SAE J 1249-2008 Former SAE Standard and Former SAE Ex-Steels《较早SAE标准和较早SAE Ex-钢》.pdf

1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirelyvoluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefro

2、m, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright 2008 SAE InternationalAll rights reserved. No part of this publication may be

3、reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying,recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: 724-776-4970 (outside USA)Fax: 724-

4、776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSURFACEVEHICLEINFORMATIONREPORTJ1249REAF.DEC2008Issued 1983-06Reaffirmed 2008-12Superseding J1249 JUN2000Former SAE Standard and Former SAE Ex-Steels1. ScopeThis SAE Information Report provides a list of those SAE steels which, b

5、ecause of decreased usage,have been deleted from the standard SAE Handbook listings. Included are alloy steels from SAE J778deleted since 1936, carbon steels from SAE J118 deleted since 1952, and all EX-steels deleted from SAEJ1081. Information concerning SAE steels prior to these dates may be obtai

6、ned from the SAE office onrequest. With the issuance of this report, SAE J778, Formerly Standard SAE Alloy Steels, and SAE J118,Formerly Standard SAE Carbon Steels, will be retired since they are now combined in SAE J1249. In thefuture, new assignments to SAE J1081, Chemical Compositions of SAE Expe

7、rimental Steels, will be given“PS” (Potential Standard) numbers rather than “EX” numbers.The steels listed in Tables 1 and 2 are no longer considered as standard steels. Producers should becontacted concerning availability. Steel grades can be reinstated based on usage according to the critieriaindi

8、cated in SAE J403 and J404.The last column lists the date a steel was last listed as standard in the SAE Handbook. Where applicable, thecorresponding AISI and UNS numbers are given.2. References2.1 Applicable PublicationsThe following publications form a part of this specification to the extent spec

9、ifiedherein. Unless otherwise indicated, the latest issue of SAE publications shall apply.2.1.1 SAE PUBLICATIONSAvailable from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.SAE J1081Potential Standard SteelsSAE J118 CancelledFormerly Standard SAE Carbon SteelsSAE J778 CancelledFormerly Stan

10、dard SAE Alloy SteelsCopyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE J1249 Reaffirmed DEC2008-2-TABLE 1FORMER STANDARD SAE STEELS SAE No.UNS No.CMnP, Max(1)S,Max(1)SiCrNiMoV,MinAISI No.Date10090.

11、15 max0.60 max0.0400.050100919651011G101100.090.140.600.900.0400.050101119931019(2)G101900.150.200.701.000.0400.05010330.300.360.701.000.0400.0501033196510340.320.380.500.800.0400.050C103419681037(2)G103700.320.380.701.000.0400.0501059(2)0.550.650.500.800.0400.05019681059G105900.550.650.500.800.0400

12、.0501059199310620.540.650.851.150.0400.050C106219531064(2)G106400.600.700.500.800.0400.0501069(2)G106900.650.750.400.700.0400.0501074G107400.700.800.500.800.0400.050107419931075(2)G107500.700.800.400.700.0400.0501084(2)G108400.800.930.600.900.0400.0501085G108500.800.930.701.000.0400.0501086(2)G10860

13、0.800.940.300.500.0400.05019771108(2)G110800.080.130.500.800.0400.080.131109G110900.080.130.600.900.0400.080.13110919771110G111000.080.130.300.600.0400.080.131110199311110.13 max0.600.900.070.120.100.15B1111196911120.13 max0.701.000.070.120.160.23B1112196911130.13 max0.701.000.070.120.240.33B1113196

14、911140.100.161.001.300.0400.080.13C1114195211150.130.180.600.900.0400.080.131115196511160.140.201.101.400.0400.160.23C111619521119G111900.140.201.001.300.0400.240.331119197711200.180.230.701.000.0400.080.13112019651123G112300.200.271.201.500.0400.060.09112319931139(2)G113900.350.431.351.650.0400.130

15、.201145G114500.420.490.701.000.0400.040.07114519771152G115200.480.550.701.000.0400.060.09115219931211(2)G121100.13 max0.600.900.070.120.100.1513200.180.231.601.900.0400.0400.200.35A132019561330G133000.280.331.601.900.0350.0400.150.35133019931345G134500.430.481.601.900.0350.0400.150.351513G151300.100

16、.161.101.400.0400.050151319931518G151800.150.211.101.400.0400.05019771525G152500.230.290.801.100.0400.05019771533G153300.300.371.101.400.0400.050153319931534G153400.300.371.201.500.0400.050153419931536G153600.300.371.201.500.0400.0501544G154400.400.470.801.100.0400.050154419931545G154500.430.500.801

17、.100.0400.050154519931546G154600.440.521.001.300.0400.05015461993Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE J1249 Reaffirmed DEC2008-3-1551G155100.450.560.851.150.0400.0501553G155300.480.550

18、.801.100.0400.050155319931561G156100.550.650.751.050.0400.0501570G157000.650.750.801.100.0400.050157019931572G157200.650.761.001.300.0400.05019771580G158000.750.880.801.100.0400.050158019931590G159000.850.980.801.100.0400.0501590199323170.150.200.400.600.0400.0400.200.353.253.75A2317195623300.280.33

19、0.600.800.0400.0400.200.353.253.75A2330195323400.380.430.700.900.0400.0400.200.353.253.75A2340195323450.430.480.700.900.0400.0400.200.353.253.75A2345195225120.090.140.450.600.0250.0250.200.354.755.25E2512195325150.120.170.400.600.0400.0400.200.354.755.25A2515195625170.150.200.450.600.0250.0250.200.3

20、54.755.25E2517195931150.130.180.400.600.0400.0400.200.350.550.751.101.40A3115195331200.170.220.600.800.0400.0400.200.350.550.751.101.40A3120195631300.280.330.600.800.0400.0400.200.350.550.751.101.40A3130195631350.330.380.600.800.0400.0400.200.350.550.751.101.4031351960X31400.380.430.700.900.0400.040

21、0.200.350.700.901.101.40A3141194731400.380.430.700.900.0400.0400.200.350.550.751.101.403140196431450.430.480.700.900.0400.0400.200.350.700.901.101.40A3145195231500.480.530.700.900.0400.0400.200.350.700.901.101.40A3150195232150.100.200.300.600.0400.0500.150.300.901.251.502.00194132200.150.250.300.600

22、.0400.0500.150.300.901.251.502.00194132300.250.350.300.600.0400.0500.150.300.901.251.502.00194132400.350.450.300.600.0400.0400.150.300.901.251.502.00A3240194132450.400.500.300.600.0400.0400.150.300.901.251.502.00194132500.450.550.300.600.0400.0400.150.300.901.251.502.00194133100.080.130.450.600.0250

23、.0250.200.351.401.753.253.75E3310196433120.080.130.450.600.0250.0250.200.351.401.753.253.75194833160.140.190.450.600.0250.0250.200.351.401.753.253.75E3316195633250.200.300.300.600.0400.0500.150.301.251.753.253.75193633350.300.400.300.600.0400.0500.150.301.251.753.253.75193633400.350.450.300.600.0400

24、.0500.150.301.251.753.253.75193634150.100.200.300.600.0400.0500.150.300.600.952.753.25194134350.300.400.300.600.0400.0500.150.300.600.952.753.25193634500.450.550.300.600.0400.0500.150.300.600.952.753.2519364012G401200.090.140.751.000.0350.0400.150.300.150.25401219774024G402400.200.250.700.900.0350.0

25、350.0500.150.350.200.304028G402800.250.300.700.900.0350.0350.0500.150.35402819934032G403200.300.350.700.900.0350.0400.150.350.200.304042G404200.400.450.700.900.0350.0400.150.350.200.3040530.500.560.751.000.0400.0400.200.350.200.30405319564063G406300.600.670.751.000.0400.0400.200.350.200.304063196440

26、680.630.700.751.000.0400.0400.200.350.200.30A4068195741190.170.220.700.900.0400.0400.200.350.400.600.200.30A41191956TABLE 1FORMER STANDARD SAE STEELS (CONTINUED)SAE No.UNS No.CMnP, Max(1)S,Max(1)SiCrNiMoV,MinAISI No.DateCopyright SAE International Provided by IHS under license with SAENot for Resale

27、No reproduction or networking permitted without license from IHS-,-,-SAE J1249 Reaffirmed DEC2008-4-4121G412100.180.230.751.000.0350.0400.150.350.450.650.200.304121199341250.230.280.700.900.0400.0400.200.350.400.600.200.30A412519504131G413100.280.330.500.700.0350.0400.150.350.901.200.150.25413119934

28、135G413500.330.380.700.900.0350.0400.150.350.801.100.150.254147G414700.450.500.751.000.0350.0400.150.350.801.100.150.25414719934161G416100.560.640.751.000.0350.0400.150.350.700.900.250.3543170.150.200.450.650.0400.0400.200.350.400.601.652.000.200.30431719534337G433700.350.400.600.800.0400.0400.200.3

29、50.700.901.652.000.200.304337196444190.180.230.450.650.0350.0400.150.300.450.60452019774419H0.170.230.350.750.0350.0400.150.300.450.604419H19774422G442200.200.250.700.900.0350.0400.150.350.350.454427G442700.240.290.700.900.0350.0400.150.350.350.4546080.060.110.250.450.0400.0400.25 max1.401.750.150.2

30、54608195646B12(3)0.100.150.450.650.0400.0400.200.351.652.000.200.3046B1219574615G461500.130.180.450.650.0350.0400.150.351.652.000.200.304617G461700.150.200.450.650.0350.0400.150.351.652.000.200.30X46200.180.230.500.700.0400.0400.200.351.652.000.200.30X462019564621G462100.180.230.700.900.0350.0400.15

31、0.301.652.000.200.30462119774621H0.170.230.601.000.0350.0400.150.301.552.000.200.304621H19774626G462600.240.290.450.650.0350.0400.150.350.701.000.150.2546400.380.430.600.800.0400.0400.200.351.652.000.200.30A464019524715G471500.130.180.700.900.0350.0400.150.350.450.650.701.000.450.60471519934718G4718

32、00.160.210.700.900.350.550.901.200.300.404720G47200.170.220.500.700.0350.0400.150.350.350.550.901.200.150.254720199348120.100.150.400.600.0400.0400.200.353.253.750.200.30481719564815G481500.130.180.400.600.0350.0400.150.353.253.750.200.30481519934817G481700.150.200.400.600.0350.0400.150.353.253.750.

33、200.305015G501500.120.170.300.500.0350.0400.150.300.300.505015197750B40(3)B504010.380.430.751.000.0350.0400.150.350.400.6050B44(3)G504410.430.480.751.000.0350.0400.150.350.400.6050450.430.480.700.900.0400.0400.200.350.550.75504519535046G504600.430.480.751.000.0350.0400.150.350.200.3550B50(3)G505010.

34、480.530.751.000.0350.0400.150.350.400.605060G506000.560.640.751.000.0350.0400.150.350.400.6050B60(3)G506010.560.640.751.000.0350.0400.150.350.400.605115G511500.130.180.700.900.0350.0400.150.350.700.905117G511700.150.200.700.900.0400.0400.150.350.700.905135G513500.330.380.600.800.0350.0400.150.350.80

35、1.055145G514500.430.480.700.900.0350.0400.150.300.700.90514519775145HH514500.420.490.601.000.0350.0400.150.300.601.005145H19775147G514700.460.510.700.950.0350.0400.150.350.851.1551520.480.550.700.900.0400.0400.200.350.901.20515219565155G515500.510.590.700.900.0350.0400.150.350.700.9050100G509860.981

36、.100.250.450.0250.0250.150.350.400.60E51100G519860.981.100.250.450.0250.0250.150.350.901.15E51100199361150.100.200.300.600.0400.0500.150.300.801.100.151936TABLE 1FORMER STANDARD SAE STEELS (CONTINUED)SAE No.UNS No.CMnP, Max(1)S,Max(1)SiCrNiMoV,MinAISI No.DateCopyright SAE International Provided by I

37、HS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE J1249 Reaffirmed DEC2008-5-61170.150.200.700.900.0400.0400.200.350.700.900.10611719566118G611800.160.210.500.700.0350.0400.150.350.500.70V0.100.1561200.170.220.700.900.0400.0400.200.350.70

38、0.900.106120196161250.200.300.600.900.0400.0500.150.300.801.100.15193661300.250.350.600.900.0400.0500.150.300.801.100.15193661350.300.400.600.900.0400.0500.150.300.801.100.15194161400.350.450.600.900.0400.0500.150.300.801.100.15193661450.430.480.700.900.0400.0500.200.350.801.100.156145195661950.901.

39、050.200.450.0300.0350.150.300.801.100.151936713600.500.700.30 max0.0350.0400.150.303.004.0012.0015.00W1936716600.500.700.30 max0.0350.0400.150.303.004.0015.0018.00W193672600.500.700.30 max0.0350.0400.150.300.501.001.502.00W19368115G811500.130.180.700.900.0350.0400.150.350.300.500.200.400.080.1581B45

40、(3)G814510.430.480.751.000.0350.0400.150.350.350.550.200.400.080.158627G862700.250.300.700.900.0350.0400.150.350.400.600.400.700.150.2586320.300.350.700.900.0400.0400.200.350.400.600.400.700.150.258632195186350.330.380.751.000.0400.0400.200.350.400.600.400.700.150.25863519568637G863700.350.400.751.0

41、00.0350.0400.150.350.400.600.400.700.150.258637199386410.380.430.751.000.0400.040-0.0600.200.350.400.600.400.700.150.25864119568642G864200.400.450.751.000.0350.0400.150.350.400.600.400.700.150.2586B45(3)G864510.430.480.751.000.0350.0400.150.350.400.600.400.700.150.258650G865000.480.530.751.000.0350.

42、0400.150.350.400.600.400.700.150.2586530.500.560.751.000.0400.0400.200.350.500.800.400.700.150.258653195686470.450.500.751.000.0400.0400.200.350.400.600.400.700.150.25864719488655G865500.510.590.751.000.0350.0400.150.350.400.600.400.700.150.258660G866000.560.640.751.000.0350.0400.150.350.400.600.400

43、.700.150.2587150.130.180.700.900.0400.0400.200.350.400.600.400.700.200.308715195687170.150.200.700.900.0400.0400.200.350.400.600.400.700.200.308717195687190.180.230.600.800.0400.0400.200.350.400.600.400.700.200.30871919528735G873500.330.380.751.000.0400.0400.200.350.400.600.400.700.200.3087351952874

44、0G874000.380.430.751.000.0350.0400.150.350.400.600.400.700.200.308742G874200.400.450.751.000.0400.0400.200.350.400.600.400.700.200.308742196487450.430.480.751.000.0400.0400.200.350.400.600.400.700.200.308745195387500.480.530.751.000.0400.0400.200.350.400.600.400.700.200.308750195692500.450.550.600.9

45、00.0400.0401.802.20925019419255G925500.510.590.700.950.0350.0401.802.209255197792610.550.650.751.000.0400.0401.802.200.100.25926119569262G926200.550.650.751.000.0400.0401.802.200.250.40926219619310G931060.080.130.450.650.0250.0250.150.351.001.403.003.500.080.1593150.130.180.450.650.0250.0250.200.351.001.403.003.500.080.15E9