SANS 1360-2-2008 Size designation of clothes Part 2 Women-s and girls- outerwear garments《服装的尺码标示 第2部分 女式和女童外衣》.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21167-7 SANS 1360-2:2008Edition 1.2Any reference to SABS 1360-2 is deemedto be a reference to this standard(Government Notice No. 1373 of

4、8 November 2002)SOUTH AFRICAN NATIONAL STANDARD Size designation of clothes Part 2: Womens and girls outerwear garments Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Stan

5、dards South Africa SANS 1360-2:2008 Edition 1.2 Table of changes Change No. Date Scope Amdt 1 1984 Amended to change its category from a SABS standard specification to a SABS specification. Amdt 2 2008 Amended to change the designation of SABS standards to SANS standards, with no technical changes.

6、Foreword This South African standard was approved by National Committee StanSA SC 5110.05A, Clothing and made-up articles Clothing, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This document was published in March 2008. This document s

7、upersedes SABS 1360-2:1982 (edition 1). Preface This part of the specification has been prepared under the direction of the SABS Clothing Committee. It is, in technical content, identical to ISO 3637. The specification is one of a series which deals essentially with the size designation of clothes,

8、and is not directly concerned with sizing systems as such. The primary aim of this specification is, as in the other specifications in the series, to establish a size designation system that is based on body measurements, and that indicates (in a simple, direct, and meaningful manner) the body size

9、of the person that a garment is intended to fit. Provided that the shape of the persons body (as indicated by the appropriate dimensions) has been accurately determined, this system will facilitate the choice of garments that fit. Choice of garment measurements is normally left to the designer and t

10、he manufacturers, who are concerned with the style, cut, and other fashion elements, and who must make due allowance for garments normally worn beneath a specific outer garment or accessory. SANS 1360-2:2008 Edition 1.2 1 Contents Page Foreword Preface 1 Scope . 32 Definitions 33 Control dimensions

11、44 Size designation . 45 Labelling . 5Appendix A Applicable standards 9Appendix B Examples of outerwear garments 9SANS 1360-2:2008 Edition 1.2 2 This page is intentionally left blank SANS 1360-2:2008 Edition 1.2 3 Size designation of clothes Part 2: Womens and girls outerwear garments 1 Scope 1.1 Th

12、is part of the specification establishes a system of designating the sizes of womens and girls outerwear garments (including knitwear and swimwear) that are classified as a) covering the upper or the whole body, or b) covering the lower body only, and applies to both civilian and uniform garments. B

13、oth the control dimensions on which the size designation system is based, and the method of indicating the size designation on a garment label, are specified. NOTE a) The standards referred to in this part of the specification are listed in appendix A. b) Examples of garments covered by this part of

14、 the specification are given in appendix B. 2 Definitions 2.1 For the purposes of this part of the specification the relevant definitions given in SANS 10184 and the following definitions shall apply: girl a female person whose growth in height is not yet complete standard pictogram a pictogram symb

15、ol used to indicate the position on the body of the relevant control dimensions (see figure 1) woman a female person whose growth in height is complete SANS 1360-2:2008 Edition 1.2 4 3 Control dimensions 3.1 The control dimensions shall be as follows: a) Womens garments covering the upper or the who

16、le body: Other than knitwear and swimwear Knitwear Swimwear 1) Bust girth Bust girth Bust girth 2) Hip girth Hip girth 3) Height b) Womens garments covering the lower body only: 1) Hip girth 2) Waist girth 3) Outside leg length c) Girls garments covering the upper or the whole body: Other than knitw

17、ear and swimwear Knitwear Swimwear 1) Height Bust girth Bust girth 2) Bust girth Height Hip girth 3) Hip girth d) Girls garments covering the lower body only: 1) Height 2) Hip girth 3) Waist girth 4 Size designation 4.1 General The size designation of each garment shall comprise the appropriate cont

18、rol dimensions (see 3.1), in centimetres, of the intended wearer of that garment. Where practicable, the standard pictogram shall be used as a means of indicating the size designation. Where it is not practicable to use the standard pictogram, the numerical values of the control dimensions shall be

19、given together with the appropriate descriptive words such as height, hip girth, etc., in the order in which they are given in 3.1. NOTE The above requirements shall not preclude the use, in exceptional instances, of a) size designations comprising only one or two of the applicable control dimension

20、s; b) size designations shown as a range by stating the minimum and maximum control dimensions separated by an oblique stroke or a hyphen. SANS 1360-2:2008 Edition 1.2 5 4.2 Use of the standard pictogram 4.2.1 The minimum size of the pictogram is not specified but it shall be large enough to convey

21、immediate understanding, and to allow the use of readily legible numerals. NOTE The recommended type for use on pictograms is UNIVERS No. U-59. 4.2.2 Girth measurements shall be shown on the left-hand side and length measurements on the right-hand side of the pictogram. 4.3 Garment measurements Garm

22、ent measurements shall not be incorporated in the size designation but, where considered of value, they may be indicated separately (see 5.3). 5 Labelling 5.1 Method The size designation of each garment shall be indicated clearly, conspicuously, and in plainly legible form on a label, or on a swing

23、ticket, or on both, Numerals shall, in all cases, be readily discernible. 5.2 Attachment The label or swing ticket shall be securely attached to the garment in a position where it is easily readable. 5.3 Additional information Information additional to the size designation may be separately indicate

24、d on the label, or on the swing ticket, or on both, provided that it does not in any way reduce the prominence and conspicuousness of the size designation. Such additional information may include a size code number, body measurement(s), or garment measurement(s) considered to constitute useful infor

25、mation. 5.4 Examples of labels The examples of labels given in figure 2 and figure 3 illustrate methods of labelling that range from the simple indication on the standard pictogram of the relevant control dimensions to more elaborate forms that provide additional information, such as a garment measu

26、rement or a size code number. Where the size designation is supplemented by a size code number, separation of the two, as illustrated, renders the size code number readily recognizable as being part of a system of a size designation adopted for a limited population group only. SANS 1360-2:2008 Editi

27、on 1.2 6 Figure 1 Standard pictogram SANS 1360-2:2008 Edition 1.2 7 a) Womans jacket Bust girth 96 or Hip girth 104 Height 164 b) Womans coat Bust girth 100 or Hip girth 108 Height 170-176 Coat length 961)c) Womans slacks Hip girth 124 or Waist girth 96 Outside leg length 104 Size code 501)d) Womans

28、 cardigan or Bust girth 94 Figure 2 Examples of labels for womens outerwear 1) Examples of additional information included in accordance with 5.3. SANS 1360-2:2008 Edition 1.2 8 a) Girls skirt Height 158 or Hip girth 88 Waist girth 64 Skirt length 422)b) Girls dress Height 122 or Bust girth 68 Hip g

29、irth 68 Waist girth 601)c) Girls sweater Bust girth 80-84 or Height 152-158 d) Girls swimsuit or Bust girth 72 Hip girth 76 Figure 3 Examples of labels for girls outerwear 2) Examples of additional information included in accordance with 5.3. SANS 1360-2:2008 Edition 1.2 9 Appendix A3)Applicable sta

30、ndardsReference is made to the latest issues of the following standards: ISO 3637, Size designation of clothes Womens and girls outerwear garments. SANS 10184 (SABS 0184), Definitions for and measurement of body dimensions. Appendix B Examples of outerwear garments B.1 Garments covering the upper or

31、 the whole body: a) Coats, topcoats, raincoats. b) Jackets, blazers, tunics, anoraks. c) Dresses, frocks. d) Suits and costumes (two- and three-piece). e) Dressing-gowns and housecoats. f) Overalls, dust-coats. g) Knitwear (pullovers, cardigans, sweaters). h) Swimwear (swimsuits, bathing suits). B.2 Garments covering the lower body only: a) Skirts. b) Trousers, slacks, riding-breeches, ski-trousers. c) Shorts. Standards South Africa 3) The information in the appendices is additional to that in this part of the specification and has been included purely for amplification and guidance.