SANS 15874-3-2004 Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 3 Fittings《冷热水装置用塑料管道系统 聚丙烯(PP) 第3部分 配件》.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ICS 83.140.30; 91.140.60 ISBN 0-626-16005-7 SANS 15874-3:2004 Edition 1 ISO 15874-3:2003 Edition 1SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems

4、 for hot and cold water installations Polypropylene (PP) Part 3: Fittings This national standard is the identical implementation of ISO 15874-3:2003 and is adopted with the permission of the International Organization for Standardization. Published by Standards South Africa 1 dr lategan road groenkl

5、oof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code +27 12 www.stansa.co.za Standards South Africa This standard may only be used and printed by approved subscription and freemailing clients of the SABS.SANS 15874-3:2004 Edition 1 ISO 15874-3:2003 Edition 1 Tabl

6、e of changes Change No. Date Scope Abstract Specifies the characteristics of fittings for polypropylene (PP) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for

7、heating systems under design pressures and temperatures according to the class of application. Keywords buildings, cold-water supply systems, domestic pipework systems, fittings (pipes), hot-water supply systems, pipelines, pipes, pipework systems, plastics, polypropylene, specifications, transporta

8、tion, water, water supply. National foreword This South African standard was approved by National Committee StanSA SC 5140.14C, Plastics pipes and fittings Polypropylene pressure pipes, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This

9、 standard may only be used and printed by approved subscription and freemailing clients of the SABS. Reference number ISO 15874-3:2003(E) ISO 2003INTERNATIONAL STANDARD ISO 15874-3 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 3: Fittin

10、gs Systmes de canalisations en plastique pour les installations deau chaude et froide Polypropylne (PP) Partie 3: Raccords This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 15874-3:2003(E) PDF disclaimer This PDF file may contain embedded typ

11、efaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infr

12、inging Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were opt

13、imized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2003 All rights reserved. Unless otherwise specified, n

14、o part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case post

15、ale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2003 All rights reservedThis standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 15874-3:2003(E) ISO 2003 A

16、ll rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a

17、 subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commissio

18、n (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical co

19、mmittees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall no

20、t be held responsible for identifying any or all such patent rights. ISO 15874-3 was prepared by the European Committee for Standardization (CEN) in collaboration with Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 2, Plastics pipes a

21、nd fittings for water supplies, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). Throughout the text of this document, read “.this European Standard.” to mean “.this International Standard.”. ISO 15874 consists of the following parts, under the genera

22、l title Plastics piping systems for hot and cold water installations Polypropylene (PP): Part 1: General Part 2: Pipes Part 3: Fittings Part 5: Fitness for purpose of the system Part 7: Guidance for the assessment of conformity Technical Specification This standard may only be used and printed by ap

23、proved subscription and freemailing clients of the SABS.ISO 15874-3:2003(E) iv ISO 2003 All rights reservedContents Introduction.vi 1Scope1 2Normativere ferences1 3Termsanddefinitions,symbolsandabbreviatedterms.2 4Materialcharacteristics3 4.1Plasticsfittingmaterial.3 4.2Metallicfittingmaterial5 4.3I

24、nfluenceonwaterintendedfo rhumanconsumption5 5Generalcharacteristics.5 5.1Appearance5 5.2Opacity.5 6Geometricalcharac teristics.6 6.1General.6 6.2Dimensionsofsocketsforsocketfusionandelectrofusionfittings6 6.3Dimensionsofmetallicfittings9 7Mechanicalcharacteristicsofplasticsfittings.9 7.1General.9 7

25、.2FittingmaterialidenticaltothePPpipeco mpound9 7.3FittingmadefromPPnotidenticaltothePPpipecompound.9 7.4FittingsmadefromplasticsotherthanPP.9 8Physicalandchemicalcharacteristicsofplasticscomponents12 9Sealingelements.12 10Performancerequirements12 11Marking.13 11.1Generalrequirements13 11.2Minimumr

26、equiredma rking.13 Bibliography14 ForewordvThis standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 15874-3:2003(E) ISO 2003 All rights reserved v Foreword Thisdocument(ENISO158743:2003)hasbeenprepared byTechnicalCommitteeCEN/TC155“Plasticspi ping s

27、ystemsandductingsystems”,thesecretari atof whichisheldbyNEN, incollaborationwithTechnicalCommittee ISO/TC138 “Plasticspipes, fittingsa ndvalves forthetrans portof fluids“. NOTEThisdraftwassubmittedfo rCENenquiryasprE N122023:1995. ThisEurop ean Standardshall begiven thes tatusofanationalst andard,ei

28、ther bypublication ofanidenticaltextor byendorse ment,atthelatestbyJune2004, andconflicting nationals tandardsshal l be withdrawn atthe latestby December2005. Thisstandar d ispartof a SystemStandard forplas ticspipingsystemsofaparticular material foraspe cified application.Therear e anumberofsuch Sy

29、stemStandards. SystemStandardsarebas edontheresultsofth e workbeing undertakenin ISO/TC138 “Plasticspipes, fittings and valvesforthetr ansportof fluids“, which isaTechnic alCommitteeoftheInterna tionalOrga nisationfor Standardization( ISO). Theyaresu pportedbyseparateStandardson test methodsto which

30、re ferencesare madethr oughout the System Standard. TheS ystemStandardsarec onsistent with generals tandardsonfunc tionalr equirementsandreco mmended practicesfor installation. ENISO15874:2003consistsofthefoll owing Parts 1) ,underthegener altitl e: Plasticspipingsystemsforhotand coldwaterinstallati

31、onsPolypropylene(PP) Part1:General Part2:Pipes Part3:Fittings (thepresentstandard) Part5:Fitnessforpurposeofthesystem Part7:Guidancefortheassessmentofconformity (publishedasCENISO/TS158747). ThisPartofEN ISO15874 includesa Bibliography. Atthedate ofpublicationofthisst andard,SystemStandardsforpipi n

32、gsystemsofotherplas ticsmaterialsusedfor thesa meap plicationin cludethefoll owing: ENISO15875, Plasticspipingsystemsforhotandcoldwaterinstallations Crosslinkedpolyethylene(PEX) (ISO15875:2003) EN ISO15876, Plasticspipingsystemsforhotandcoldwaterinstallations Polybutylene(PB)(ISO15876:2003) ENISO158

33、77, Plasticspipingsystemsforhotandcoldwaterinstallations Chlorinatedpoly(vinylchloride) (PVCC)(ISO15877:2003) Forpipesandfittings w hichhaveconfor medtotherelev antnationalst andardbefore1 st November,2003, as shownbythemanufactureror byacer tificationbody,thenationalst andard mayco ntinue toappl yu

34、ntil30 th November, 2005. Accordingto the CEN/CENELEC Internal Regulations,t henationalst andardsorganiza tionsofthefoll owing countriesareboundto implementthisEuro peanStandard: Austria,Belgiu m,Czec h Republic,Denmar k,Finland, France,Ger many,Greece,Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,

35、Ne therlands, Norway, Portugal, Slovakia,Spain, Sweden,Swi tzerlandandtheUnitedKin gdom. 1) ThisSystemStandard doesnotincorporateaPart4 Ancillaryequipment oraPart6 Guidanceforinstallation .Forancillary equipmentseparate standardscanapply.Guidance oninstallationof plastics piping systems madefromdiff

36、erent materials intended tobeusedforhotandcoldwaterinstallation s is givenbyEN V 12108 1 .This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 15874-3:2003(E) vi ISO 2003 All rights reservedIntroduction TheSystemStandardofwhichthisisPart3,specif

37、iestherequirementsforapipingsystemwhenmadefrom polypropylene(PP).Thepipingsystemisintendedtobeusedforhotandcoldwaterinstallations. Inrespectofpotentialadverseeffectsonthequalityofwaterintendedforhumanconsumption,causedbythe productcoveredbythisstandard: Thisstandardprovidesnoinformationastowhetherth

38、eproductmaybeusedwithoutrestrictioninanyofthe MemberStatesoftheEUorEFTA; Itshouldbenotedthat,whileawaitingtheadoptionofverifiableEuropeancriteria,existingnationalregulations concerningtheuseand/orthecharacteristicsofthisproductremaininforce. Requirementsandtestmethodsformaterialsandcomponents,othert

39、hanfittings,arespecifiedinPart1 andPart2 ofENISO15874:2003.Characteristicsforfitnessforpurpose(mainlyforjoints)arecoveredinPart5.Part7(CEN ISO/TS158747:2003)givesguidancefortheassessmentofconformity. ThisPartofENISO15874specifiesthecharacteristicsofthefittings.This standard may only be used and prin

40、ted by approved subscription and freemailing clients of the SABS.ISO 15874-3:2003(E) ISO 2003 All rights reserved 11Scope ThisPartofENISO15874specifiesthecharacteristicsoffittingsforpolypropylene(PP)pipingsystemsintendedto beusedforhotandcoldwaterinstallationswithinbuildingsfortheconveyanceofwater,w

41、hetherornotintended forhumanconsumption(domesticsystems)andforheatingsystemsunderdesignpressuresandtemperatures accordingtotheclassofapplication(seeTable1ofENISO158741:2003). Thisstandardcoversarangeofserviceconditions(applicationclasses)anddesignpressureclasses.Forvaluesof T D , T max and T mal ine

42、xcessofthoseinTable1 ofPart1, thisstandarddoesnotapply. NOTE Itistheresponsibilityofthepurchaserorspecifiertomaketheappropriateselectionsfromtheseaspects,takinginto accounttheir particularrequirementsandanyrelevantnationalregulationsandinstallationpracticesorcodes. Italsospecifiestheparametersforthe

43、testmethodsreferredtointhisstandard. InconjunctionwiththeotherpartsofENISO15874(seeForeword)itisapplicabletofittingsmadefromPPandto fittingsmadefromothermaterialswhichareintendedtobefittedtopipesconformingtoENISO158742forhot andcoldwaterinstallationsandwherebythejointsconformtotherequirementsofENISO

44、158745. ItisalsoapplicabletofittingsmadefromalternativematerialswhichwhenfittedtopipesconformingtoPart2, conformtotherequirementsofPart5ofENISO15874. Thisstandardisapplicabletofittingsofthefollowingtypes: socketfusionfittings electrofusionfittings mechanical fittings fittingswithincorporatedinserts

45、2 Normativereferences Thisstandardincorporatesbydatedorundatedreference,provisionsfromotherpublications.Thesenormative referencesarecitedattheappropriateplacesinthetextandthepublicationsarelistedhereafter.Fordated references,subsequentamendmentsto,orrevisionsof,anyofthesepublicationsapplytothisstand

46、ardonlywhen incorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthepublicationreferredto applies(includingamendments). EN578, Plasticspipingsystems PlasticspipesandfittingsDeterminationoftheopacity. EN6811, Elastomericseals Materialsrequirementsforpipejointsealsusedinwateranddrai