SAE AS 9552C-2011 Bracket Flat Cres UNS S32100《耐蚀钢UNS S32100平底船支架》.pdf

1、AEROSPACE STANDARD (R) BRACKET, FLAT, CRES UNS S32100 AS9552Copyright 2011 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, wi

2、thout the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 1998-02REVISED 2011-02THIRD ANGLE PROJECTION CUSTODIAN: E-25 RE

3、V.CFEDERAL SUPPLY CLASS 5340 AS9552SHEET 1 OF 3REV. CPROCUREMENT SPECIFICATION: NONESAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits applicability and suitabilit

4、y forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay bereaffirmed, revised, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To

5、 provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS9552CRATIONALE EDITORIAL CHANGES - RESTORE PREFERRED SIZES AND EXPLANATORY FOOTNOTE TO TABLE 1 IN ACCORDANCE WITH THE ORIGINAL INTENT OF MS9552A. FIX TYPOGRAPHICAL ERRORS IN TABLE 1 AND TABLE 2 FIGURE 1 B

6、RACKET TABLE 1 BOLT SIZES AND DIMENSIONS PART NUMBER NOMINAL BOLT SIZE A B C D APPROX. MASS LB/100 MS9552-004 THRU MS9552-045 .1900 X .1900 .200 - .210 .195 - .205 .200 - .210 .195 - .205 .878 L + .197 MS9552-105 THRU MS9552-145 .1900 X .2500 .200 - .210 .195 - .205 .260 - .270 .225 - .235 .878 L +

7、.184 MS9552-206 THRU MS9552-245 .2500 X .2500 .260 - .270 .225 - .235 .260 - .270 .225 - .235 .878 L + .172 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS9552SHEET 2 OF 3REV. C

8、(R) BRACKET, FLAT, CRES UNS S32100 TABLE 2 PART NUMBERS AND LENGTHS (L) DIMENSIONS LLENGTH BOLT .1900 X .1900 BOLT .1900 X .2500 BOLT .2500 X .2500 PART NUMBER PART NUMBER PART NUMBER .615 - .635 *MS9552-004 .678 - .698 *MS9552-005 *MS9552-105 .740 - .760 *MS9552-006 *MS9552-106 *MS9552-206 .802 - .

9、822 *MS9552-007 *MS9552-107 *MS9552-207 .865 - .885 *MS9552-008 *MS9552-108 *MS9552-208 .928 - .948 *MS9552-009 *MS9552-109 *MS9552-209 .990 1.010 *MS9552-010 *MS9552-110 *MS9552-210 1.052 1.072 MS9552-011 MS9552-111 MS9552-211 1.115 1.135 *MS9552-012 *MS9552-112 *MS9552-212 1.178 1.198 MS9552-013 M

10、S9552-113 MS9552-213 1.240 1.260 *MS9552-014 *MS9552-114 *MS9552-214 1.302 1.322 MS9552-015 MS9552-115 MS9552-215 1.365 1.385 *MS9552-016 *MS9552-116 *MS9552-216 1.428 1.448 MS9552-017 MS9552-117 MS9552-217 1.490 1.510 *MS9552-018 *MS9552-118 *MS9552-218 1.552 1.572 MS9552-019 MS9552-119 MS9552-219

11、1.615 1.635 *MS9552-020 *MS9552-120 *MS9552-220 1.678 1.698 MS9552-021 MS9552-121 MS9552-221 1.740 1.760 *MS9552-022 *MS9552-122 *MS9552-222 1.802 1.822 MS9552-023 MS9552-123 MS9552-223 1.865 1.885 *MS9552-024 *MS9552-124 *MS9552-224 1.928 1.948 MS9552-025 MS9552-125 MS9552-225 1.990 2.010 *MS9552-0

12、26 *MS9552-126 *MS9552-226 2.052 2.072 MS9552-027 MS9552-127 MS9552-227 2.115 2.135 *MS9552-028 *MS9552-128 *MS9552-228 2.178 2.198 MS9552-029 MS9552-129 MS9552-229 2.240 2.260 *MS9552-030 *MS9552-130 *MS9552-230 2.302 2.322 MS9552-031 MS9552-131 MS9552-231 2.365 2.385 *MS9552-032 *MS9552-132 *MS955

13、2-232 2.428 2.443 MS9552-033 MS9552-133 MS9552-233 2.490 2.510 *MS9552-034 *MS9552-134 *MS9552-234 2.552 2.572 MS9552-035 MS9552-135 MS9552-235 2.615 2.635 *MS9552-036 *MS9552-136 *MS9552-236 2.678 2.698 MS9552-037 MS9552-137 MS9552-237 2.740 2.760 *MS9552-038 *MS9552-138 *MS9552-238 2.802 2.822 MS9

14、552-039 MS9552-139 MS9552-239 2.865 2.885 *MS9552-040 *MS9552-140 *MS9552-240 2.928 2.948 MS9552-041 MS9552-141 MS9552-241 2.990 3.010 *MS9552-042 *MS9552-142 *MS9552-242 3.052 3.072 MS9552-043 MS9552-143 MS9552-243 3.115 3.135 *MS9552-044 *MS9552-144 *MS9552-244 3.178 3.198 MS9552-045 MS9552-145 MS

15、9552-245 * PREFERRED SIZES Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS9552SHEET 3 OF 3REV. C(R) BRACKET, FLAT, CRES UNS S32100 NOTES: 1. MATERIAL: CORROSION RESISTANT STEEL

16、PER AMS5510 (UNS S32100). 2. GRAIN FLOW SHALL BE PARALLEL WITH ROLLING DIRECTION. 3. REMOVE BURRS AND BREAK EDGES .003 TO .015 UNLESS OTHERWISE SPECIFIED. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982 (ASME PUBLICATION). 5. DIMENSIONS ARE IN INCHES. 6. DO NOT USE UNASSIGNED PART NUMBER. 7. A

17、CHANGE BAR (|) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLU

18、DING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY. AS AND AMS ARE SAE INTERNATIONAL PUBLICATIONS. ASME IS AN AMERICAN SOCIETY OF MECHANICAL ENGINEERS PUBLICATION. Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-