1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22031-0 SANS 15434:2008Edition 1 ISO/IEC 15434:2006Edition 3SOUTH AFRICAN NATIONAL STANDARD Information technology Automatic identificatio
4、n and data capture techniques Syntax for high-capacity ADC media Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS This national standard is the identical implementation of ISO/IEC 15434:2006
5、and is adopted with the permission of the International Organization for Standardization and the International Electrotechnical Commission. SANS 15434:2008 Edition 1 ISO/IEC 15434:2006 Edition 3 Table of changes Change No. Date Scope National foreword This South African standard was approved by Nati
6、onal Committee SABS SC 71K, Information technology Automatic identification and data capture techniques, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in September 2008. Reference numberISO/IEC 1543
7、4:2006(E)ISO/IEC 2006INTERNATIONAL STANDARD ISO/IEC15434Third edition2006-10-01Information technology Automatic identification and data capture techniques Syntax for high-capacity ADC media Technologies de linformation Techniques didentification et captage automatique des donnes Syntaxe pour support
8、s de CAD haute capacit SANS 15434:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 15434:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or v
9、iewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability
10、in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitabl
11、e for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by an
12、y means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail
13、copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2006 All rights reservedSANS 15434:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 15434:2006(E) ISO/IEC 2006 All rights reserved iiiContents Page Foreword iv In
14、troduction v 1 Scope 1 2 Normative references 1 3 Terms, definitions and documentation notation conventions2 3.1 Terms and definitions .2 3.2 Documentation notation conventions .2 4 Message format2 4.1 Message Envelope.3 4.1.1 Message Header.3 4.1.2 Message Trailer4 4.2 Format Envelope4 4.2.1 Format
15、 Header4 4.2.2 Format Header “00” - Reserved format .6 4.2.3 Format Header “01” - Transportation 6 4.2.4 Format Header “02” - Complete EDI message / transaction .6 4.2.5 Format Header “03” - Structured data using ASC X12 segments 6 4.2.6 Format Header “04” - Structured data using UN/EDIFACT segments
16、 .7 4.2.7 Format Header “05” - Data using GS1 Application Identifiers7 4.2.8 Format Header “06” - Data using ASC MH 10 Data Identifiers7 4.2.9 Format Header “07” - Free form text data .8 4.2.10 Format Header “08” - Structured data using CII syntax rules 8 4.2.11 Format Header “09” - Binary data8 4.2
17、.12 Format Header (“10”- “11”) - Reserved formats.8 4.2.13 Format Header “12” - Data using Text Element Identifiers .9 4.2.14 Format Header (“13”-“99”) - Reserved formats9 4.2.15 Format Trailer.9 4.3 Data format .9 4.3.1 Format “00” (Reserved) 9 4.3.2 Format “01” Carrier sortation and tracking (Tran
18、sportation) .10 4.3.3 Format “02” (Complete EDI message / transaction) 12 4.3.4 Format “03” (Structured data using ASC X12 segments) .12 4.3.5 Format “04” (Structured data using UN/EDIFACT segments) 12 4.3.6 Format “05” (Using GS1 Application Identifiers) .13 4.3.7 Format “06” (Using ASC MH 10 Data
19、Identifiers) .13 4.3.8 Format “07” (Free form text format) 13 4.3.9 Format “08” (Structured data using CII syntax rules)13 4.3.10 Format “09” (Binary data) .13 4.3.11 Format “10”-“11” (Reserved)14 4.3.12 Format “12” (Using Text Element Identifiers).14 4.3.13 Format “13”-“99” (Reserved)14 5 Maintenan
20、ce .14 Annex A (normative) Subset of ISO 646 (Table of hexadecimal and decimal values) .16 Bibliography 17 SANS 15434:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 15434:2006(E) iv ISO/IEC 2006 All rights reservedForeword ISO (t
21、he International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees
22、established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. I
23、n the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standar
24、ds. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements
25、of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 15434 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture
26、techniques. This third edition cancels and replaces the second edition (ISO/IEC 15434:2005), which has been technically revised. SANS 15434:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 15434:2006(E) ISO/IEC 2006 All rights rese
27、rved vIntroduction This International Standard defines the manner in which data is transferred to high-capacity automatic data capture (ADC) media from a suppliers information system and the manner in which data is transferred to the recipients information system. This International Standard does no
28、t define the internal data storage format for specific high-capacity ADC media. This International Standard does not specify the application of data structures provided by a specific data syntax format. The application of the data structure is specified by industry conventions. Users of ADC technolo
29、gies benefit by being able to receive data in a standard form and by being able to provide data in a standard form. Static ADC technologies such as bar code symbologies, magnetic stripe, optical character recognition, surface acoustical wave (SAW) and Weigand effect typically encode a single field o
30、f data. Most applications of these technologies involve the encoding of a single field of data by the supplier of the medium and the subsequent decoding of the data field by the recipient. Encoding single fields of data permits the supplier to perform the encodation from a single field within the su
31、ppliers information system. Decoding single fields of data permits the recipient to input this data into a single field in the recipients information system, in lieu of key entry. High-capacity ADC technologies, such as two-dimensional symbols, RFID transponders, contact memories and smart cards, en
32、code multiple fields of data. These multiple fields are usually parsed by the recipients information system and then mapped to specific fields of data in the recipients information system. This International Standard defines the syntax for high-capacity ADC media, so as to enable ADC users to utiliz
33、e a single mapping utility, regardless of which high-capacity ADC medium is employed. SANS 15434:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .This page is intentionally left blankSANS 15434:2008This s tandard may only be used and print
34、ed by approved subscription and freemailing clients of the SABS .INTERNATIONAL STANDARD ISO/IEC 15434:2006(E) ISO/IEC 2006 All rights reserved 1Information technology Automatic identification and data capture techniques Syntax for high-capacity ADC media 1 Scope This International Standard specifies
35、 a transfer structure, syntax, and coding of messages and data formats when using high-capacity ADC media between trading partners (specifically between suppliers and recipients) and, where applicable, in support of carrier applications, such as bills of lading, and carrier sortation and tracking. T
36、he data encoded according to this International Standard include data which may be used in the shipping, receiving and inventory of transport units; data which may be contained within supporting documentation, in paper or electronic form, related to unit loads or transport packages; data which may b
37、e used in the sortation and tracking of transport units. This International Standard describes the ISO 646 syntax for automatic data capture. This International Standard is not the controlling specification for data structures (e.g. CII) referenced in this International Standard. This International
38、Standard does not supersede or replace any applicable safety or regulatory marking or labelling requirements. This International Standard is to be applied in addition to any other mandated labelling requirements. 2 Normative references The following referenced documents are indispensable for the app
39、lication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 646, Information technology ISO 7-bit coded character set for information interchange ISO/IEC 19762 (all
40、parts), Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary ANS MH10.8.2, ASC MH 10 Data Identifiers and Application Identifiers ANS MH10.8.3, ASC MH 10 Syntax for high capacity ADC media ANS X12, Electronic Data Interchange CII Syntax Rule (Vers
41、3.00), CII Syntax Rule Specifications (3.00) (Electronic Data Interchange Japan) GS1 General Specification, GS1 ATA Common Support Data Dictionary (CSDD), Air Transport Association SANS 15434:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS
42、 .ISO/IEC 15434:2006(E) 2 ISO/IEC 2006 All rights reserved3 Terms, definitions and documentation notation conventions 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 19762 (all parts) apply. 3.2 Documentation notation conventions This Internati
43、onal Standard uses the following typographical conventions in message examples. a) BOLD, ALL CAPITALS Text that must be entered exactly as it appears. (In this International Standard, FS, GS, US, RS, EOTare used to represent non-printable special characters. The ISO 646 representation of special cha
44、racters used in this International Standard can be found in Annex A.) b) italic, lower case Variable Parameters. The user must supply an appropriate value. In some cases default values are recommended in this International Standard. 4 Message format This clause defines how data shall be transferred
45、from a High Capacity ADC Media reading device to the users application software. To allow multiple data Formats to be contained within a data stream, a two level structure of enveloping is employed. The outermost layer of the message is a Message Envelope that defines the beginning and end of the me
46、ssage. Within the Message Envelope are one or more Format Envelopes that contain the data (see Figure 1). Multiple formats in a single message should only be employed with bi-lateral agreements of the trading partners. The Message Envelope shall consist of a Message Header, one or more Format Envelo
47、pe(s), and a Message Trailer (when required). Each Format Envelope within the Message Envelope shall consist of a Format Header, data, formatted according to the rules defined for that Format, and a Format Trailer (when required). SANS 15434:2008This s tandard may only be used and printed by approve
48、d subscription and freemailing clients of the SABS .ISO/IEC 15434:2006(E) ISO/IEC 2006 All rights reserved 3Figure 1 Enveloping Structure Note: Annex A shows the decimal and hexadecimal values of ASCII characters used in this International Standard. 4.1 Message Envelope The Message Envelope defines
49、the start and end of the data contained within the data stream, and provides the following functions: indication that the message contained within this media is formatted in compliance with the rules of this International Standard; indicates the character which has been defined to separate Formats within this Message; provides a unique character to indicate the end of the Message. The structure within a data stream is as follows: a Message, containing one or more Formats; a Format, containi
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1