SANS 10120-2 HE-1983 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2 Project specification Section HE Str.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. SABS 0120 : Part 2 Section HE4983 Structural alumlnlumwork PART 2 : PROJECT SPECIFICATION SECTION HE CONTENTS Clause Page Number 1. ESSENTIAL PROJECT SPE

4、CIFICATION CLAUSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. ESSENTIALDATA 1 3. ADDITIONAL CLAUSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3.1 General . 1 3.2 Normalprojects 1

5、 3.2.1 Contract for fabrication and delivery only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3.2.2 Testing . 1 November l983 Approved by the COUNCIL OF THE SOUTH AFRICAN BUREAU OF STANDARDS SABS 0120 : Part 2 Section HE-1 983 Structural aluminiumwor

6、k SABS 1200 HE : STRUCTURAL ALUMiNlUM NOTE a) Number PSHE clauses in Portion 2 of the project speciflcatlon in the sequence in which the clauses to which the relate appear in SABS 1200 HE. b) he clause number(s) given at the beglnnin or after the headlng of a clause Ware, unless otherwise stated, th

7、e number of the relevant clause(s) of SABS 1$OO HE. 1. ESSENTIAL PROJECT SPEClFlCATiON CLAUSES 1.1 Set out suitable clauses in Portion 2 of the project speclflcatlon to provide essential Information as follows: a) (Subclauses 3.1 and 3.2) State the designation and temper condition of the alloy to BS

8、 1474 or SABS 712“ required for structural members. b) (Subclause 3.3) State the designation and temper condition of the alloy to BS 1470) required for sheet, or strip, or plate, as applicable. c) (Subclause 3.5) State the designation and, when relevant, temper condition of the alloy to BS 1473)requ

9、ired for rivets. d) (Subclause 3.5) State the applicable service condition for the electroplating of bolts to SABS 78). e) (Subclause 3.5) If bolts, washers, and nuts of a material other than the alloy of the members to be olned and the alloys listed in Subclause 3.5 of SABS 1200 HE are acceptable,

10、state the details and the locations n which they may be used. C 9 (Subclause 5.3.5) Where so required, state that the rnembers are to be joined by means of rivets. 2. ESSENTIAL DATA 2.1 The availability of certain essential data may affect the rices tendered. Except where such data have been given i

11、n the schedule or in the tender drawings, set out suita detairdr&dngs, fatrica:ik, :ssembly of the structural aluminium members, and delive of the assembled structure to the site, ready for use or for erection by others, include a project specificaTon clause as follows: PSHE 1. MEASUREMENT AND PAYME

12、NT (Subclause 8.1). As the contract covers the rovision of a single item and covers goods that will be manufactured entirely at the suppliers works and tlat will be complete when delivered, provision has not been made in the schedule for prelimina and general charges. Thus, the stun tendered for Ite

13、m No. of the schedule shall cover the cost of all reYminary and general charges in addition to the cost of the Items and operations specified in Subclause 9).2 of SABS 1200 HE, with the exception of those specified in Subclause 8.2.3. 3.2.2 Testin (Subclause 7.1). it is preferable to state in the pr

14、oject specification what, if any, test certiflcates will be izi&ed. 1 Wrou ht aluminium and aluminium alloys for general engineering purposes - bars, extruded round tube and sections. 21 lumkium and aluminium alloys for wrou ht products. 3 Wrought aluminium and abminlum alloyskr general engineering purposes - plate, sheet and strip. 41 Wrought aluminium and alumlnlum alloys for general engineering purposes - rivet, bolt and screw stock. 5) Electroplated coatings of nickel and chromium. sabs pta