SANS 11377-2003 Textile floor coverings - Floor soiling - Test site set-up and soiling evaluation《铺地织物 地板污物 测试点设置及污物评价》.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ICS 59.080.60 ISBN 0-626-14278-4 SANS 11377:2003 Edition 1 ISO 11377:1997 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Textile floor coverings Floor soiling

4、 Test site set-up and soiling evaluation This national standard is the identical implementation of ISO 11377:1997 and is adopted with the permission of the International Organization for Standardization. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001

5、tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa 2003 SANS 11377:2003 Edition 1 ISO 11377:1997 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by STANSA SC 5110.04C, Textiles Physical te

6、st methods, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. AReference numberISO 11377:1997(E)INTERNATIONALSTANDARDISO11377First edition1997-12-15Textile floor coverings Floor soiling Test site set-up and soiling evaluationRevtements de s

7、ol textiles Encrassement tablissementdun emplacement dessai et valuationISO 11377:1997(E) ISO 1997All rights reserved. Unless otherwise specified, no part of this publication may be reproducedor utilized in any form or by any means, electronic or mechanical, including photocopying andmicrofilm, with

8、out permission in writing from the publisher.International Organization for StandardizationCase postale 56 CH-1211 Genve 20 SwitzerlandInternet centraliso.chX.400 c=ch; a=400net; p=iso; o=isocs; s=centralPrinted in SwitzerlandiiForewordISO (the International Organization for Standardization) is a wo

9、rldwidefederation of national standards bodies (ISO member bodies). The work ofpreparing International Standards is normally carried out through ISO technicalcommittees. Each member body interested in a subject for which a technicalcommittee has been established has the right to be represented on th

10、at committee.International organizations, governmental and non-governmental, in liaison withISO, also take part in the work. ISO collaborates closely with the InternationalElectrotechnical Commission (IEC) on all matters of electrotechnicalstandardization.Draft International Standards adopted by the

11、 technical committees are circulatedto the member bodies for voting. Publication as an International Standard requiresapproval by at least 75 % of the member bodies casting a vote.International Standard ISO 11377 was prepared by Technical CommitteeISO/TC 38, Textiles, Subcommittee SC 12, Textile flo

12、or coverings.Annex A of this International Standard is for information only.INTERNATIONAL STANDARD ISO ISO 11377:1997(E)1Textile floor coverings Floor soiling Testsite set-up and soiling evaluation1 ScopeThis International Standard specifies the procedure for setting up a test site fortextile floor

13、coverings and the procedure for evaluation of levels of soiling asmeasured by colour change.2 Normative referencesThe following standards contain provisions which, through reference in this textconstitute provisions of this International Standard. At the time of publication,the editions indicated we

14、re valid. All standards are subject to revision, andparties to agreements based on this International Standard are encouraged toinvestigate the possibility of applying the most recent editions of the standardsindicated below. Members of IEC and ISO maintain registers of currently validInternational

15、StandardsISO 105-A02:1993, Textiles Tests for colour fastness Part A02: Grey scale forassessing change in colour.ISO 105-J01: 1), Textiles Tests for colour fastness Part J01: Generalprinciples for the measurement of surface colour.ISO 1957:1986, Machine-made textile floor coverings Sampling and cutt

16、ingspecimens for physical tests.3 PrincipleSamples of textile floor covering are exposed to foot traffic at a controlled testsite and are evaluated for change in colour after a given level of soiling isreached. The textile floor coverings can be evaluated for soiling in-situ forintermediate assessme

17、nts and, after removal from the test site, for finalassessment._1) To be published. (Revision of ISO 105-J01:1989)ISO 11377:1997(E)ISO24 Test siteThe test site shall be remote from outside entrances and isolated from non-typical, greasy, oily or wet traffic. It shall consist of a level corridor of w

18、idth notmore than 1,5 m and not less than 1,3 m, with straight, non-turning traffic inboth directions, as shown in figure 1.The test site may be equipped with a photoelectric traffic counter positioned1,25 m above floor level.Dimensions in millimetresKey1 Buffer textile floor covering2 Test specimen

19、s3 Direction of trafficFigure 1 Test site layoutISOISO 11377:1997(E)3The test site shall not be in areas where people gather, such as those containingbulletin boards or vending machines. The floor shall be level and free fromirregularities. At least 2,5 m of buffer textile floor covering, free fromc

20、ontaminants and exhibiting minimum fibre shedding, shall be placed at eachend of the test textile floor covering.5 Test specimen preparationTextile floor coverings under test shall be sampled in accordance with ISO 1957and square test specimens shall be prepared having sides measuring(350 10) mm. Th

21、ey shall be placed in two lines along the length of the corridor(see figure 1). Buffer textile floor covering between 300 mm and 400 mm inwidth shall be attached to the sides of the test area, so as to fill the width of thecorridor. For each sample of floor covering there shall be at least two repli

22、catespecimens.6 Textile floor covering installationTextile floor coverings shall be installed in such a way that they ensure safetraffic. This is easily achieved with double faced pressure-sensitive adhesivetape. Alternatively, individual specimens may be mounted to a removable rigidor semi-rigid su

23、bstrate of size identical to the test specimens and inserted intothe test area.Where traffic crosses from hard flooring to textile floor covering and vice versa,the textile floor covering edge shall be secured with rubber, plastic or metaledging, or tape to prevent a tripping hazard. Care shall be t

24、aken to minimizetextile floor covering junctions where there are large differences in carpetthickness and other potential tripping hazards.NOTE If it is deemed beneficial to identify the site as one where a trial is in progress, it isrecommended that any safety signs which are used conform to ISO 38

25、64.When first installed, the test specimens shall be placed in alternating positions.For example, if there are two sets of replicate specimens, A and B, they shall beplaced AB/BA across the width of the test site; if there are three sets of replicatespecimens, A, B and C, they shall be placed AB/CA/

26、BC; and if there are four setsof replicate specimens, A, B, C and D they shall be placed AB/CD/BA/DC (seefigure 2).ISO 11377:1997(E)ISO4Figure 2 Examples of test specimen layouts7 Test procedure7.1 To ensure even soiling, systematic transfer of test specimens between linesshall take place every two

27、days, or after a predetermined number of trafficks,with specimens being rotated 90 in a clockwise direction, moved two placesdown the length of the corridor and moved to the other line. Replicate specimensshall be placed away from each other where possible within the test area (seefigure 2) to help

28、to assess whether even soiling has taken place.7.2 When the positions of the test specimens have been rotated they shall becleaned with a vacuum cleaner, using two double strokes i.e. twice backwardsand twice forwards, in order to give all parts of all specimens equal treatment, asfollows. The first

29、 two double strokes shall be made with the vacuum cleanersuction slot approximately 50 % on the buffer carpet and 50 % over the test area.Each subsequent series of strokes is made parallel to the first series with 50 %overlap, ending when the buffer strip at the other side is included in the overlap

30、ISOISO 11377:1997(E)57.3 Test specimens shall be trafficked until soiling has reached a predeterminedlevel for one of the sets of specimens which has been selected as a reference, aftera predetermined number of trafficks or after a fixed period of time.The predetermined soiling level is assessed to

31、 a grey scale level (e.g. level 3) orthe colour difference measured instrumentally. Alternatively, a standard orcontrol specimen may be included in every test and compared with presoiledsamples of the standard or control specimen which are held in the laboratory.8 EvaluationPrior to evaluation the s

32、pecimens shall be suction cleaned in accordance with theprocedure described in 7.2.The soiling level of each test specimen shall be assessed using at least one of thefollowing techniquesa) colour measurement device described in ISO 105-J01;b) grey scales and procedure described in ISO 105-A02;c) vis

33、ual comparative ranking.When using colour measurements, colour change shall be expressed as thedifference between the soiled specimen and the untrafficked control.NOTE Caution should be employed when measuring colour difference, since pile flatteningand the method of introducing the test specimen to

34、 the instrument can profoundly influenceresults.9 Test reportThe test report shall include the following information:a) all the information necessary for complete identification of the textilefloor coverings being tested;b) a reference to this International Standard;c) the purpose of the test;d) a d

35、escription of the test site with lay-out of test specimens at the startand at the completion of the test;e) the rotation and transfer procedure (7.1);f) a description of the maintenance procedure (including type of vacuumcleaner used);ISO 11377:1997(E)ISO6g) the predetermined level to which one of t

36、he sets of test specimens wassoiled, the number of trafficks or the length of time test specimenswere on the floor;h) the method(s) of evaluation;i) the test results;j) additional information which may have affected the results, e.g.relative humidity and temperature measurements of the test siteduring the test period;k) a statement that the results obtained are valid only within the testsite;l) the date of the test.ISOISO 11377:1997(E)7Annex A(informative)Bibliography1 ISO 3864:1984, Safety colours and safety signs.