SANS 15874-2-2004 Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 2 Pipes《冷热水装置用塑料管道系统 聚丙烯(PP) 第2部分 管道》.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ICS 83.140.30; 91.140.60 ISBN 0-626-16003-0 SANS 15874-2:2004 Edition 1 ISO 15874-2:2003 Edition 1SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems

4、 for hot and cold water installations Polypropylene (PP) Part 2: Pipes This national standard is the identical implementation of ISO 15874-2:2003 and is adopted with the permission of the International Organization for Standardization. Published by Standards South Africa 1 dr lategan road groenkloof

5、 private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code +27 12 www.stansa.co.za Standards South Africa This standard may only be used and printed by approved subscription and freemailing clients of the SABS.SANS 15874-2:2004 Edition 1 ISO 15874-2:2003 Edition 1 Table o

6、f changes Change No. Date Scope Abstract Specifies the characteristics of pipes made from polypropylene (PP) for piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water whether or not intended for human consumption (domestic systems) and f

7、or heating systems under operating pressures and temperatures appropriate to the class of application. Keywords buildings, cold-water supply systems, domestic pipework systems, hot-water supply systems, pipelines, pipes, pipework systems, plastics, polypropylene, specifications, transportation, wate

8、r, water supply. National foreword This South African standard was approved by National Committee StanSA SC 5140.14C, Plastics pipes and fittings Polypropylene pressure pipes, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This standard

9、may only be used and printed by approved subscription and freemailing clients of the SABS. Reference number ISO 15874-2:2003(E) ISO 2003INTERNATIONAL STANDARD ISO 15874-2 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 2: Pipes Systmes de

10、 canalisations en plastique pour les installations deau chaude et froide Polypropylne (PP) Partie 2: Tubes This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 15874-2:2003(E) PDF disclaimer This PDF file may contain embedded typefaces. In accor

11、dance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes li

12、censing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for print

13、ing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2003 All rights reserved. Unless otherwise specified, no part of this p

14、ublication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 G

15、eneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2003 All rights reservedThis standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 15874-2:2003(E) ISO 2003 All rights reserv

16、ed iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for whi

17、ch a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all m

18、atters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are cir

19、culated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held respon

20、sible for identifying any or all such patent rights. ISO 15874-2 was prepared by the European Committee for Standardization (CEN) in collaboration with Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 2, Plastics pipes and fittings for

21、water supplies, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). Throughout the text of this document, read “.this European Standard.” to mean “.this International Standard.”. ISO 15874 consists of the following parts, under the general title Plastics

22、 piping systems for hot and cold water installations Polypropylene (PP): Part 1: General Part 2: Pipes Part 3: Fittings Part 5: Fitness for purpose of the system Part 7: Guidance for the assessment of conformity Technical Specification This standard may only be used and printed by approved subscript

23、ion and freemailing clients of the SABS.ISO 15874-2:2003(E) iv ISO 2003 All rights reservedContents page Introductionvi 1Scope1 2Normativere ferences1 3Termsanddefinitions,symbolsandabbreviatedterms.2 4Material.2 4.1Pipematerial2 4.2 Evaluationof s LCL values.2 4.3Influenceonwaterintendedfo rhumanco

24、nsumption6 5Generalcharacteristics. 6 5.1Appearance6 5.2Opacity.6 6Geometricalcharac teristics.6 6.1General.6 6.2Dimensionsofpipe s.7 7Mechanicalcharacteristics.10 8Physicalandchemicalcharacteristics.10 9Performancerequirements11 10Marking.11 10.1Generalrequirements11 10.2Minimumrequiredma rking.12

25、AnnexA (informative) DerivationofS calc,max .13 A.1General.13 A.2Designstre ss.13 A.3 Derivationofmaximumvalueof S calc ( S calc,max )14 A.4 UseofS calc,max todeterminewallthickness.15 Bibliography16 ForewordvThis standard may only be used and printed by approved subscription and freemailing clients

26、 of the SABS.ISO 15874-2:2003(E) ISO 2003 All rights reserved vForeword Thisdocument(ENISO158742:2003)hasbeenprepared byTechnicalCommitteeCEN/TC155“Plasticspi ping systemsandductingsystems”,thesecretariatof whichisheldbyNEN, incollaborationwithTechnicalCommittee ISO/TC138 “Plasticspipes,fittingsandv

27、alvesforthetrans portoffluids“. ThisEuropean Standardshall begiventhestatusofanationalst andard,eitherbypublication ofanidentic altext or byendorsement,atthelatestbyJune2004, andconflicting nationalst andardsshal l be withdrawn atthe latestby December2005. NOTE1ThisstandardwassubmittedforCENenquirya

28、sprE N122022:1995. Thisstandar d ispartofa SystemStandardforplas ticspipingsystemsofaparticularmaterialforaspecified application.Therear e anumberofsuchSys temStandards. SystemStandardsarebas edontheresultsofthe workundertakenin ISO/TC138 “Plasticspipes,fittingsand valvesforthetrans portoffluids“, w

29、hich isaTechnic alCommitteeoftheInternationalOr ganizationfor Standardization( ISO). TheyaresupportedbyseparateStandardson testmethodsto whichreferencesaremadethr oughout the System Standard. TheS ystemStandardsarec onsistent with generals tandardsonfunc tionalr equirementsandrecommended practicesfo

30、rinstallat ion. ENISO15874c onsistsofthefoll owingParts 1) ,underthegeneralti tlePlasticspipingsystemsforhotandcold waterinstallationsPolypropylene(PP) Part1:General Part2:Pipes (thepresentstandard) Part3:Fittings Part5:Fitnessforpurposeofthesystem Part7: Guidancefortheassessmentofconformity (CENISO

31、/TS158747). ThisPartofENISO15874 includesthefoll owing: AnnexA(infor mative):Deriv ationofS calc,max Bibliography Atthedate ofpublicationofthisst andard,SystemStandardsforpipi ngsystemsofotherplas ticsmaterialsusedfor thesa meapplicationarethefoll owing: ENISO15875, Plasticspipingsystemsforhotandcol

32、dwaterinstallations Crosslinkedpolyethylene(PEX) (ISO15875:2003) ENISO15876, Plasticspipingsystemsforhotandcoldwaterinstallations Polybutylene(PB)(ISO15876:2003) ENISO15877, Plasticspipingsystemsforhotandcoldwaterinstallations Chlorinatedpoly(vinylchloride) (PVCC)(ISO15877:2003) Forpipesandfittings

33、w hichhaveconfor medtotherelev antnationalst andardbefore1 st Nove mber2003,asshown bythemanufacturerorbyacer tificationbody,thenationalst andardmayc ontinue toappl yuntil 30 th Nove mber 2005. Accordingto the CEN/CENELEC Internal Regulations,thenationalst andardsorganizationsofthefoll owing countri

34、esareboundto implementthisEuropeanStandard: Austria,Belgium,Czec h Republic,Denmar k,Finland, France,Ger many,Greece,Hungary,Iceland,Ireland,Italy,Luxembourg,Malta, Netherlands, Norway, Portugal, Slovakia,Spain, Sweden,Swi tzerlandandtheUnitedKingdom. 1)ThisSystemStandarddoesnotincorporateaPart 4 An

35、cillaryequipment oraPart6: Guidance forinstallation. Forancillary equipmentseparate standardscanapply.Guidance oninstallationof plastics piping systems madefromdifferent materials, intended tobeusedforhotandcoldwaterinstallations, is given byENV12108 1 .This standard may only be used and printed by

36、approved subscription and freemailing clients of the SABS.ISO 15874-2:2003(E) vi ISO 2003 All rights reservedIntroduction TheSystemStandard,ofwhichthisisPart2,specifiestherequirementsforapipingsystemwhenmadefrom polypropylene(PP).Thepipingsystemisintendedtobeusedforhotandcoldwaterinstallations. Inre

37、spectofpotentialadverseeffectsonthequalityofwaterintendedforhumanconsumption,causedbythe productcoveredbythisstandard: Thisstandardprovidesnoinformationastowhethertheproductmaybeusedwithoutrestrictioninanyofthe MemberStatesoftheEUorEFTA; Itshouldbenotedthat,whileawaitingtheadoptionofverifiableEurope

38、ancriteria,existingnationalregulations concerningtheuseand/orthecharacteristicsofthisproductremaininforce. Requirementsandtestmethodsformaterialandcomponents,otherthanpipes,arespecifiedinPart1andPart3 ofENISO15874:2003.Characteristicsforfitnessforpurpose(mainlyforjoints)arecoveredinPart5.Part7(CEN I

39、SO/TS158747:2003)givesguidancefortheassessmentofconformity. ThispartofENISO15874specifiesthecharacteristicsofpipes.This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 15874-2:2003(E) ISO 2003 All rights reserved 11Scope ThispartofENISO15874spec

40、ifiesthecharacteristicsofpipesmadefrompolypropylene(PP)forpipingsystems intendedtobeusedforhotandcoldwaterinstallationswithinbuildingsfortheconveyanceofwaterwhetherornot intendedforhumanconsumption(domesticsystems)andforheatingsystemsunderoperatingpressuresand temperaturesappropriatetotheclassofappl

41、ication(seeTable1ofENISO1 58741:2003). Thisstandardcoversarangeofserviceconditions(applicationclasses),designpressuresandpipedimension classes.Forvaluesof T D , T max and T mal inexcessofthoseinTable1 ofPart1, thisstandarddoesnotapply. NOTE1 Itistheresponsibilityofthepurchaserorspecifiertomaketheapp

42、ropriateselectionsfromtheseaspects,takingint oaccounttheir particularrequirementsandanyrelevantnationalregulationsandinstallationpracticesorcodes. Italsospecifiesthetestparametersforthetestmethodsreferredtointhisstandard. InconjunctionwiththeotherpartsofENISO15874(seeForeword)itisapplicabletoPPpipes

43、,theirjointsandto jointswithcomponentsofPP,otherplasticsandnonplasticsmaterialsintendedtobeusedforhotandcoldwater installations. Itisapplicabletopipeswithorwithout(a)barrierlayer(s). NOTE2 Inthecaseofplasticspipesprovidedwithathinbarrierlayer,e.g.topreventorgreatlydiminishthediffusionofg asesandthe

44、transmissionoflightintoorthroughthepipewall,thedesignstressrequirementsaretotallymetbythebasepolymer(PP). 2 Normativereferences Thisstandardincorporatesbydatedorundatedreference,provisionsfromotherpublications.Thesenormative referencesarecitedattheappropriateplacesinthetextandthepublicationsareliste

45、dhereafter.Fordated references,subsequentamendmentsto,orrevisionsof,anyofthesepublicationsapplytothisstandardonlywhen incorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthepublicationreferredto applies(includingamendments). EN578, Plasticspipingsystems Plasticspipesandfittings Determinationoftheopacity EN743:1994, Plasticspipingandductingsystems Thermoplasticspipes Determinationofthelongitudinal reversion EN921:1994, Plasticspipingsystems Thermoplasticspipes Determinationofresistancetointernalpressure atconstanttemperature ENISO158741:2003, Plasticspipi