SANS 10120-4 HE-1983 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4 Typical schedule of quantities Secti.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. SADS 0120 : Part 4 Section HE-1983 structural aluminiumwork PART 4 : TYPICAL SCHEDULE OF QIJANTITIES SECTION HE CONTENTS Page Number SCHEDI JIE SECTION :

4、 STRUCTURAL ALUMINIUMWORK . 1 November 1983 Approved by the COUNCIL OF THE SOUTH AFRICAN BUREAU OF STANDARDS SABS 0120 : Part 4 Section HE-1983 Structural dluminiumwork SABS 1200 llE I GTRlK!TIlRAL ALilMlNJllMWORK NOTE (a) See Clause 5 of Section 0. (b) Clauses 1 and 2 of Section H are applicable to

5、 aluminium structures. (C) Subclause 8.2.2 of SABS 1200 All is generally applicable to structural aluminiumwork. For escalation pur- ! the SEIF! Payment refers indexes, except that Table R, Eolwnn AA6351 s Short description SECTION : STRUCTURAL ALUMINIUMWORK SUPPLY AND FABRICATION OF ALUMINIUM STRUC

6、TURAL a) Extruded sections, alloy designation 62610, condition TF: I-beams and channels. 80 mm to 200 mm wide I-beams and channels, over 200 mm wide Angles, leg length exceeding 80 mm Hollow sections, width or width across flats exceeding 40 mm and up to 100 mm h) Extruded sections, alloy designatio

7、n 6082, condition M: Angles, leg length up to 80 mm tlollow tubing, diameter up to 40 mm DELIVERY TO SITE Deliver all elements, frames, and towers, except A Extra-over item .2.1 for tower A ERECTION ON SITE Erect structures complete HD BOLTS Supply and install ID bolts 3LADDING Sides of main building Roof of main building uld be us Unit I for t Quan- tity Alumini Rate sum (See S I Price Wex. Amount tion HB) sabs pta