SAE MA 2036A-1992 CAP ASSEMBLY PRESSURE SEAL FLARELESS TUBE METRIC《公制FSC 4730 非扩口管的压力密封盖总成》.pdf

1、 AEROSPACE STANDARD CAP ASSEMBLY, PRESSURE SEAL, FLARELESS TUBE, METRIC MA2036Copyright 2015 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording

2、, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 1986-03REVISED 1992-12 REAFFIRMED 2015-04THIR

3、D ANGLE PROJECTION CUSTODIAN: G-3/G-3B REV.A FEDERAL SUPPLY CLASS 4730MA2036 SHEET 1 OF 4 REV. A PROCUREMENT SPECIFICATION: /4/ MA2005 (ISO 7169)SAE Technical Standards Board Rules provide that: “This report ispublished by SAE toadvance thestate of technicalandengineering sciences. Theuse ofthisrepo

4、rt is entirelyvoluntary, andits applicability and suitability forany particularuse,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised,reaffirmed, stabilized, orcancelled. SAE

5、 invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/MA2036A RATIONALE MA2036A HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. FIGURE 1 - CAP ASSEMBLYFIGURE 2 - CAP INSE

6、RTAEROSPACE STANDARD MA2036 SHEET 2 OF 4 REV. A CAP ASSEMBLY, PRESSURE SEAL, FLARELESS TUBE, METRIC TABLE 1A - DIMENSIONS A-FTABLE 1B - DIMENSIONS H-W AND WEIGHTSAEROSPACE STANDARD MA2036 SHEET 3 OF 4 REV. A CAP ASSEMBLY, PRESSURE SEAL, FLARELESS TUBE, METRIC NOTES:/1/ MATERIAL:a. WIRE ALL CODE LETT

7、ERS: CORROSION RESISTANT STEEL TYPE 302 PER ASTM A 493 OR CLASS 305 PER AMS 5685b. INSERT AND NUT:(1) NO CODE LETTER (HYPHEN):(a) INSERT: TYPE 1137 STEEL BAR PER ASTM A 108 OR TYPE 4130 STEEL BAR PER MIL-S-6758(b) NUT: NO CODE LETTER OF MA2040 REFERENCE (TYPE 1137 OR 4130 STEEL)(2) CODE LETTER D:(a)

8、 INSERT: TYPE 2024-T6 ALUMINUM ALLOY BAR PER AMS 4112 OR TYPE 2024-T851 ALUMINUM ALLOY BAR PER QQ-A-225/6.(b) NUT: CODE LETTER D OF MA2040 REFERENCE (TYPE 2024-T6 OR 2024-T851 ALUMINUM ALLOY)(3) CODE LETTER J:(a) INSERT: TYPE 304 CORROSION RESISTANT STEEL BAR PER QQ-S-763, CLASS 304(b) NUT: CODE LET

9、TER J OF MA2040 REFERENCE (TYPE 304 CORROSION RESISTANT STEEL)(4) CODE LETTER K:(a) INSERT: TYPE 316 CORROSION RESISTANT STEEL BAR PER QQ-S-763, CLASS 316(b) NUT: CODE LETTER K OF MA2040 REFERENCE (TYPE 316 CORROSION RESISTANT STEEL)(5) CODE LETTER R:(a) INSERT: TYPE 321 CORROSION RESISTANT STEEL BA

10、R PER QQ-S-763, CLASS 321(b) NUT: CODE LETTER R OF MA2040 REFERENCE (TYPE 321 CORROSION RESISTANT STEEL)(6) CODE LETTER S:(a) (INACTIVE FOR USE): tYPE 347 CORROSION RESISTANT STEEL BAR PER QQ-S-763, CLASS 347(b) NUT: CODE LETTER S OF MA 2040 REFERENCE (TYPE 347 CORROSION RESISTANT STEEL)(7) CODE LET

11、TER T:(a) INSERT: TYPE 6AL-4V TITANIUM ALLOY BAR PER AMS 4928(b) NUT: CODE LETTER T OF MA2040 REFERENCE (TYPE 6AL-4V TITANIUM ALLOY)(8) CODE LETTER W:(a) INSERT: TYPE 7075-T7351 ALUMINUM ALLOY BAR PER AMS 4124(b) NUT: CODE LETTER W OF MA2040 REFERENCE (TYPE 7075-T7351 ALUMINUM ALLOY)c. CODE S MATERI

12、AL MAY BE USED UNTIL STOCK IS DEPLETED, CODE R MATERIAL MAY BE SUBSTITUTED WHENEVER CODE S MATERIAL IS SPECIFIED.2. FINISH:a. WIRE, ALL MATERIAL CODE LETTERS: PASSIVATE PER QQ-P-35, TYPE IV OR VIIIb. INSERT AND NUT:(1) NO MATERIAL CODE LETTER (HYPHEN):(a) INSERT: CADMIUM PLATE PER QQ-P-416, TYPE II,

13、 CLASS 2. DIP IN OIL PER MIL-H-6083 OR MIL-H-46170(b) NUT: NO CODE LETTER OF MA2040 REFERENCE (CADMIUM PLATE AND OIL DIP)(2) MATERIAL CODE LETTERS D AND W:(a) INSERT: ANODIZE PER AMS 2471(b) NUT: CODE LETTERS D AND W OF MA2040 REFERENCE (ANODIZE)AEROSPACE STANDARD MA2036 SHEET 4 OF 4 REV. A CAP ASSE

14、MBLY, PRESSURE SEAL, FLARELESS TUBE, METRIC NOTES (Continued):(3) MATERIAL CODE LETTER J, K, R, AND S:(a) INSERT: PASSIVATE PER QQ-P-35, TYPE VI OR VII(b) NUT: CODE LETTERS J, K, R, OR S OF MA2040 REFERENCE (PASSIVATE)(4) MATERIAL CODE LETTER T:(a) INSERT: FLUORIDE PHOSPHATE COAT PER AMS 4928(b) NUT

15、: CODE LETTER W OF MA2040 REFERENCE (FLUORIDE PHOSPHATE COAT)/3/ DN = NOMINAL TUBE OUTSIDE DIAMETER/4/ PROCUREMENT SPECIFICATION: MA2005 (ISO 7169) THIS PART SHALL BE QUALIFIED TO THE PROCUREMENT SPECIFICATION AS APPLICABLE IN A COMPLETE ASSEMBLY. USERS OF THIS STANDARD ARE ADVISED TO CONTROL SOURCE

16、 APPROVAL(S) BY STANDARD PAGE SUPPLEMENT SHEET OR SIMILAR MEANS./5/ NUT SHALL BE IDENTIFIED WITH MANUFACTURERS NAME, TRADEMARK OR CAGE CODE, “MA2040” AND MATERIAL CODE LETTER.6. THIS PART IS DESIGNED FOR USE IN SYSTEMS AT TYPE II TEMPERATURE (-55 TO 135 C) WITH OPERATING PRESSURES AS FOLLOWS:a. ALL

17、SIZES TITANIUM ALLOY AND CORROSION RESISTANT STEEL AND SIZES -05 THROUGH -20 ALUMINUM ALLOY AT CLASS E (21 000 kPa)b. SIZES -25 AND -32 ALUMINUM ALLOY AT CLASS B (10 500 kPa)c. SIZE -40 ALUMINUM ALLOY AT CLASS A (4000 kPa)d. TYPE AND CLASSES PER MA2001 (ISO 6771)7. SURFACE TEXTURE: SYMBOLS PER ANSI

18、Y14.36; REQUIREMENTS PER ANSI/ASME B46.1. UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 3.2 m Ra.8. BREAK EDGES 0.1 TO 0.4 UNLESS OTHERWISE SPECIFIED.9. DIMENSIONING AND TOLERANCING: ANSI Y14.5M10. DIMENSIONS IN MILLIMETERS. UNLESS OTHERWISE SPECIFIED, TOLERANCES: LINEAR DIMENSIONS 0.3; ANGULAR DIMENSIONS 0.3./11/ EXAMPLE OF PART NUMBER: