIZE CLAMPSIZE A (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES 3MIL-DTL-26482SERIES 2AS50151 CRIMP MIL-DTL-83723SERIES III WIRE BUNDLE ACCOMMODATION RANGEMIN MAX 32N/A N/A 44N

28、/A 16 .625 (15.88) .937 (23.80) 1 2.690 (68.33) 1.156 (29.36) 33 24 1.000 (25.40) 1.375 (34.93) 1 2.690 (68.33) 1.500 (38.10) 34 32 1.437 (36.50) 1.875 (47.63) 1 2.344 (59.54) 1.830 (46.48) 354816 .625 (15.88) .937 (23.80) 1 2.690 (68.33) 1.156 (29.36) 36 24 1.000 (25.40) 1.375 (34.93) 1 2.690 (68.3

29、3) 1.500 (38.10) 37 32 1.437 (36.50) 1.875 (47.63) 1 2.344 (59.54) 1.830 (46.48) 3861 N/A 12 .500 (12.70) .750 (19.05) 1 2.450 (62.23) 1.059 (26.90) 39 20 .875 (22.23) 1.184 (30.07) 1 2.093 (53.16) 1.375 (34.93) 40 19 16 16, 16S 16 10 .350 ( 8.89) .625 (15.88) 1 2.110 (53.59) 1.027 (26.09) 4127 18 1

30、8 18 4 .125 ( 3.18) .312 ( 7.92) 1 2.300 (58.42) 1.027 (26.09) 42 6 .250 ( 6.35) .437 (11.10) 1 2.300 (58.42) 1.027 (26.09) 43 37 20 20 20 6 .250 ( 6.35) .437 (11.10) 1 2.300 (58.42) 1.027 (26.09) 44N/A 22 22 22 4 .125 ( 3.18) .312 ( 7.92) 1 2.450 (62.23) 1.027 (26.09) 45 6 .250 ( 6.35) .437 (11.10)

31、 1 2.450 (62.23) 1.027 (26.09) 46 24 24 24 10 .350 ( 8.89) .625 (15.88) 1 2.450 (62.23) 1.027 (26.09) Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/7SHEET 5 OF 9REV. BCON

32、NECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) TABLE 1 - DIMENSIONS (CONTINUED) DASHNO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 32 2.969 (

33、75.41) 2.031 (51.59) 1.437-18 UNEF 6.08 (154.43) 6.61 (167.89) 33 2.969 (75.41) 2.031 (51.59) 2.000-18 UNS 6.31 (160.27) 6.84 (173.74) 34 2.969 (75.41) 2.031 (51.59) 2.500-16 UN 6.70 (170.18) 7.23 (183.64) 35 3.219 (81.76) 2.031 (51.59) 1.437-18 UNEF 6.08 (154.43) 6.61 (167.89) 36 3.219 (81.76) 2.03

34、1 (51.59) 2.000-18 UNS 6.31 (160.27) 6.84 (173.74) 37 3.219 (81.76) 2.031 (51.59) 2.500-16 UN 6.70 (170.18) 7.23 (183.64) 38 1.653 (41.99) 1.063 (27.00) 1.1875-18 UNEF 4.81 (122.17) 5.18 (131.57) 39 1.653 (41.99) 1.063 (27.00) 1.750-18 UNS 4.98 (126.49) 5.35 (135.89) 40 1.112 (28.24) .781 (19.84) 1.

35、000-20 UNEF 4.16 (105.66) 4.53 (115.06) 41 1.218 (30.94) .968 (24.59) .625-24 UNEF 4.13 (104.90) 4.50 (114.30) 42 1.218 (30.94) .968 (24.59) .750-20 UNEF 4.20 (106.68) 4.57 (116.08) 43 1.345 (34.16) .968 (24.59) .750-20 UNEF 4.20 (106.68) 4.57 (116.08) 44 1.468 (37.29) 1.063 (27.00) .625-24 UNEF 4.3

36、4 (110.24) 4.71 (119.63) 45 1.468 (37.29) 1.063 (27.00) .750-20 UNEF 4.40 (111.76) 4.77 (121.16) 46 1.593 (40.46) 1.063 (27.00) 1.000-20 UNEF 4.68 (118.87) 5.05 (128.27) TABLE 1 - DIMENSIONS (CONTINUED) DASHNO.CONNECTOR SHELL SIZE CLAMPSIZE A (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES 3MIL-DTL-2

37、6482SERIES 2AS50151 CRIMP MIL-DTL-83723SERIES III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 47N/A N/A 36N/A 12 .500 (12.70) .750 (19.05) 1 2.690 (68.33) 1.059 (26.90) 48 40 12 .500 (12.70) .750 (19.05) 1 2.690 (68.33) 1.059 (26.90) 49 10 10S,10SL 10 6 .250 ( 6.35) .437 (11.10) 2 1.910 (48.51) 1.027 (2

38、6.09) 50 12 14 14, 14S 14 12 .500 (12.70) .750 (19.05) 2 2.300 (58.42) 1.059 (26.90) 51 19 16 16, 16S 16 16 .625 (15.88) .937 (23.80) 2 2.450 (62.23) 1.156 (29.36) 52 27 18 18 18 12 .500 (12.70) .750 (19.05) 1 2.300 (58.42) 1.059 (26.90) 53 61 N/A N/A N/A 16 .625 (15.88) .937 (23.80) 1 2.450 (62.23)

39、 1.156 (29.36) 5437 20 20 20 12 .500 (12.70) .750 (19.05) 1 2.300 (58.42) 1.059 (26.90) 55 20 .875 (22.23) 1.250 (31.75) 2 2.500 (63.50) 1.375 (34.93) 56N/A 22 22 22 10 .350 ( 8.89) .625 (15.88) 1 2.450 (62.23) 1.027 (26.09) 57 16 .625 (15.88) .937 (23.80) 1 2.450 (62.23) 1.156 (29.36) 58 20 .875 (2

40、2.23) 1.250 (31.75) 2 2.500 (63.50) 1.375 (34.93) 59 24 24 24 16 .625 (15.88) .937 (23.80) 1 2.450 (62.23) 1.156 (29.36) 60 N/A 28 N/A 12 .500 (12.70) .750 (19.05) 1 2.500 (63.50) 1.059 (26.90) Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or network

41、ing permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/7SHEET 6 OF 9REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) TABLE 1- DIMENSI

42、ONS (CONTINUED) DASHNO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 47 2.469 (62.71) 1.281 (32.54) 1.1875-18 UNEF 5.20 (132.08) 5.73 (145.54) 48 2.719 (69.06) 2.031 (51.59) 1.1875-18 UNEF 5.95 (151.13) 6.48 (164.59) 49 .734 (18.64) 1.375 (34.93) .750-20 UNEF 4.33 (109.98) .858 (21.79) 4

43、70 (119.38) 50 .984 (24.99) 1.717 (43.61) 1.1875-18 UNEF 5.36 (136.14) 1.218 (30.94) 5.73 (145.54) 51 1.112 (28.24) 1.812 (46.02) 1.4375-18 UNEF 5.70 (144.78) 1.468 (37.29) 6.07 (154.18) 52 1.218 (30.94) .968 (24.59) 1.1875-18 UNEF 4.61 (117.09) 4.98 (126.49) 53 1.653 (41.99) 1.063 (27.00) 1.4375-1

44、8 UNEF 4.95 (125.73) 5.32 (135.13) 54 1.345 (34.16) .968 (24.59) 1.1875-18 UNEF 4.61 (117.09) 4.98 (126.49) 55 1.345 (34.16) 1.963 (49.86) 1.750-18 UNS 6.14 (155.96) 1.969 (50.01) 6.51 (165.35) 56 1.468 (37.29) 1.063 (27.00) 1.000-20 UNEF 4.68 (118.87) 5.05 (128.27) 57 1.468 (37.29) 1.063 (27.00) 1.

45、4375-18 UNEF 4.95 (125.73) 5.32 (135.13) 58 1.468 (37.29) 1.936 (49.17) 1.750-18 UNS 6.14 (155.96) 1.969 (50.01) 6.51 (165.35) 59 1.593 (40.46) 1.063 (27.00) 1.4375-18 UNEF 4.95 (125.73) 5.32 (135.13) 60 1.969 (50.01) 1.188 (30.18) 1.1875-18 UNEF 4.97 (126.24) 5.50 (139.70) TABLE 1 - DIMENSIONS (CON

46、TINUED) DASHNO.CONNECTOR SHELL SIZE CLAMPSIZE A (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES 3 MIL-DTL-26482SERIES 2 AS50151 CRIMP MIL-DTL-83723SERIES III WIRE BUNDLE ACCOMMODATION RANGEMIN MAX 61N/A N/A 28N/A 20 .875 (22.23) 1.250 (31.75) 1 2.500 (63.50) 1.375 (34.93) 62 32 24 1.000 (25.40) 1.375

47、 (34.93) 1 2.600 (66.04) 1.500 (38.10) 633620 .875 (22.23) 1.250 (31.75) 1 2.690 (68.33) 1.375 (34.93) 64 28 1.250 (31.75) 1.625 (41.28) 1 2.690 (68.33) 1.781 (45.24) 654020 .875 (22.23) 1.250 (31.75) 1 2.690 (68.33) 1.375 (34.93) 66 28 1.250 (31.75) 1.625 (41.28) 1 2.690 (68.33) 1.781 (45.24) 67442

48、0 .875 (22.23) 1.250 (31.75) 1 2.690 (68.33) 1.375 (34.93) 68 28 1.250 (31.75) 1.625 (41.28) 1 2.690 (68.33) 1.781 (45.24) 694820 .875 (22.23) 1.250 (31.75) 1 2.690 (68.33) 1.375 (34.93) 70 28 1.250 (31.75) 1.625 (41.28) 1 2.690 (68.33) 1.781 (45.24) 71 7 12 12, 12S 12 10 .350 ( 8.89) .625 (15.88) 2 2.110 (53.59) 1.027 (26.09) 72 27 18 18 18 16 .625 (15.88) .937 (23.80) 2 2.450 (62.23) 1.156 (29.36) 73 N/A 24 24 24 20 .875 (22.23) 1.250 (31.75) 2 2.500 (63.50) 1.375 (34.93) 74 12 14 14, 14S 14 4 .125 ( 3.18) .312 ( 7.92) 1 2.000 (50.